735 lines
22 KiB
C++
735 lines
22 KiB
C++
/*
|
|
Copyright (C) 2011 James Coliz, Jr. <maniacbug@ymail.com>
|
|
|
|
This program is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU General Public License
|
|
version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef __RF24_H__
|
|
#define __RF24_H__
|
|
|
|
#include <stddef.h>
|
|
#include <avr/pgmspace.h>
|
|
|
|
typedef enum { RF24_PA_MIN = 0,RF24_PA_LOW, RF24_PA_HIGH, RF24_PA_MAX, RF24_PA_ERROR } rf24_pa_dbm_e ;
|
|
typedef enum { RF24_1MBPS = 0, RF24_2MBPS, RF24_250KBPS } rf24_datarate_e;
|
|
typedef enum { RF24_CRC_DISABLED = 0, RF24_CRC_8, RF24_CRC_16 } rf24_crclength_e;
|
|
|
|
/**
|
|
* Driver for nRF24L01(+) 2.4GHz Wireless Transceiver
|
|
*/
|
|
|
|
class RF24
|
|
{
|
|
private:
|
|
uint8_t ce_pin; /**< "Chip Enable" pin, activates the RX or TX role */
|
|
uint8_t csn_pin; /**< SPI Chip select */
|
|
bool wide_band; /* 2Mbs data rate in use? */
|
|
bool p_variant; /* False for RF24L01 and true for RF24L01P */
|
|
uint8_t payload_size; /**< Fixed size of payloads */
|
|
bool ack_payload_available; /**< Whether there is an ack payload waiting */
|
|
bool dynamic_payloads_enabled; /**< Whether dynamic payloads are enabled. */
|
|
uint8_t ack_payload_length; /**< Dynamic size of pending ack payload. */
|
|
uint64_t pipe0_reading_address; /**< Last address set on pipe 0 for reading. */
|
|
|
|
protected:
|
|
/**
|
|
* @name Low-level internal interface.
|
|
*
|
|
* Protected methods that address the chip directly. Regular users cannot
|
|
* ever call these. They are documented for completeness and for developers who
|
|
* may want to extend this class.
|
|
*/
|
|
/**@{*/
|
|
|
|
/**
|
|
* Set chip select pin
|
|
*
|
|
* Running SPI bus at PI_CLOCK_DIV2 so we don't waste time transferring data
|
|
* and best of all, we make use of the radio's FIFO buffers. A lower speed
|
|
* means we're less likely to effectively leverage our FIFOs and pay a higher
|
|
* AVR runtime cost as toll.
|
|
*
|
|
* @param mode HIGH to take this unit off the SPI bus, LOW to put it on
|
|
*/
|
|
void csn(int mode);
|
|
|
|
/**
|
|
* Set chip enable
|
|
*
|
|
* @param level HIGH to actively begin transmission or LOW to put in standby. Please see data sheet
|
|
* for a much more detailed description of this pin.
|
|
*/
|
|
void ce(int level);
|
|
|
|
/**
|
|
* Read a chunk of data in from a register
|
|
*
|
|
* @param reg Which register. Use constants from nRF24L01.h
|
|
* @param buf Where to put the data
|
|
* @param len How many bytes of data to transfer
|
|
* @return Current value of status register
|
|
*/
|
|
uint8_t read_register(uint8_t reg, uint8_t* buf, uint8_t len);
|
|
|
|
/**
|
|
* Read single byte from a register
|
|
*
|
|
* @param reg Which register. Use constants from nRF24L01.h
|
|
* @return Current value of register @p reg
|
|
*/
|
|
uint8_t read_register(uint8_t reg);
|
|
|
|
/**
|
|
* Write a chunk of data to a register
|
|
*
|
|
* @param reg Which register. Use constants from nRF24L01.h
|
|
* @param buf Where to get the data
|
|
* @param len How many bytes of data to transfer
|
|
* @return Current value of status register
|
|
*/
|
|
uint8_t write_register(uint8_t reg, const uint8_t* buf, uint8_t len);
|
|
|
|
/**
|
|
* Write a single byte to a register
|
|
*
|
|
* @param reg Which register. Use constants from nRF24L01.h
|
|
* @param value The new value to write
|
|
* @return Current value of status register
|
|
*/
|
|
uint8_t write_register(uint8_t reg, uint8_t value);
|
|
|
|
/**
|
|
* Write the transmit payload
|
|
*
|
|
* The size of data written is the fixed payload size, see getPayloadSize()
|
|
*
|
|
* @param buf Where to get the data
|
|
* @param len Number of bytes to be sent
|
|
* @return Current value of status register
|
|
*/
|
|
uint8_t write_payload(const void* buf, uint8_t len);
|
|
|
|
/**
|
|
* Read the receive payload
|
|
*
|
|
* The size of data read is the fixed payload size, see getPayloadSize()
|
|
*
|
|
* @param buf Where to put the data
|
|
* @param len Maximum number of bytes to read
|
|
* @return Current value of status register
|
|
*/
|
|
uint8_t read_payload(void* buf, uint8_t len);
|
|
|
|
/**
|
|
* Empty the receive buffer
|
|
*
|
|
* @return Current value of status register
|
|
*/
|
|
uint8_t flush_rx(void);
|
|
|
|
/**
|
|
* Empty the transmit buffer
|
|
*
|
|
* @return Current value of status register
|
|
*/
|
|
uint8_t flush_tx(void);
|
|
|
|
/**
|
|
* Retrieve the current status of the chip
|
|
*
|
|
* @return Current value of status register
|
|
*/
|
|
uint8_t get_status(void);
|
|
|
|
/**
|
|
* Decode and print the given status to stdout
|
|
*
|
|
* @param status Status value to print
|
|
*
|
|
* @warning Does nothing if stdout is not defined. See fdevopen in stdio.h
|
|
*/
|
|
void print_status(uint8_t status);
|
|
|
|
/**
|
|
* Decode and print the given 'observe_tx' value to stdout
|
|
*
|
|
* @param value The observe_tx value to print
|
|
*
|
|
* @warning Does nothing if stdout is not defined. See fdevopen in stdio.h
|
|
*/
|
|
void print_observe_tx(uint8_t value);
|
|
|
|
/**
|
|
* Print the name and value of an 8-bit register to stdout
|
|
*
|
|
* Optionally it can print some quantity of successive
|
|
* registers on the same line. This is useful for printing a group
|
|
* of related registers on one line.
|
|
*
|
|
* @param name Name of the register
|
|
* @param reg Which register. Use constants from nRF24L01.h
|
|
* @param qty How many successive registers to print
|
|
*/
|
|
void print_byte_register(prog_char* name, uint8_t reg, uint8_t qty = 1);
|
|
|
|
/**
|
|
* Print the name and value of a 40-bit address register to stdout
|
|
*
|
|
* Optionally it can print some quantity of successive
|
|
* registers on the same line. This is useful for printing a group
|
|
* of related registers on one line.
|
|
*
|
|
* @param name Name of the register
|
|
* @param reg Which register. Use constants from nRF24L01.h
|
|
* @param qty How many successive registers to print
|
|
*/
|
|
void print_address_register(prog_char* name, uint8_t reg, uint8_t qty = 1);
|
|
|
|
/**
|
|
* Turn on or off the special features of the chip
|
|
*
|
|
* The chip has certain 'features' which are only available when the 'features'
|
|
* are enabled. See the datasheet for details.
|
|
*/
|
|
void toggle_features(void);
|
|
/**@}*/
|
|
|
|
public:
|
|
/**
|
|
* @name Primary public interface
|
|
*
|
|
* These are the main methods you need to operate the chip
|
|
*/
|
|
/**@{*/
|
|
|
|
/**
|
|
* Constructor
|
|
*
|
|
* Creates a new instance of this driver. Before using, you create an instance
|
|
* and send in the unique pins that this chip is connected to.
|
|
*
|
|
* @param _cepin The pin attached to Chip Enable on the RF module
|
|
* @param _cspin The pin attached to Chip Select
|
|
*/
|
|
RF24(uint8_t _cepin, uint8_t _cspin);
|
|
|
|
/**
|
|
* Begin operation of the chip
|
|
*
|
|
* Call this in setup(), before calling any other methods.
|
|
*/
|
|
void begin(void);
|
|
|
|
/**
|
|
* Start listening on the pipes opened for reading.
|
|
*
|
|
* Be sure to call openReadingPipe() first. Do not call write() while
|
|
* in this mode, without first calling stopListening(). Call
|
|
* isAvailable() to check for incoming traffic, and read() to get it.
|
|
*/
|
|
void startListening(void);
|
|
|
|
/**
|
|
* Stop listening for incoming messages
|
|
*
|
|
* Do this before calling write().
|
|
*/
|
|
void stopListening(void);
|
|
|
|
/**
|
|
* Write to the open writing pipe
|
|
*
|
|
* Be sure to call openWritingPipe() first to set the destination
|
|
* of where to write to.
|
|
*
|
|
* This blocks until the message is successfully acknowledged by
|
|
* the receiver or the timeout/retransmit maxima are reached. In
|
|
* the current configuration, the max delay here is 60ms.
|
|
*
|
|
* The maximum size of data written is the fixed payload size, see
|
|
* getPayloadSize(). However, you can write less, and the remainder
|
|
* will just be filled with zeroes.
|
|
*
|
|
* @param buf Pointer to the data to be sent
|
|
* @param len Number of bytes to be sent
|
|
* @return True if the payload was delivered successfully false if not
|
|
*/
|
|
bool write( const void* buf, uint8_t len );
|
|
|
|
/**
|
|
* Test whether there are bytes available to be read
|
|
*
|
|
* @return True if there is a payload available, false if none is
|
|
*/
|
|
bool available(void);
|
|
|
|
/**
|
|
* Read the payload
|
|
*
|
|
* Return the last payload received
|
|
*
|
|
* The size of data read is the fixed payload size, see getPayloadSize()
|
|
*
|
|
* @note I specifically chose 'void*' as a data type to make it easier
|
|
* for beginners to use. No casting needed.
|
|
*
|
|
* @param buf Pointer to a buffer where the data should be written
|
|
* @param len Maximum number of bytes to read into the buffer
|
|
* @return True if the payload was delivered successfully false if not
|
|
*/
|
|
bool read( void* buf, uint8_t len );
|
|
|
|
/**
|
|
* Open a pipe for writing
|
|
*
|
|
* Only one pipe can be open at once, but you can change the pipe
|
|
* you'll listen to. Do not call this while actively listening.
|
|
* Remember to stopListening() first.
|
|
*
|
|
* Addresses are 40-bit hex values, e.g.:
|
|
*
|
|
* @code
|
|
* openWritingPipe(0xF0F0F0F0F0);
|
|
* @endcode
|
|
*
|
|
* @param address The 40-bit address of the pipe to open. This can be
|
|
* any value whatsoever, as long as you are the only one writing to it
|
|
* and only one other radio is listening to it. Coordinate these pipe
|
|
* addresses amongst nodes on the network.
|
|
*/
|
|
void openWritingPipe(uint64_t address);
|
|
|
|
/**
|
|
* Open a pipe for reading
|
|
*
|
|
* Up to 6 pipes can be open for reading at once. Open all the
|
|
* reading pipes, and then call startListening().
|
|
*
|
|
* @see openWritingPipe
|
|
*
|
|
* @warning Pipes 1-5 should share the first 32 bits.
|
|
* Only the least significant byte should be unique, e.g.
|
|
* @code
|
|
* openReadingPipe(1,0xF0F0F0F0AA);
|
|
* openReadingPipe(2,0xF0F0F0F066);
|
|
* @endcode
|
|
*
|
|
* @warning Pipe 0 is also used by the writing pipe. So if you open
|
|
* pipe 0 for reading, and then startListening(), it will overwrite the
|
|
* writing pipe. Ergo, do an openWritingPipe() again before write().
|
|
*
|
|
* @todo Enforce the restriction that pipes 1-5 must share the top 32 bits
|
|
*
|
|
* @param number Which pipe# to open, 0-5.
|
|
* @param address The 40-bit address of the pipe to open.
|
|
*/
|
|
void openReadingPipe(uint8_t number, uint64_t address);
|
|
|
|
/**@}*/
|
|
/**
|
|
* @name Optional Configurators
|
|
*
|
|
* Methods you can use to get or set the configuration of the chip.
|
|
* None are required. Calling begin() sets up a reasonable set of
|
|
* defaults.
|
|
*/
|
|
/**@{*/
|
|
/**
|
|
* Set the number and delay of retries upon failed submit
|
|
*
|
|
* @param delay How long to wait between each retry, in multiples of 250us,
|
|
* max is 15. 0 means 250us, 15 means 4000us.
|
|
* @param count How many retries before giving up, max 15
|
|
*/
|
|
void setRetries(uint8_t delay, uint8_t count);
|
|
|
|
/**
|
|
* Set RF communication channel
|
|
*
|
|
* @param channel Which RF channel to communicate on, 0-127
|
|
*/
|
|
void setChannel(uint8_t channel);
|
|
|
|
/**
|
|
* Set Static Payload Size
|
|
*
|
|
* This implementation uses a pre-stablished fixed payload size for all
|
|
* transmissions. If this method is never called, the driver will always
|
|
* transmit the maximum payload size (32 bytes), no matter how much
|
|
* was sent to write().
|
|
*
|
|
* @todo Implement variable-sized payloads feature
|
|
*
|
|
* @param size The number of bytes in the payload
|
|
*/
|
|
void setPayloadSize(uint8_t size);
|
|
|
|
/**
|
|
* Get Static Payload Size
|
|
*
|
|
* @see setPayloadSize()
|
|
*
|
|
* @return The number of bytes in the payload
|
|
*/
|
|
uint8_t getPayloadSize(void);
|
|
|
|
/**
|
|
* Get Dynamic Payload Size
|
|
*
|
|
* For dynamic payloads, this pulls the size of the payload off
|
|
* the chip
|
|
*
|
|
* @return Payload length of last-received dynamic payload
|
|
*/
|
|
uint8_t getDynamicPayloadSize(void);
|
|
|
|
/**
|
|
* Enable custom payloads on the acknowledge packets
|
|
*
|
|
* Ack payloads are a handy way to return data back to senders without
|
|
* manually changing the radio modes on both units.
|
|
*
|
|
* @see examples/pingpair_pl/pingpair_pl.pde
|
|
*/
|
|
void enableAckPayload(void);
|
|
|
|
/**
|
|
* Enable dynamically-sized payloads
|
|
*
|
|
* This way you don't always have to send large packets just to send them
|
|
* once in a while. This enables dynamic payloads on ALL pipes.
|
|
*
|
|
* @see examples/pingpair_pl/pingpair_dyn.pde
|
|
*/
|
|
void enableDynamicPayloads(void);
|
|
|
|
/**
|
|
* Determine whether the hardware is an nRF24L01+ or not.
|
|
*
|
|
* @return true if the hardware is nRF24L01+ (or compatible) and false
|
|
* if its not.
|
|
*/
|
|
bool isPVariant(void) ;
|
|
|
|
/**
|
|
* Enable or disable auto-acknowlede packets
|
|
*
|
|
* This is enabled by default, so it's only needed if you want to turn
|
|
* it off for some reason.
|
|
*
|
|
* @param enable Whether to enable (true) or disable (false) auto-acks
|
|
*/
|
|
void setAutoAck(bool enable);
|
|
|
|
/**
|
|
* Enable or disable auto-acknowlede packets on a per pipeline basis.
|
|
*
|
|
* AA is enabled by default, so it's only needed if you want to turn
|
|
* it off/on for some reason on a per pipeline basis.
|
|
*
|
|
* @param pipe Which pipeline to modify
|
|
* @param enable Whether to enable (true) or disable (false) auto-acks
|
|
*/
|
|
void setAutoAck( uint8_t pipe, bool enable ) ;
|
|
|
|
/**
|
|
* Set Power Amplifier (PA) level to one of four levels.
|
|
* Relative mnemonics have been used to allow for future PA level
|
|
* changes. According to 6.5 of the nRF24L01+ specification sheet,
|
|
* they translate to: RF24_PA_MIN=-18dBm, RF24_PA_LOW=-12dBm,
|
|
* RF24_PA_MED=-6dBM, and RF24_PA_HIGH=0dBm.
|
|
*
|
|
* @param level Desired PA level.
|
|
*/
|
|
void setPALevel( rf24_pa_dbm_e level ) ;
|
|
|
|
/**
|
|
* Fetches the current PA level.
|
|
*
|
|
* @return Returns a value from the rf24_pa_dbm_e enum describing
|
|
* the current PA setting. Please remember, all values represented
|
|
* by the enum mnemonics are negative dBm. See setPALevel for
|
|
* return value descriptions.
|
|
*/
|
|
rf24_pa_dbm_e getPALevel( void ) ;
|
|
|
|
/**
|
|
* Set the transmission data rate
|
|
*
|
|
* @warning setting RF24_250KBPS will fail for non-plus units
|
|
*
|
|
* @param speed RF24_250KBPS for 250kbs, RF24_1MBPS for 1Mbps, or RF24_2MBPS for 2Mbps
|
|
* @return true if the change was successful
|
|
*/
|
|
bool setDataRate(rf24_datarate_e speed);
|
|
|
|
/**
|
|
* Fetches the transmission data rate
|
|
*
|
|
* @return Returns the hardware's currently configured datarate. The value
|
|
* is one of 250kbs, RF24_1MBPS for 1Mbps, or RF24_2MBPS, as defined in the
|
|
* rf24_datarate_e enum.
|
|
*/
|
|
rf24_datarate_e getDataRate( void ) ;
|
|
|
|
/**
|
|
* Set the CRC length
|
|
*
|
|
* @param length RF24_CRC_8 for 8-bit or RF24_CRC_16 for 16-bit
|
|
*/
|
|
void setCRCLength(rf24_crclength_e length);
|
|
|
|
/**
|
|
* Get the CRC length
|
|
*
|
|
* @return RF24_DISABLED if disabled or RF24_CRC_8 for 8-bit or RF24_CRC_16 for 16-bit
|
|
*/
|
|
rf24_crclength_e getCRCLength(void);
|
|
|
|
/**
|
|
* Disable CRC validation
|
|
*
|
|
*/
|
|
void disableCRC( void ) ;
|
|
|
|
/**@}*/
|
|
/**
|
|
* @name Advanced Operation
|
|
*
|
|
* Methods you can use to drive the chip in more advanced ways
|
|
*/
|
|
/**@{*/
|
|
|
|
/**
|
|
* Print a giant block of debugging information to stdout
|
|
*
|
|
* @warning Does nothing if stdout is not defined. See fdevopen in stdio.h
|
|
*/
|
|
void printDetails(void);
|
|
|
|
/**
|
|
* Enter low-power mode
|
|
*
|
|
* To return to normal power mode, either write() some data or
|
|
* startListening, or powerUp().
|
|
*/
|
|
void powerDown(void);
|
|
|
|
/**
|
|
* Leave low-power mode - making radio more responsive
|
|
*
|
|
* To return to low power mode, call powerDown().
|
|
*/
|
|
void powerUp(void) ;
|
|
|
|
/**
|
|
* Test whether there are bytes available to be read
|
|
*
|
|
* Use this version to discover on which pipe the message
|
|
* arrived.
|
|
*
|
|
* @param[out] pipe_num Which pipe has the payload available
|
|
* @return True if there is a payload available, false if none is
|
|
*/
|
|
bool available(uint8_t* pipe_num);
|
|
|
|
/**
|
|
* Non-blocking write to the open writing pipe
|
|
*
|
|
* Just like write(), but it returns immediately. To find out what happened
|
|
* to the send, catch the IRQ and then call whatHappened().
|
|
*
|
|
* @see write()
|
|
* @see whatHappened()
|
|
*
|
|
* @param buf Pointer to the data to be sent
|
|
* @param len Number of bytes to be sent
|
|
* @return True if the payload was delivered successfully false if not
|
|
*/
|
|
void startWrite( const void* buf, uint8_t len );
|
|
|
|
/**
|
|
* Write an ack payload for the specified pipe
|
|
*
|
|
* The next time a message is received on @p pipe, the data in @p buf will
|
|
* be sent back in the acknowledgement.
|
|
*
|
|
* @warning According to the data sheet, only three of these can be pending
|
|
* at any time. I have not tested this.
|
|
*
|
|
* @param pipe Which pipe# (typically 1-5) will get this response.
|
|
* @param buf Pointer to data that is sent
|
|
* @param len Length of the data to send, up to 32 bytes max. Not affected
|
|
* by the static payload set by setPayloadSize().
|
|
*/
|
|
void writeAckPayload(uint8_t pipe, const void* buf, uint8_t len);
|
|
|
|
/**
|
|
* Determine if an ack payload was received in the most recent call to
|
|
* write().
|
|
*
|
|
* Call read() to retrieve the ack payload.
|
|
*
|
|
* @warning Calling this function clears the internal flag which indicates
|
|
* a payload is available. If it returns true, you must read the packet
|
|
* out as the very next interaction with the radio, or the results are
|
|
* undefined.
|
|
*
|
|
* @return True if an ack payload is available.
|
|
*/
|
|
bool isAckPayloadAvailable(void);
|
|
|
|
/**
|
|
* Call this when you get an interrupt to find out why
|
|
*
|
|
* Tells you what caused the interrupt, and clears the state of
|
|
* interrupts.
|
|
*
|
|
* @param[out] tx_ok The send was successful (TX_DS)
|
|
* @param[out] tx_fail The send failed, too many retries (MAX_RT)
|
|
* @param[out] rx_ready There is a message waiting to be read (RX_DS)
|
|
*/
|
|
void whatHappened(bool& tx_ok,bool& tx_fail,bool& rx_ready);
|
|
|
|
/**
|
|
* Test whether there was a carrier on the line for the
|
|
* previous listening period.
|
|
*
|
|
* Useful to check for interference on the current channel.
|
|
*
|
|
* @return true if was carrier, false if not
|
|
*/
|
|
bool testCarrier(void);
|
|
|
|
/**
|
|
* Test whether a signal (carrier or otherwise) greater than
|
|
* or equal to -64dBm is present on the channel. Valid only
|
|
* on nRF24L01P (+) hardware. On nRF24L01, use testCarrier().
|
|
*
|
|
* Useful to check for interference on the current channel and
|
|
* channel hopping strategies.
|
|
*
|
|
* @return true if signal => -64dBm, false if not
|
|
*/
|
|
bool testRPD(void) ;
|
|
|
|
/**@}*/
|
|
};
|
|
|
|
/**
|
|
* @example GettingStarted.pde
|
|
*
|
|
* This is an example which corresponds to my "Getting Started" blog post
|
|
* for Getting Started with nRF24L01+ radios.
|
|
*
|
|
* It is an example of how to use the RF24 class. Write this sketch to two
|
|
* different nodes. Put one of the nodes into 'transmit' mode by connecting
|
|
* with the serial monitor and sending a 'T'. The ping node sends the current
|
|
* time to the pong node, which responds by sending the value back. The ping
|
|
* node can then see how long the whole cycle took.
|
|
*/
|
|
|
|
/**
|
|
* @example led_remote.pde
|
|
*
|
|
* This is an example of how to use the RF24 class to control a remote
|
|
* bank of LED's using buttons on a remote control.
|
|
*
|
|
* Every time the buttons change on the remote, the entire state of
|
|
* buttons is send to the led board, which displays the state.
|
|
*/
|
|
|
|
/**
|
|
* @example pingpair.pde
|
|
*
|
|
* This is an example of how to use the RF24 class. Write this sketch to two
|
|
* different nodes, connect the role_pin to ground on one. The ping node sends
|
|
* the current time to the pong node, which responds by sending the value back.
|
|
* The ping node can then see how long the whole cycle took.
|
|
*/
|
|
|
|
/**
|
|
* @example starping.pde
|
|
*
|
|
* This sketch is a more complex example of using the RF24 library for Arduino.
|
|
* Deploy this on up to six nodes. Set one as the 'pong receiver' by tying the
|
|
* role_pin low, and the others will be 'ping transmit' units. The ping units
|
|
* unit will send out the value of millis() once a second. The pong unit will
|
|
* respond back with a copy of the value. Each ping unit can get that response
|
|
* back, and determine how long the whole cycle took.
|
|
*
|
|
* This example requires a bit more complexity to determine which unit is which.
|
|
* The pong receiver is identified by having its role_pin tied to ground.
|
|
* The ping senders are further differentiated by a byte in eeprom.
|
|
*/
|
|
|
|
/**
|
|
* @example pingpair_pl.pde
|
|
*
|
|
* This is an example of how to do two-way communication without changing
|
|
* transmit/receive modes. Here, a payload is set to the transmitter within
|
|
* the Ack packet of each transmission. Note that the payload is set BEFORE
|
|
* the sender's message arrives.
|
|
*/
|
|
|
|
/**
|
|
* @example pingpair_irq.pde
|
|
*
|
|
* This is an example of how to user interrupts to interact with the radio.
|
|
* It builds on the pingpair_pl example, and uses ack payloads.
|
|
*/
|
|
|
|
/**
|
|
* @example pingpair_sleepy.pde
|
|
*
|
|
* This is an example of how to use the RF24 class to create a battery-
|
|
* efficient system. It is just like the pingpair.pde example, but the
|
|
* ping node powers down the radio and sleeps the MCU after every
|
|
* ping/pong cycle.
|
|
*/
|
|
|
|
/**
|
|
* @example scanner.pde
|
|
*
|
|
* Example to detect interference on the various channels available.
|
|
* This is a good diagnostic tool to check whether you're picking a
|
|
* good channel for your application.
|
|
*
|
|
* Inspired by cpixip.
|
|
* See http://arduino.cc/forum/index.php/topic,54795.0.html
|
|
*/
|
|
|
|
/**
|
|
* @mainpage Driver for nRF24L01(+) 2.4GHz Wireless Transceiver
|
|
*
|
|
* Design Goals: This library is designed to be...
|
|
* @li Maximally compliant with the intended operation of the chip
|
|
* @li Easy for beginners to use
|
|
* @li Consumed with a public interface that's similiar to other Arduino standard libraries
|
|
*
|
|
* NOW COMPATIBLE WITH ARDUINO 1.0 - Please use the
|
|
* <a href="https://github.com/maniacbug/RF24/tree/arduino-1.0">'arduino-1.0' branch</a>
|
|
* for use with Arduino 1.0. This will be merged into master when Arduino 1.0 is released.
|
|
*
|
|
* Please refer to:
|
|
*
|
|
* @li <a href="http://maniacbug.github.com/RF24/">Documentation Main Page</a>
|
|
* @li <a href="http://maniacbug.github.com/RF24/classRF24.html">RF24 Class Documentation</a>
|
|
* @li <a href="https://github.com/maniacbug/RF24/">Source Code</a>
|
|
* @li <a href="https://github.com/maniacbug/RF24/archives/master">Downloads Page</a>
|
|
* @li <a href="http://www.nordicsemi.com/files/Product/data_sheet/nRF24L01_Product_Specification_v2_0.pdf">Chip Datasheet</a>
|
|
*
|
|
* This chip uses the SPI bus, plus two chip control pins. Remember that pin 10 must still remain an output, or
|
|
* the SPI hardware will go into 'slave' mode.
|
|
*
|
|
* @section More More Information
|
|
*
|
|
* @subpage FAQ
|
|
*/
|
|
|
|
#endif // __RF24_H__
|
|
// vim:ai:cin:sts=2 sw=2 ft=cpp
|
|
|