f2a4031e2c
Revert "Adds APA102 to CI"
...
Unfortunately the "build.extra_flags" option doesn't include the USB flags specified in the boards.txt file, overwriting them instead which breaks compilation with the Leonardo. Reversing this until I can think of a better solution. This reverts commit bd8c3f6739
2018-10-18 18:41:56 -04:00
bd8c3f6739
Adds APA102 to CI
2018-10-18 18:19:00 -04:00
e7175f82e2
Adds clock pin support for 4-wire strips
2018-10-18 17:49:43 -04:00
0ffd98768e
Refactor data pin as define
...
Allows putting the clock pin definition next to it
2018-10-18 17:49:43 -04:00
173470ff31
Fixes unused variable warning for serial flush
2018-10-18 16:09:08 -04:00
79edc6911d
Decreased default timeout
...
2:30 is a little long, don't you think?
2017-12-04 19:51:02 -05:00
564637b1db
Added 'off' setting for serial timeout
2017-12-04 19:43:20 -05:00
061ac5edfd
Fixed serial timeout overflow
2017-12-04 19:26:35 -05:00
0b28f24b2e
Evaluate timeouts on the second
2017-12-04 19:19:04 -05:00
aacedb9725
Moved 'clear on start' position in settings list
...
Emphasis on serial flush being enabled by default. Also looks better
visually.
2017-06-08 17:51:43 -04:00
fc4ccd693e
Added mode reset during LED clear
...
Prevents partial frames being shown if the LEDs are cleared in the
middle of data parsing.
2017-06-08 17:47:19 -04:00
4cb6aa1096
Removed 'max available' comment for baud rate
...
The code works at higher baud rates. My setup, currently, runs at 250000
baud.
2017-06-08 17:16:55 -04:00
84d5813852
Enabled 'serial flush' by default
2017-06-08 17:10:57 -04:00
cbc5252391
Removed 'protocol' from header comment
2017-06-08 17:06:36 -04:00
4bcf36b6cc
Changed mode to use enum
2017-06-08 17:04:22 -04:00
c559b3949f
Added serial buffer flush option
2017-06-08 16:28:17 -04:00
ed8eab001b
Added LGPL license
...
While the program is already licensed under LGPL, adding into the
program file itself to be clear.
2017-06-08 15:58:47 -04:00
edf0fef088
Increased max number of LEDs
...
21,845 should be the new max (untested)
2017-06-08 15:40:09 -04:00
d46782ca68
Removed date
...
No reason to keep track in both vc and the file
2017-06-08 15:34:57 -04:00
65e26ed88f
Updated date
2017-05-05 09:18:27 -04:00
203abb8740
Added additional comments
2017-05-05 09:16:01 -04:00
e9092c39fe
Removed 'loop' avoidance
...
Cleans up the code slightly. If the compiler is smart, the functions are
inlined regardless.
2017-05-05 09:05:47 -04:00
0e16794589
Changed 'SerialTimeout' to use seconds
...
More intuitive to set, no change in functionality
2017-05-05 08:20:23 -04:00
92e65abde7
Nested serial timeout check
...
Should give a significant performance improvement, reducing the delay
before a received byte is processed. Limits timeout periods to
increments of 1000, though.
2017-05-05 08:07:35 -04:00
92362303b8
Removed 'bytesRemaining' check
...
Slight efficiency improvement. In data mode bytes remaining is always
greater than 0, because the LED count is always set to greater than 0 in
the header setting. When it reaches 0 mode is immediately switched.
2017-05-05 07:54:41 -04:00
bd87f5f23b
Guarded magic word check if statements
...
Not explicitly needed, but no reason not to protect it
2017-05-05 07:33:00 -04:00
6910e162d7
Separated adalight into functions
...
Makes the code more readable and easier to modify
2017-05-05 07:28:29 -04:00
ec44b9335f
Added DEBUG_FPS macro
2017-05-05 05:40:40 -04:00
d42a83be45
Cleaned up debug LED implementation
...
Cleaner to use, and should be easier to add elsewhere in the future
2017-05-03 12:48:48 -04:00
4931d955ed
Update date
2017-04-23 04:35:10 -04:00
e57c61b1ea
Added static keywords to Adalight func variables
...
Should not be strictly necessary, but it was careless to omit them.
2017-04-23 04:32:03 -04:00
c24abb7393
Set mode variable as static
...
Chasing what I believe is a memory allocation issue, related to large
numbers of LEDs (#9 )
2017-04-19 21:31:39 -04:00
79c514bd59
Added DEBUG_LED feature
2017-04-18 22:52:37 -04:00
8688131d6c
Updated date
2017-04-08 09:57:42 -04:00
4b92761bee
Merge branch 'master' into no-buffer
2017-04-08 09:55:21 -04:00
91223e91e8
indexOut incremented independent of outPos
...
This resolves issue #5
2017-03-28 01:03:25 -04:00
b13d9f67c7
Changed 'outPos' to 16 bit
2017-03-27 22:59:53 -04:00
84fef87d35
Check if data can latch immediately
...
Prior to this change, code would wait for an additional byte before
latching.
2017-03-27 19:37:49 -04:00
eba7bdb73e
Changed MODE_DATA definition
...
Just because.
2017-03-27 19:26:36 -04:00
a766fb4910
Rewrote Adalight code to no longer use 256 byte buffer
...
The buffer was only being used to store the header information before
processing, otherwise data was retrieved immediately. Buffer and support
variables were causing more problems than anything else.
2017-03-27 19:20:55 -04:00
e14a46c63e
Duplicated loop function use comment
...
It takes slightly more space to duplicate the comment vs using an obtuse
reference to find another comment buried in the code.
2017-03-27 17:37:50 -04:00
3f62027cf0
Fixed whitespace
...
Tab > space.
2017-03-27 17:35:44 -04:00
cb8be4a190
Updated date
2017-03-27 15:22:53 -04:00
972f0e7d0e
Removed debug serial lines
2017-03-27 15:20:02 -04:00
47305050b8
Added 'clear on start' flag
2017-03-27 15:14:02 -04:00
8485478da5
Updated adalight data types
2017-03-19 18:53:10 -04:00
b591ed106a
Cleaned up header settings
2017-03-19 18:48:14 -04:00
090532f841
Changed settings to use constants
...
For type safety
2017-03-19 15:04:36 -04:00
1a2b6b8a7b
Rewrote calibration flag description
2016-12-21 14:13:59 -05:00
2e1e3793a6
Removed byline in arduino header comment
2016-12-21 13:23:19 -05:00
David Madison