Created an all-up script runner
This commit is contained in:
parent
c624815704
commit
af37c345e8
|
@ -1,10 +1,7 @@
|
|||
The sketches in this directory are intended to be checkin tests.
|
||||
No code should be pushed to github without these tests passing.
|
||||
|
||||
The way I run each test is from within the sketch dir, doing this:
|
||||
jam p4 p6 && ./runtest.py /dev/tty.usbserial-A40081RP
|
||||
|
||||
runtest.py will exit with code 0 on pass code 1 on fail
|
||||
See "runtests.sh" script inside each sketch dir. This script is fully compatible with
|
||||
git bisest.
|
||||
|
||||
Note that this requires python and py-serial
|
||||
|
||||
|
|
|
@ -138,6 +138,14 @@ void setup(void)
|
|||
// It would be a much better test if this program could accept configuration
|
||||
// from the serial port. Then it would be possible to run the same test under
|
||||
// lots of different circumstances.
|
||||
//
|
||||
// The idea is that we will print "+READY" at this point. The python script
|
||||
// will wait for it, and then send down a configuration script that we
|
||||
// execute here and then run with.
|
||||
//
|
||||
// The test controller will need to configure the receiver first, then go run
|
||||
// the test on the sender.
|
||||
//
|
||||
|
||||
//
|
||||
// Setup and configure rf radio
|
||||
|
@ -195,6 +203,14 @@ void setup(void)
|
|||
//
|
||||
|
||||
attachInterrupt(0, check_radio, FALLING);
|
||||
|
||||
//
|
||||
// Receiver node automatically "passes" the test
|
||||
//
|
||||
if ( role == role_receiver )
|
||||
{
|
||||
done = passed = true;
|
||||
}
|
||||
}
|
||||
|
||||
static uint32_t message_count = 0;
|
||||
|
@ -206,7 +222,7 @@ void loop(void)
|
|||
// Sender role. Repeatedly send the current time
|
||||
//
|
||||
|
||||
if (role == role_sender)
|
||||
if (role == role_sender && !done)
|
||||
{
|
||||
// The payload will always be the same, what will change is how much of it we send.
|
||||
static char send_payload[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZ789012";
|
||||
|
@ -236,17 +252,12 @@ void loop(void)
|
|||
//
|
||||
if ( done )
|
||||
{
|
||||
detachInterrupt(0);
|
||||
printf("\n\r+OK ");
|
||||
if ( passed )
|
||||
printf("PASS\n\r\n\r");
|
||||
else
|
||||
printf("FAIL\n\r\n\r");
|
||||
|
||||
// Wait here
|
||||
while(1) {}
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void check_radio(void)
|
||||
|
|
|
@ -0,0 +1,8 @@
|
|||
#!/bin/sh
|
||||
|
||||
# Connect p6 to receiver, p4 to sender
|
||||
|
||||
jam p4 p6 || exit 1
|
||||
./runtest.py /dev/tty.usbserial-A600eHIs || exit 1
|
||||
./runtest.py /dev/tty.usbserial-A40081RP || exit 1
|
||||
exit 0
|
Loading…
Reference in New Issue