move flipdot functions into class

This commit is contained in:
interfisch 2023-01-31 22:50:25 +01:00
parent 7a5d35f3e1
commit 1350822ffe
1 changed files with 20 additions and 186 deletions

View File

@ -1,77 +1,25 @@
#include <Arduino.h> #include <Arduino.h>
#define CHECK_BIT(var,pos) ((var) & (1<<(pos)))
/* #include "flipdot.h"
D7 - Ser (data)
D5 - clock
D1 - _OE
D2 - latch
D3 - _clear
*/
//Pins connected to Shift registers on own controller board
#define PIN_DATA 13
#define PIN_CLK 14
#define PIN_OE 27 //active low
#define PIN_LATCH 26
//Pins connected to stuff on annax driver board Flipdot flipdot;
#define PIN_DATA_DRVBRD 33
#define PIN_CLK_DRVBRD 32
//#define PIN_CLEAR 25 //active low
#define PIN_DRIVE 25 //enables 12v to panels via transistor
#define PIN_CLEAR 12 //connects CLEAR Pin from Annax board to GND (clears column)
#define NUMPANELS 1
void shiftOutSlow(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val);
bool clearSelectedColumn();
bool setSelectedDot();
void selectColumnClear(uint8_t selcolumn);
void selectColumnSet(uint8_t selcolumn);
void selectColumn(uint8_t selcolumn, bool clear);
bool HBridgeOK();
void shiftData();
void resetColumns();
unsigned long loopmillis=0; unsigned long loopmillis=0;
unsigned long last_update=0; unsigned long last_update=0;
#define UPDATE_INTERVAL 10 #define UPDATE_INTERVAL 10
void setup() { void setup() {
pinMode(PIN_DATA, OUTPUT); flipdot.init();
pinMode(PIN_CLK, OUTPUT);
pinMode(PIN_OE, OUTPUT);
pinMode(PIN_LATCH, OUTPUT);
pinMode(PIN_CLEAR, OUTPUT);
pinMode(PIN_DRIVE, OUTPUT);
pinMode(PIN_DATA_DRVBRD, OUTPUT);
pinMode(PIN_CLK_DRVBRD, OUTPUT);
digitalWrite(PIN_OE, HIGH); //Active Low
digitalWrite(PIN_LATCH, LOW);
digitalWrite(PIN_DRIVE, LOW);
Serial.begin(115200); Serial.begin(115200);
} }
int countz=0; int countz=0;
uint16_t row; //controls shift registers on own controller pcb
uint8_t col[7]; //column drivers and shift registers on annax pcb
void loop() { void loop() {
loopmillis = millis(); loopmillis = millis();
@ -81,14 +29,14 @@ void loop() {
static bool init=false; static bool init=false;
if (!init) { if (!init) {
delay(2000); delay(2000);
row=0; flipdot.row=0;
Serial.println("Clearing Display"); Serial.println("Clearing Display");
for (int l=0;l<25;l++) { for (int l=0;l<25;l++) {
selectColumnClear(l%25); flipdot.selectColumnClear(l%25);
shiftData(); flipdot.shiftData();
if (!clearSelectedColumn()) { if (!flipdot.clearSelectedColumn()) {
Serial.println("Error clearing column!"); Serial.println("Error clearing column!");
}else{ }else{
Serial.println("Cleared"); Serial.println("Cleared");
@ -115,23 +63,29 @@ void loop() {
//cycle testing set dots //cycle testing set dots
selectColumnSet(countz/16); //lower column number is on the left flipdot.selectColumnSet(countz/16); //lower column number is on the left
row=pow(2, (countz)%16);//low significant bits are lower rows (when connector at top) flipdot.row=pow(2, (countz)%16);//low significant bits are lower rows (when connector at top)
Serial.print("Row="); Serial.print(row); Serial.print(" Col="); /*Serial.print("Row="); Serial.print(row); Serial.print(" Col=");
for (uint8_t i=0;i<7;i++) { for (uint8_t i=0;i<7;i++) {
Serial.print(","); Serial.print(col[i]); Serial.print(","); Serial.print(col[i]);
} }
Serial.println(); Serial.println();*/
//reset pin on ribbon cable high (12Vpullup/open), then low (via Transistor) //reset pin on ribbon cable high (12Vpullup/open), then low (via Transistor)
unsigned long starttime=micros();
shiftData(); flipdot.shiftData();
setSelectedDot(); flipdot.setSelectedDot();
unsigned long shiftduration=micros()-starttime;
Serial.println("");
Serial.print("Duration="); Serial.println(shiftduration);
@ -148,123 +102,3 @@ void loop() {
} }
#define SHIFTDELAYMICROS 100
void shiftOutSlow(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val)
{
uint8_t i;
for (i = 0; i < 8; i++) {
if (bitOrder == LSBFIRST)
digitalWrite(dataPin, !!(val & (1 << i)));
else
digitalWrite(dataPin, !!(val & (1 << (7 - i))));
delayMicroseconds(SHIFTDELAYMICROS);
digitalWrite(clockPin, HIGH);
delayMicroseconds(SHIFTDELAYMICROS);
digitalWrite(clockPin, LOW);
delayMicroseconds(SHIFTDELAYMICROS);
}
}
void selectColumnClear(uint8_t selcolumn) {
selectColumn(selcolumn, true);
}
void selectColumnSet(uint8_t selcolumn) {
selectColumn(selcolumn, false);
}
void selectColumn(uint8_t selcolumn, bool clear) {
uint8_t sc_bit=3-(selcolumn%4); //each two shift registers control four columns
uint8_t sc_byte=selcolumn/4;
resetColumns();
col[sc_byte]=pow(2, (sc_bit*2+clear)); // possible numbers for clear=false: 1,4,16,64
}
bool clearSelectedColumn() {
//Clear Columns
if (row!=0) {
return 0; //error. row is selected (short circuit!)
}
for (uint8_t cc=0;cc<7;cc++) {
//Serial.print("checking cc="); Serial.println(cc);
for (uint8_t i=0;i<8;i+=2) {
if (CHECK_BIT(col[cc],i)) {
Serial.print("Error on bit ");
Serial.print(i); Serial.print(" col="); Serial.println(cc);
return 0; //a column is set to ground (should not be set for clear column)
}
}
}
digitalWrite(PIN_DRIVE, HIGH);
digitalWrite(PIN_CLEAR, HIGH);
delay(50);
digitalWrite(PIN_CLEAR, LOW);
digitalWrite(PIN_DRIVE, LOW);
return 1;
}
bool setSelectedDot() {
for (uint8_t cc=0;cc<7;cc++) {
//Serial.print("checking cc="); Serial.println(cc);
for (uint8_t i=1;i<8;i+=2) {
if (CHECK_BIT(col[cc],i)) {
Serial.print("Error on bit ");
Serial.print(i); Serial.print(" col="); Serial.println(cc);
return 0; //a column is set to ground (should not be set for clear column)
}
}
}
if (!HBridgeOK) {
return 0;
}
digitalWrite(PIN_OE, LOW); //Active Low
digitalWrite(PIN_DRIVE, HIGH);
delay(10);
digitalWrite(PIN_OE, HIGH); //Active Low
digitalWrite(PIN_DRIVE, LOW);
return 1;
}
bool HBridgeOK() {
for (uint8_t cc=0;cc<7;cc++) {
//Serial.print("checking cc="); Serial.println(cc);
for (uint8_t i=0;i<8;i+=2) {
if (CHECK_BIT(col[cc],i) && CHECK_BIT(col[cc],i+1)) {
Serial.print("Short circuit on bit ");
Serial.print(i); Serial.print(" col="); Serial.println(cc);
return 0; //a column is set to ground (should not be set for clear column)
}
}
}
return 1;
}
void shiftData() { //send out all data to shift registers
//select Rows via shift registers on own controller board
shiftOutSlow(PIN_DATA, PIN_CLK, LSBFIRST, row&0xff); //lower byte
shiftOutSlow(PIN_DATA, PIN_CLK, LSBFIRST, row>>8); //LSBFIRST= LSB is QH, bit 8 is QA. //upper byte
digitalWrite(PIN_LATCH, HIGH);
delayMicroseconds(100);
digitalWrite(PIN_LATCH, LOW);
//Select Columns via Shift registers
for (uint8_t i=0;i<7;i++) {
shiftOutSlow(PIN_DATA_DRVBRD, PIN_CLK_DRVBRD, LSBFIRST, col[6-i]);
}
}
void resetColumns() {
for (uint8_t i=0;i<7;i++) {
col[i]=0;
}
}