453 lines
14 KiB
C++
453 lines
14 KiB
C++
/*
|
|
* Wemos d1 mini
|
|
* Flash Size: 4M (1M SPIFFS)
|
|
*/
|
|
|
|
#include <Homie.h>
|
|
#define FW_NAME "tischlicht"
|
|
#define FW_VERSION "1.0.1"
|
|
|
|
/*
|
|
* To Update configuration (wifi credentials) from data/homie/config.json:
|
|
* Connect to serial. On ESP-12E connect flash jumper
|
|
* Apply Power to ESP
|
|
* Optional: upload sketch
|
|
* Tools - Sketch Data Upload
|
|
* Remove jumper
|
|
* /
|
|
|
|
//http://homieiot.github.io/homie-esp8266/docs/develop/configuration/json-configuration-file/
|
|
//curl -X PUT http://homie.config/config -d @config.json --header "Content-Type: application/json"
|
|
/*Example data/homie/config.json
|
|
{
|
|
"name": "pringleslight",
|
|
"device_id": "pringleslight",
|
|
"wifi": {
|
|
"ssid": "CTDO-IoT",
|
|
"password": "12345678"
|
|
},
|
|
"mqtt": {
|
|
"host": "raum.ctdo.de",
|
|
"port": 1883,
|
|
"auth": false
|
|
},
|
|
"ota": {
|
|
"enabled": false
|
|
}
|
|
}
|
|
*/
|
|
|
|
HomieNode lightNode("light", "light");
|
|
|
|
//(pin x) nunbering CCW starting with rst
|
|
|
|
|
|
#define LED_WW 14 //D5 = GPIO14 (pin5)
|
|
#define LED_CW 12 //D6 = GPIO12 (pin6)
|
|
|
|
#define BTN_A 13 //D7 = GPIO13 (pin 7)
|
|
#define BTN_B 15 //D8 = GPIO15 (pin 10)
|
|
|
|
/*
|
|
* VCC (pin 8)
|
|
* GND (pin 9)
|
|
*/
|
|
|
|
#define PWM_MAX 1023 //10 bit dac
|
|
|
|
boolean sleep=true; //true turns lights off
|
|
|
|
float set_brightness=0; //0 to 1
|
|
#define BRIGHTNESS_MIN 0.0
|
|
#define BRIGHTNESS_MAX 2.0 //if temperature is in between both strips brightness of 2 means both are at full power. otherwise brightness will be clipped
|
|
float brightness=set_brightness;
|
|
float brightness_change_per_loop=100; //will be calculated by Handler
|
|
|
|
|
|
#define TEMPERATURE_MIN 2760 //temperature of warm white leds
|
|
#define TEMPERATURE_MAX 5640//temperature of cold white leds
|
|
float set_temperature=(TEMPERATURE_MAX+TEMPERATURE_MIN)/2;
|
|
float temperature=set_temperature;
|
|
float temperature_change_per_loop=100; //will be calculated by Handler
|
|
|
|
uint16_t fadetime=0; //0=instant. value is time in milliseconds
|
|
#define FADETIME_MIN 0
|
|
#define FADETIME_MAX 60000
|
|
|
|
long last_updatetime=0;
|
|
#define UPDATETIME 10 //after how many ms pwm values will be updated
|
|
|
|
//Button stuff
|
|
#define BUTTONUPDATETIME 20
|
|
long last_buttonupdatetime=0;
|
|
uint8_t btnAstate=0; //for button state machine
|
|
long btnAtime=0;
|
|
uint8_t btnBstate=0; //for button state machine
|
|
long btnBtime=0;
|
|
#define BTNHOLDTIME 1000
|
|
|
|
boolean holdDirection_brightness=false;
|
|
boolean holdDirection_temperature=false;
|
|
|
|
#define HOLDBRIGHTNESSCHANGE_PER_LOOP 0.01 //depends on BUTTONUPDATETIME. BUTTONUPDATETIME/1000/HOLDBRIGHTNESSCHANGE_PER_LOOP=seconds to change a full cycle(0 to 1)
|
|
#define HOLDTEMPERATURECHANGE_PER_LOOP 10.0 // (TEMPERATURE_MAX-TEMPERATURE_MIN)*BUTTONUPDATETIME/1000/HOLDBRIGHTNESSCHANGE_PER_LOOP=seconds to change a full cycle (min to max)
|
|
|
|
boolean flag_updatePWM=false; //if manually set brightness or temperature, set this flag
|
|
|
|
//Debug
|
|
long last_debugupdatetime=0;
|
|
#define DEBUGUPDATETIME 500
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
Serial.println("Hello");
|
|
pinMode(LED_WW, OUTPUT);
|
|
pinMode(LED_CW, OUTPUT);
|
|
digitalWrite(LED_CW, HIGH); //high = off
|
|
digitalWrite(LED_WW, HIGH); //high = off
|
|
|
|
pinMode(BTN_A, INPUT);
|
|
pinMode(BTN_B, INPUT);
|
|
|
|
Homie_setFirmware(FW_NAME, FW_VERSION);
|
|
Homie_setBrand(FW_NAME);
|
|
Homie.setLoopFunction(loopHandler);
|
|
|
|
lightNode.advertise("brightness").settable(brightnessHandler);
|
|
lightNode.advertise("temperature").settable(temperatureHandler);
|
|
lightNode.advertise("fadetime").settable(fadetimeHandler);
|
|
lightNode.advertise("sleep").settable(sleepHandler);
|
|
|
|
|
|
Homie.setup();
|
|
}
|
|
|
|
void loop() {
|
|
Homie.loop();
|
|
}
|
|
|
|
void loopHandler() {
|
|
long loopmillis=millis();
|
|
|
|
|
|
|
|
if (loopmillis >= last_buttonupdatetime+BUTTONUPDATETIME ) {
|
|
last_buttonupdatetime = loopmillis;
|
|
|
|
|
|
// #### Button A ####
|
|
boolean flag_btnApress=false; //short press on release
|
|
boolean flag_btnAholdstart=false; //long press on start
|
|
boolean flag_btnAhold=false; //long press after long press time
|
|
boolean flag_btnAholdrelease=false; //long press on release
|
|
|
|
if (digitalRead(BTN_A)) { //Button State Machine
|
|
switch (btnAstate) {
|
|
case 0: //was not pressed
|
|
btnAstate=1;
|
|
btnAtime=loopmillis; //start timer
|
|
break;
|
|
case 1: //was pressed last time checked
|
|
if (loopmillis>btnAtime+BTNHOLDTIME) {
|
|
btnAstate=2;
|
|
flag_btnAholdstart=true;
|
|
}
|
|
break;
|
|
case 2: //button hold time reached
|
|
flag_btnAhold=true;
|
|
break;
|
|
}
|
|
}else {
|
|
if (btnAstate==1) { //short press
|
|
btnAstate=0; //reset state
|
|
flag_btnApress=true;
|
|
}else if(btnAstate==2) { //long press released
|
|
flag_btnAholdrelease=true;
|
|
btnAstate=0; //reset state
|
|
}
|
|
}
|
|
// #### END Button A Check ####
|
|
|
|
// #### Button B ####
|
|
boolean flag_btnBpress=false; //short press on release
|
|
boolean flag_btnBholdstart=false; //long press on start
|
|
boolean flag_btnBhold=false; //long press after long press time
|
|
boolean flag_btnBholdrelease=false; //long press on release
|
|
|
|
if (digitalRead(BTN_B)) { //Button State Machine
|
|
switch (btnBstate) {
|
|
case 0: //was not pressed
|
|
btnBstate=1;
|
|
btnBtime=loopmillis; //start timer
|
|
break;
|
|
case 1: //was pressed last time checked
|
|
if (loopmillis>btnBtime+BTNHOLDTIME) {
|
|
btnBstate=2;
|
|
flag_btnBholdstart=true;
|
|
}
|
|
break;
|
|
case 2: //button hold time reached
|
|
flag_btnBhold=true;
|
|
break;
|
|
}
|
|
}else {
|
|
if (btnBstate==1) { //short press
|
|
btnBstate=0; //reset state
|
|
flag_btnBpress=true;
|
|
}else if(btnBstate==2) { //long press released
|
|
flag_btnBholdrelease=true;
|
|
btnBstate=0; //reset state
|
|
}
|
|
}
|
|
// #### END Button B Check ####
|
|
|
|
|
|
//Button handling
|
|
if (flag_btnApress || flag_btnBpress){ //short press either button
|
|
sleep = !sleep; //switch on/off
|
|
flag_updatePWM=true; //update pwm values
|
|
}
|
|
if (sleep && flag_btnAholdstart ) { //in sleep mode and brightness button held down
|
|
sleep=false; //enabled light
|
|
set_brightness=0; //reset brightness
|
|
brightness=set_brightness; //immediately
|
|
}
|
|
|
|
if (!sleep) { //only change values if not in sleep mode
|
|
// Button A Longpress Handling
|
|
if (flag_btnAholdstart) {
|
|
/* //Change only hold direction at extremes
|
|
if (set_brightness>=BRIGHTNESS_MAX) { //if hold started with brightness at one extreme
|
|
holdDirection_brightness=false; //direction decrease
|
|
}
|
|
if (set_brightness<=BRIGHTNESS_MIN) { //if hold started with brightness at one extreme
|
|
holdDirection_brightness=true; //direction increase
|
|
}
|
|
*/
|
|
holdDirection_brightness=!holdDirection_brightness; //change direction everytime
|
|
|
|
}
|
|
if (flag_btnAhold) { //brightness
|
|
if (holdDirection_brightness) {
|
|
set_brightness += HOLDBRIGHTNESSCHANGE_PER_LOOP;
|
|
}else{
|
|
set_brightness -= HOLDBRIGHTNESSCHANGE_PER_LOOP;
|
|
}
|
|
set_brightness = constrain(set_brightness, BRIGHTNESS_MIN, BRIGHTNESS_MAX);
|
|
|
|
brightness=set_brightness; //change immediately
|
|
flag_updatePWM=true; //update pwm values
|
|
}
|
|
if (flag_btnAholdrelease) {
|
|
|
|
}
|
|
|
|
// Button B Longpress Handling
|
|
if (flag_btnBholdstart) {
|
|
/* //Change only hold direction at extremes
|
|
if (set_temperature>=TEMPERATURE_MAX) { //if hold started with brightness at one extreme
|
|
holdDirection_temperature=false; //direction decrease
|
|
}
|
|
if (set_temperature<=TEMPERATURE_MIN) { //if hold started with brightness at one extreme
|
|
holdDirection_temperature=true; //direction increase
|
|
}
|
|
*/
|
|
holdDirection_temperature=!holdDirection_temperature; //change direction everytime
|
|
}
|
|
if (flag_btnBhold) { //brightness
|
|
if (holdDirection_temperature) {
|
|
set_temperature += HOLDTEMPERATURECHANGE_PER_LOOP;
|
|
}else{
|
|
set_temperature -= HOLDTEMPERATURECHANGE_PER_LOOP;
|
|
}
|
|
set_temperature = constrain(set_temperature, TEMPERATURE_MIN, TEMPERATURE_MAX);
|
|
|
|
temperature=set_temperature; //change immediately
|
|
flag_updatePWM=true; //update pwm values
|
|
}
|
|
if (flag_btnBholdrelease) {
|
|
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
if (loopmillis >= last_updatetime+UPDATETIME ) {
|
|
last_updatetime = loopmillis;
|
|
|
|
|
|
float old_brightness = brightness; //store last brightness
|
|
if ( (brightness_change_per_loop<0 && brightness>set_brightness) || (brightness_change_per_loop>0 && brightness<set_brightness)) { //if brightness not reached
|
|
brightness += brightness_change_per_loop;
|
|
if ( ( old_brightness <= set_brightness && set_brightness <= brightness ) || ( old_brightness >= set_brightness && set_brightness >= brightness ) ) { //overshot set value
|
|
brightness = set_brightness;
|
|
}
|
|
flag_updatePWM=true; //force update
|
|
}
|
|
|
|
float old_temperature = temperature; //store last temperature
|
|
if ( (temperature_change_per_loop<0 && temperature>set_temperature) || (temperature_change_per_loop>0 && temperature<set_temperature)) { //if temperature not reached
|
|
temperature += temperature_change_per_loop;
|
|
if ( ( old_temperature <= set_temperature && set_temperature <= temperature ) || ( old_temperature >= set_temperature && set_temperature >= temperature ) ) { //overshot set value
|
|
temperature = set_temperature;
|
|
}
|
|
flag_updatePWM=true; //force update
|
|
}
|
|
|
|
//calculate and update pwm
|
|
if (brightness != set_brightness || temperature != set_temperature || flag_updatePWM) { //if target not reached
|
|
flag_updatePWM=false; // reset flag
|
|
//calculate pwm values
|
|
uint16_t pwmCW;
|
|
uint16_t pwmWW;
|
|
float temp=mapFloat(temperature, TEMPERATURE_MIN, TEMPERATURE_MAX, 0.0,1.0); //0=warmwhite, 1=coldwhite
|
|
pwmCW=brightness*PWM_MAX*temp;
|
|
pwmWW=brightness*PWM_MAX*(1-temp);
|
|
|
|
if (pwmCW>PWM_MAX) { pwmCW=PWM_MAX; } //limit
|
|
if (pwmWW>PWM_MAX) { pwmWW=PWM_MAX; } //limit
|
|
|
|
if (!sleep) {
|
|
analogWrite(LED_WW, PWM_MAX-pwmWW); //full pwm is led off
|
|
analogWrite(LED_CW, PWM_MAX-pwmCW); //full pwm is led off
|
|
}else{
|
|
analogWrite(LED_WW, PWM_MAX); //light off
|
|
analogWrite(LED_CW, PWM_MAX); //light off
|
|
}
|
|
}
|
|
}
|
|
|
|
if (loopmillis >= last_debugupdatetime+DEBUGUPDATETIME ) {
|
|
last_debugupdatetime = loopmillis;
|
|
|
|
if (sleep) { Serial.print("Sleep. "); }
|
|
Serial.print("bright=");
|
|
Serial.print(brightness);
|
|
Serial.print(" set=");
|
|
Serial.print(set_brightness);
|
|
Serial.print("| temp=");
|
|
Serial.print(temperature);
|
|
Serial.print(" set=");
|
|
Serial.print(set_temperature);
|
|
Serial.print(" change=");
|
|
Serial.println(brightness_change_per_loop);
|
|
|
|
|
|
|
|
/*
|
|
uint16_t pwmCW;
|
|
uint16_t pwmWW;
|
|
float temp=mapFloat(temperature, TEMPERATURE_MIN, TEMPERATURE_MAX, 0.0,1.0); //0=warmwhite, 1=coldwhite
|
|
pwmCW=brightness*PWM_MAX*temp;
|
|
pwmWW=brightness*PWM_MAX*(1-temp);
|
|
|
|
if (pwmCW>PWM_MAX) { pwmCW=PWM_MAX; } //limit
|
|
if (pwmWW>PWM_MAX) { pwmWW=PWM_MAX; } //limit
|
|
|
|
if (!sleep) {
|
|
Serial.print(PWM_MAX-pwmWW);
|
|
Serial.print(", ");
|
|
Serial.println(PWM_MAX-pwmCW);
|
|
}else{
|
|
Serial.print(0);
|
|
Serial.print(", ");
|
|
Serial.println(0);
|
|
}
|
|
*/
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
bool brightnessHandler(const HomieRange& range, const String& value) {
|
|
if (range.isRange) {
|
|
return false; //if range is given but index is not in allowed range
|
|
}
|
|
Homie.getLogger() << "brightness " << ": " << value << endl;
|
|
lightNode.setProperty("brightness").send(value);
|
|
if (value.toFloat() >= BRIGHTNESS_MIN && value.toFloat() <= BRIGHTNESS_MAX) {
|
|
set_brightness=value.toFloat();
|
|
}else {
|
|
Homie.getLogger() << "Value outside range" << endl;
|
|
return false;
|
|
}
|
|
|
|
float _difference=set_brightness-brightness;
|
|
if (fadetime>0) {
|
|
brightness_change_per_loop = _difference/fadetime*UPDATETIME;
|
|
} else { //special case for instant change
|
|
brightness_change_per_loop = _difference;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
bool temperatureHandler(const HomieRange& range, const String& value) {
|
|
if (range.isRange) {
|
|
return false; //if range is given but index is not in allowed range
|
|
}
|
|
Homie.getLogger() << "temperature " << ": " << value << endl;
|
|
lightNode.setProperty("temperature").send(value);
|
|
|
|
if (value.toFloat() >= TEMPERATURE_MIN && value.toFloat() <= TEMPERATURE_MAX) {
|
|
set_temperature=value.toFloat();
|
|
}else {
|
|
Homie.getLogger() << "Value outside range" << endl;
|
|
return false;
|
|
}
|
|
|
|
float _difference=set_temperature-temperature;
|
|
if (fadetime>0) {
|
|
temperature_change_per_loop = _difference/fadetime*UPDATETIME;
|
|
} else { //special case for instant change
|
|
temperature_change_per_loop = _difference;
|
|
}
|
|
|
|
|
|
return true;
|
|
}
|
|
|
|
bool fadetimeHandler(const HomieRange& range, const String& value) { //fadetime for temperature and brightness in milliseconds
|
|
if (range.isRange) {
|
|
return false; //if range is given but index is not in allowed range
|
|
}
|
|
Homie.getLogger() << "fadetime " << ": " << value << endl;
|
|
lightNode.setProperty("fadetime").send(value);
|
|
|
|
if (value.toInt() >= FADETIME_MIN && value.toInt() <= FADETIME_MAX) {
|
|
fadetime=value.toInt();
|
|
}else {
|
|
Homie.getLogger() << "Value outside range" << endl;
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
bool sleepHandler(const HomieRange& range, const String& value) { //change on off
|
|
if (range.isRange) {
|
|
return false; //if range is given but index is not in allowed range
|
|
}
|
|
Homie.getLogger() << "sleep " << ": " << value << endl;
|
|
lightNode.setProperty("sleep").send(value);
|
|
|
|
if (value.toInt() == 0) {
|
|
sleep=true;
|
|
} else if(value.toInt() == 1) {
|
|
sleep=false;
|
|
} else {
|
|
Homie.getLogger() << "Value outside range" << endl;
|
|
return false;
|
|
}
|
|
|
|
flag_updatePWM=true; //force update
|
|
|
|
return true;
|
|
}
|
|
|
|
float mapFloat(float x, float in_min, float in_max, float out_min, float out_max) {
|
|
return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
|
|
}
|