Bart Van Der Meerssche
|
34196cc1f1
|
[fsync] generate a flukso.service file for avahi
|
2011-03-06 01:05:15 +01:00 |
Bart Van Der Meerssche
|
7b5b64abf8
|
[fsync] check whether sensor exists and has been enabled when symlinking
|
2011-03-06 00:25:14 +01:00 |
Bart Van Der Meerssche
|
5681ec612f
|
[fsync] update sensor symlinks to cgi-script
|
2011-03-05 20:02:15 +01:00 |
Bart Van Der Meerssche
|
5a2122a0c5
|
[httpclient] name clash: error is alread used by the basic library in Lua
|
2011-03-05 10:09:07 +01:00 |
Bart Van Der Meerssche
|
a826343f6c
|
[luci] allow httpclient to perform peer certificate validation
|
2011-03-05 00:07:56 +01:00 |
Bart Van Der Meerssche
|
e5c1cd9f00
|
[luci] select cyassl as luci crypto library
|
2011-03-05 00:06:59 +01:00 |
Bart Van Der Meerssche
|
a00dce9563
|
[api] add a POST method to sensor/xyz for submitting measurement values
|
2011-03-04 18:30:58 +00:00 |
Bart Van Der Meerssche
|
62b4c7aadf
|
[openwrt] practicing ASCII art
|
2011-02-26 00:09:24 +01:00 |
Bart Van Der Meerssche
|
3bb1345b29
|
[avr] wrap setup functions in a cli/sei pair
|
2011-02-17 23:49:54 +01:00 |
Bart Van Der Meerssche
|
18d91b024f
|
[avr] throttle back the clock when in power-loss mode
|
2011-02-17 23:48:31 +01:00 |
Bart Van Der Meerssche
|
e3de39f026
|
[fluksod] allow counter to wrap around in WAN branch
|
2011-02-17 00:11:21 +01:00 |
Bart Van Der Meerssche
|
5df1cae92c
|
[avr] subsitute eeprom_write_block for eeprom_update_block so that a byte is written only when it differs from the value stored in EEPROM
|
2011-02-16 17:33:29 +01:00 |
Bart Van Der Meerssche
|
acf658dd26
|
[avr] wrap eeprom_read_blocks in a cli/sei pair
|
2011-02-16 16:37:16 +01:00 |
Bart Van Der Meerssche
|
a90b7a8dce
|
[avr] connect the analog comp to the input capture noise canceler for spike suppression
|
2011-02-15 23:26:54 +01:00 |
Bart Van Der Meerssche
|
35e79ca1bf
|
[avr] double-check the ACO to protect against spikes on the sensing circuit
|
2011-02-15 22:52:46 +01:00 |
Bart Van Der Meerssche
|
4fc914558f
|
[avr] enable brown-out counter
|
2011-02-14 20:53:34 +01:00 |
Bart Van Der Meerssche
|
efda61d08a
|
[fsync] fix typo
|
2011-02-12 20:38:23 +01:00 |
Bart Van Der Meerssche
|
0878114479
|
[spid] double Rx/Tx delay to 20ms to accomodate for gd commands
|
2011-02-12 20:03:29 +01:00 |
Bart Van Der Meerssche
|
9deaf89d04
|
[avr] make fdude default programmer for rprogram target
|
2011-02-12 19:56:15 +01:00 |
Bart Van Der Meerssche
|
7e99548842
|
[luad] add an Erlang-style supervisior to the daemon
|
2011-02-12 19:34:10 +01:00 |
Bart Van Der Meerssche
|
36746544ee
|
[fdude] wraps avrdude in an spidev resource lock
|
2011-02-12 15:27:01 +01:00 |
Bart Van Der Meerssche
|
7fba026ddb
|
[spid + fsync] add support for commit command
|
2011-02-12 12:36:53 +01:00 |
Bart Van Der Meerssche
|
849c671175
|
[spid] set SPI_TX_RX_DELAY_NS to 10ms, down from 100ms
|
2011-02-12 11:47:31 +01:00 |
Bart Van Der Meerssche
|
cbc7949d95
|
[openwrt] add init.d script to flukso package
|
2011-02-03 12:28:36 +01:00 |
Bart Van Der Meerssche
|
9e8b7680b6
|
[restful] port local JSON/REST interface to v2
|
2011-02-03 12:27:24 +01:00 |
Bart Van Der Meerssche
|
b69a4d5bdd
|
[fluksod] fix bug in pulse logic
|
2011-02-03 12:25:52 +01:00 |
Bart Van Der Meerssche
|
8b7cc4510a
|
[busybox] enable ip command for use in horst shell script
|
2011-02-03 12:23:00 +01:00 |
Bart Van Der Meerssche
|
8d2ccb8979
|
[avrdude] patch avrdude to work with inverted logic on RST and SCK lines
|
2011-02-03 12:21:44 +01:00 |
Bart Van Der Meerssche
|
a1b981e4f8
|
[avr] switch avr to SPI mode 2 (inverted SCK) for new level-shifer
|
2011-02-03 12:20:24 +01:00 |
Bart Van Der Meerssche
|
f99ea292ff
|
[avr] write sensor data to EEPROM when power-loss is detected
|
2011-02-03 12:17:33 +01:00 |
Bart Van Der Meerssche
|
e842040395
|
[avr + avrdude] switching to m168p hardware
|
2011-02-03 12:15:41 +01:00 |
Bart Van Der Meerssche
|
893cb4f446
|
[fluksod] port remaining coroutines to v2
|
2011-01-30 22:57:37 +01:00 |
Bart Van Der Meerssche
|
17b8137e3d
|
[fluksod] add wan and lan buffer coroutines
|
2011-01-30 17:21:31 +01:00 |
Bart Van Der Meerssche
|
99aee26dba
|
[fluksod] first commit for the born-again fluksod
|
2011-01-30 11:52:35 +01:00 |
Bart Van Der Meerssche
|
884a7d859a
|
[spid + fsync] change CTRL and DAEMON paths to point to spid
|
2011-01-30 10:18:19 +01:00 |
Bart Van Der Meerssche
|
069a8540b0
|
[luci] backport json decode/encode string functions from 0.10
|
2011-01-29 19:53:41 +01:00 |
Bart Van Der Meerssche
|
23b47bd955
|
[avr + fsync] check against MAX_ANALOG_SENSOR
|
2011-01-28 21:28:43 +01:00 |
Bart Van Der Meerssche
|
13fad26051
|
[avr] add macro ENABLED(x) and STATE_POWER_LOCK
|
2011-01-28 20:53:18 +01:00 |
Bart Van Der Meerssche
|
55ecdd3451
|
[fsync] enable/disable cmd works on sensors, not on ports
|
2011-01-28 20:38:19 +01:00 |
Bart Van Der Meerssche
|
035bc2d4fe
|
[avr] cmd parameter checking for enable/disable
|
2011-01-28 16:30:50 +01:00 |
Bart Van Der Meerssche
|
3cff549f8c
|
[fsync] print clearly that a config error has occurred
|
2011-01-28 14:48:56 +01:00 |
Bart Van Der Meerssche
|
8ff7770f0a
|
[fsync] add port numbering check for phy_to_log
|
2011-01-28 14:43:55 +01:00 |
Bart Van Der Meerssche
|
688df77ffa
|
[fsync] add an enable option to each sensor in the uci file
|
2011-01-28 12:51:10 +01:00 |
Bart Van Der Meerssche
|
cf5af8ec0b
|
[fsync] include copyright header
|
2011-01-28 11:17:21 +01:00 |
Bart Van Der Meerssche
|
62f36ce02d
|
[avr] add cmd check on sensor id
|
2011-01-28 10:57:26 +01:00 |
Bart Van Der Meerssche
|
9fbbb99a88
|
[avr] check state flags in main loop for all sensors
|
2011-01-28 10:45:50 +01:00 |
Bart Van Der Meerssche
|
d870088415
|
[fluksod] improved message arg checking
|
2011-01-28 10:41:55 +01:00 |
Bart Van Der Meerssche
|
fd51388300
|
[fluksod] create empty table for arg when not called from the Lua interpreter
|
2011-01-28 10:14:17 +01:00 |
Bart Van Der Meerssche
|
4e4f4a8f88
|
[fsync] first implementation of fsync command: pushes the flukso uci config to the sensor board
|
2011-01-27 10:46:29 +01:00 |
Bart Van Der Meerssche
|
78b1ec3be3
|
[avr + fluksod] add per-port enable/disable commands
|
2011-01-26 14:08:46 +01:00 |