try to fix sensoresp7. fix vl53l1x i2c speed

platformio.ini

@@ -297,6 +297,7 @@ lib_deps =
     ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
     Homie@3.0.0
     claws/BH1750@1.1.4
+    SPI
 
 #Badezimmer
 [env:sensoresp7]
@@ -309,28 +310,21 @@ monitor_port = COM3
 monitor_speed = 115200
 
 build_flags =
-    
     -D SENSOR_HCSR501
     -D SENSOR_HCSR501_PIN=D6
 
     -D SENSOR_VL53L1X
     -D SENSOR_VL53L1X_minchange=200
     -D SENSOR_VL53L1X_senddelaymax=1000*30
-    -D SENSOR_VL53L1X_readdelay=500
-
-    -D SENSOR_HTU21D
-    -D dataHTU21D_temperature_minchange=0.2
-    -D dataHTU21D_temperature_senddelaymax=1000*60*30
-    -D dataHTU21D_humidity_minchange=1.0
-    -D dataHTU21D_humidity_senddelaymax=1000*60*30
+    -D SENSOR_VL53L1X_readdelay=250
+    
 
 lib_deps =
     Bounce2
-    SPI
     ArduinoJson@6.16.1
     marvinroger/Homie @ ^3.0.1
     pololu/VL53L1X @ ^1.3.0
-    adafruit/Adafruit HTU21DF Library @ ^1.0.5
+    
 
 #3D Printer
 [env:sensoresp3dprinter]
@@ -354,37 +348,5 @@ lib_deps =
     adafruit/Adafruit HTU21DF Library @ ^1.0.5
     ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
     Homie@3.0.0
+    SPI
 
-
-
-
-
-#Test
-[env:sensoresptest]
-platform = espressif8266 @ 2.5.0
-board = d1_mini
-framework = arduino
-
-monitor_port = /dev/ttyUSB0
-monitor_speed = 115200
-
-build_flags =
-
-    -D SENSOR_HTU21D
-    -D dataHTU21D_temperature_minchange=0.2
-    -D dataHTU21D_temperature_senddelaymax=1000*60*30
-    -D dataHTU21D_humidity_minchange=1.0
-    -D dataHTU21D_humidity_senddelaymax=1000*60*30
-
-
-    -D SENSOR_TCS34725
-    -D SENSOR_TCS34725_LUX_minchange=500
-    -D SENSOR_TCS34725_LUX_senddelaymax=1000*60*1
-    -D SENSOR_TCS34725_COLORTEMP_minchange=100
-    -D SENSOR_TCS34725_LUXFACTOR=0.3 #measured with luxmeter. with half tennis ball was 1.7ev less. 1/2^1.7=0,3078
-
-lib_deps = 
-    ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
-    Homie@3.0.0
-    adafruit/Adafruit HTU21DF Library @ ^1.0.5
-    https://github.com/adafruit/Adafruit_TCS34725#1.3.5

src/sensor_vl53l1x.cpp

@@ -10,6 +10,8 @@ Sensor_VL53L1X::Sensor_VL53L1X()
 void Sensor_VL53L1X::init() //Things to be done during setup()
 {    
   Serial.println("initializing vl53l1x");
+  Wire.begin();
+  Wire.setClock(400000); // use 400 kHz I2C
   vl53l1x->setTimeout(500);
   if (!vl53l1x->init()) {
     Serial.println("No vl53l1x found!");