Fixed bug in scanner display, thanks to David Bath. Also upgraded to latest Jam toolchain and moved pins over to the new GettingStarted defaults.
This commit is contained in:
maniacbug
parent
d4371639e6
commit
5726c1622a
|
|
@ -1,206 +1,210 @@
|
|||
PROJECT_NAME = $(PWD:B) ;
|
||||
PROJECT_DIR = . ;
|
||||
PROJECT_LIBS = SPI RF24 ;
|
||||
# (1) Project Information
|
||||
|
||||
OUT_DIR = ojam ;
|
||||
F_CPU = 16000000 ;
|
||||
MCU = atmega328p ;
|
||||
PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ;
|
||||
PROJECT_LIBS = SPI RF24 ;
|
||||
|
||||
UPLOAD_RATE = 57600 ;
|
||||
AVRDUDE_PROTOCOL = stk500v1 ;
|
||||
COM = 33 ;
|
||||
# (2) Board Information
|
||||
|
||||
UPLOAD_PROTOCOL ?= stk500v1 ;
|
||||
UPLOAD_SPEED ?= 57600 ;
|
||||
MCU ?= atmega328p ;
|
||||
F_CPU ?= 16000000 ;
|
||||
CORE ?= arduino ;
|
||||
VARIANT ?= standard ;
|
||||
ARDUINO_VERSION ?= 100 ;
|
||||
|
||||
# (3) USB Ports
|
||||
|
||||
PORTS = p4 p6 p9 u0 u1 u2 ;
|
||||
PORT_p6 = /dev/tty.usbserial-A600eHIs ;
|
||||
PORT_p4 = /dev/tty.usbserial-A40081RP ;
|
||||
PORT_p9 = /dev/tty.usbserial-A9007LmI ;
|
||||
PORT_u0 = /dev/ttyUSB0 ;
|
||||
PORT_u1 = /dev/ttyUSB1 ;
|
||||
PORT_u2 = /dev/ttyUSB2 ;
|
||||
|
||||
# (4) Location of AVR tools
|
||||
#
|
||||
# This configuration assumes using avr-tools that were obtained separate from the Arduino
|
||||
# distribution.
|
||||
|
||||
# Host-specific overrides for locations
|
||||
if $(OS) = MACOSX
|
||||
{
|
||||
ARDUINO_VERSION = 22 ;
|
||||
OLD_DIR = /opt/arduino-0021 ;
|
||||
AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ;
|
||||
AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ;
|
||||
ARDUINO_DIR = /opt/Arduino ;
|
||||
ARDUINO_AVR = /usr/lib/avr/include ;
|
||||
AVR_BIN = /usr/local/avrtools/bin ;
|
||||
AVR_ETC = /usr/local/avrtools/etc ;
|
||||
AVR_INCLUDE = /usr/local/avrtools/include ;
|
||||
}
|
||||
else
|
||||
{
|
||||
AVR_BIN = /usr/bin ;
|
||||
AVR_INCLUDE = /usr/lib/avr/include ;
|
||||
AVR_ETC = /etc ;
|
||||
}
|
||||
|
||||
# Where is everything?
|
||||
ARDUINO_VERSION ?= 22 ;
|
||||
AVR_TOOLS_PATH ?= /usr/bin ;
|
||||
ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ;
|
||||
ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ;
|
||||
AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ;
|
||||
ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ;
|
||||
# (5) Directories where Arduino core and libraries are located
|
||||
|
||||
ARDUINO_DIR ?= /opt/Arduino ;
|
||||
ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/$(CORE) $(ARDUINO_DIR)/hardware/arduino/variants/$(VARIANT) ;
|
||||
ARDUINO_LIB = $(ARDUINO_DIR)/libraries ;
|
||||
SKETCH_LIB = $(HOME)/Source/Arduino/libraries ;
|
||||
AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ;
|
||||
AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ;
|
||||
AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ;
|
||||
AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ;
|
||||
AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ;
|
||||
|
||||
DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ;
|
||||
CTUNING = -ffunction-sections -fdata-sections ;
|
||||
CXXTUNING = -fno-exceptions -fno-strict-aliasing ;
|
||||
CFLAGS = -Os -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ;
|
||||
CXXFLAGS = $(CFLAGS) $(CXXTUNING) ;
|
||||
LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ;
|
||||
#
|
||||
# --------------------------------------------------
|
||||
# Below this line usually never needs to be modified
|
||||
#
|
||||
|
||||
# Tool locations
|
||||
|
||||
CC = $(AVR_BIN)/avr-gcc ;
|
||||
C++ = $(AVR_BIN)/avr-g++ ;
|
||||
LINK = $(AVR_BIN)/avr-gcc ;
|
||||
OBJCOPY = $(AVR_BIN)/avr-objcopy ;
|
||||
AVRDUDE = $(AVR_BIN)/avrdude ;
|
||||
|
||||
# Flags
|
||||
|
||||
DEFINES += F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ;
|
||||
OPTIM = -Os ;
|
||||
CCFLAGS = -Wall -Wextra -mmcu=$(MCU) -ffunction-sections -fdata-sections ;
|
||||
C++FLAGS = $(CCFLAGS) -fno-exceptions -fno-strict-aliasing ;
|
||||
LINKFLAGS = $(OPTIM) -lm -Wl,--gc-sections -mmcu=$(MCU) ;
|
||||
AVRDUDEFLAGS = -V -F -D -C $(AVR_ETC)/avrdude.conf -p $(MCU) -c $(UPLOAD_PROTOCOL) -b $(UPLOAD_SPEED) ;
|
||||
|
||||
# Search everywhere for headers
|
||||
HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ;
|
||||
|
||||
HDRS = $(PWD) $(AVR_INCLUDE) $(ARDUINO_CORE) $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) ;
|
||||
|
||||
# Output locations
|
||||
|
||||
LOCATE_TARGET = $(F_CPU) ;
|
||||
LOCATE_SOURCE = $(F_CPU) ;
|
||||
|
||||
#
|
||||
# Custom rules
|
||||
#
|
||||
|
||||
rule GitVersion
|
||||
{
|
||||
Always $(<) ;
|
||||
Depends all : $(<) ;
|
||||
}
|
||||
|
||||
actions GitVersion
|
||||
{
|
||||
echo "const char program_version[] = \"\\" > $(<)
|
||||
git log -1 --pretty=format:%h >> $(<)
|
||||
echo "\";" >> $(<)
|
||||
}
|
||||
|
||||
GitVersion version.h ;
|
||||
|
||||
rule Pde
|
||||
{
|
||||
Depends $(<) : $(>) ;
|
||||
MakeLocate $(<) : $(LOCATE_SOURCE) ;
|
||||
Clean clean : $(<) ;
|
||||
}
|
||||
|
||||
if ( $(ARDUINO_VERSION) < 100 )
|
||||
{
|
||||
ARDUINO_H = WProgram.h ;
|
||||
}
|
||||
else
|
||||
{
|
||||
ARDUINO_H = Arduino.h ;
|
||||
}
|
||||
|
||||
actions Pde
|
||||
{
|
||||
echo "#include <$(ARDUINO_H)>" > $(<)
|
||||
echo "#line 1 \"$(>)\"" >> $(<)
|
||||
cat $(>) >> $(<)
|
||||
}
|
||||
|
||||
rule C++Pde
|
||||
{
|
||||
local _CPP = $(>:B).cpp ;
|
||||
Pde $(_CPP) : $(>) ;
|
||||
C++ $(<) : $(_CPP) ;
|
||||
}
|
||||
|
||||
rule UserObject
|
||||
{
|
||||
switch $(>:S)
|
||||
{
|
||||
case .ino : C++Pde $(<) : $(>) ;
|
||||
case .pde : C++Pde $(<) : $(>) ;
|
||||
}
|
||||
}
|
||||
|
||||
rule Objects
|
||||
{
|
||||
local _i ;
|
||||
|
||||
for _i in [ FGristFiles $(<) ]
|
||||
{
|
||||
local _b = $(_i:B)$(SUFOBJ) ;
|
||||
local _o = $(_b:G=$(SOURCE_GRIST:E)) ;
|
||||
Object $(_o) : $(_i) ;
|
||||
Depends obj : $(_o) ;
|
||||
}
|
||||
}
|
||||
|
||||
rule Main
|
||||
{
|
||||
MainFromObjects $(<) : $(>:B)$(SUFOBJ) ;
|
||||
Objects $(>) ;
|
||||
}
|
||||
|
||||
rule Hex
|
||||
{
|
||||
Depends $(<) : $(>) ;
|
||||
MakeLocate $(<) : $(LOCATE_TARGET) ;
|
||||
Depends hex : $(<) ;
|
||||
Clean clean : $(<) ;
|
||||
}
|
||||
|
||||
actions Hex
|
||||
{
|
||||
$(OBJCOPY) -O ihex -R .eeprom $(>) $(<)
|
||||
}
|
||||
|
||||
rule Upload
|
||||
{
|
||||
Depends $(1) : $(2) ;
|
||||
Depends $(2) : $(3) ;
|
||||
NotFile $(1) ;
|
||||
Always $(1) ;
|
||||
Always $(2) ;
|
||||
UploadAction $(2) : $(3) ;
|
||||
}
|
||||
|
||||
actions UploadAction
|
||||
{
|
||||
$(AVRDUDE) $(AVRDUDEFLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i
|
||||
}
|
||||
|
||||
#
|
||||
# Targets
|
||||
#
|
||||
|
||||
# Grab everything from the core directory
|
||||
CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ;
|
||||
|
||||
# Grab everything from libraries. To avoid this "grab everything" behaviour, you
|
||||
# can specify specific modules to pick up in PROJECT_MODULES
|
||||
LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ;
|
||||
LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp *.c ] ;
|
||||
|
||||
# In addition to explicitly-specified program modules, pick up anything from the current
|
||||
# dir.
|
||||
PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ;
|
||||
# Grab everything from the current dir
|
||||
PROJECT_MODULES += [ GLOB $(PWD) : *.c *.cpp *.pde *.ino ] ;
|
||||
|
||||
# Shortcut for the out files
|
||||
OUT = $(OUT_DIR)/$(PROJECT_NAME) ;
|
||||
# Main output executable
|
||||
MAIN = $(PWD:B).elf ;
|
||||
|
||||
# AvrDude setup
|
||||
AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ;
|
||||
Main $(MAIN) : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ;
|
||||
Hex $(MAIN:B).hex : $(MAIN) ;
|
||||
|
||||
rule GitVersion
|
||||
# Upload targets
|
||||
for _p in $(PORTS)
|
||||
{
|
||||
Always $(<) ;
|
||||
Depends all : $(<) ;
|
||||
Upload $(_p) : $(PORT_$(_p)) : $(MAIN:B).hex ;
|
||||
}
|
||||
|
||||
actions GitVersion
|
||||
{
|
||||
echo "const char program_version[] = \"\\" > $(<)
|
||||
git log -1 --pretty=format:%h >> $(<)
|
||||
echo "\";" >> $(<)
|
||||
}
|
||||
|
||||
GitVersion version.h ;
|
||||
|
||||
rule AvrCc
|
||||
{
|
||||
Depends $(<) : $(>) ;
|
||||
Depends $(<) : $(<:D) ;
|
||||
Clean clean : $(<) ;
|
||||
|
||||
CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ;
|
||||
CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ;
|
||||
}
|
||||
|
||||
actions AvrCc
|
||||
{
|
||||
$(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>)
|
||||
}
|
||||
|
||||
rule AvrC++
|
||||
{
|
||||
Depends $(<) : $(>) ;
|
||||
Depends $(<) : $(<:D) ;
|
||||
Clean clean : $(<) ;
|
||||
|
||||
CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ;
|
||||
CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ;
|
||||
}
|
||||
|
||||
actions AvrC++
|
||||
{
|
||||
$(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>)
|
||||
}
|
||||
|
||||
rule Pde
|
||||
{
|
||||
Depends $(<) : $(>) ;
|
||||
Depends $(<) : $(<:D) ;
|
||||
Clean clean : $(<) ;
|
||||
|
||||
}
|
||||
|
||||
actions Pde
|
||||
{
|
||||
echo "#include <WProgram.h>" > $(<)
|
||||
echo "#line 1 \"$(>)\"" >> $(<)
|
||||
cat $(>) >> $(<)
|
||||
}
|
||||
|
||||
rule AvrPde
|
||||
{
|
||||
local _CPP = $(OUT_DIR)/$(_I:B).cpp ;
|
||||
Pde $(_CPP) : $(>) ;
|
||||
AvrC++ $(<) : $(_CPP) ;
|
||||
}
|
||||
|
||||
rule AvrObject
|
||||
{
|
||||
switch $(>:S)
|
||||
{
|
||||
case .c : AvrCc $(<) : $(>) ;
|
||||
case .cpp : AvrC++ $(<) : $(>) ;
|
||||
case .pde : AvrPde $(<) : $(>) ;
|
||||
}
|
||||
}
|
||||
|
||||
rule AvrObjects
|
||||
{
|
||||
for _I in $(<)
|
||||
{
|
||||
AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ;
|
||||
}
|
||||
}
|
||||
|
||||
rule AvrMainFromObjects
|
||||
{
|
||||
Depends $(<) : $(>) ;
|
||||
Depends $(<) : $(<:D) ;
|
||||
MkDir $(<:D) ;
|
||||
Depends all : $(<) ;
|
||||
Clean clean : $(<) ;
|
||||
}
|
||||
|
||||
actions AvrMainFromObjects
|
||||
{
|
||||
$(AVR_LD) $(LDFLAGS) -o $(<) $(>)
|
||||
}
|
||||
|
||||
rule AvrMain
|
||||
{
|
||||
AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ;
|
||||
AvrObjects $(>) ;
|
||||
}
|
||||
|
||||
rule AvrHex
|
||||
{
|
||||
Depends $(<) : $(>) ;
|
||||
Depends $(<) : $(<:D) ;
|
||||
Depends hex : $(<) ;
|
||||
Clean clean : $(<) ;
|
||||
}
|
||||
|
||||
actions AvrHex
|
||||
{
|
||||
$(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<)
|
||||
}
|
||||
|
||||
rule AvrUpload
|
||||
{
|
||||
Depends $(1) : $(2) ;
|
||||
Depends $(2) : $(3) ;
|
||||
NotFile $(1) ;
|
||||
Always $(1) ;
|
||||
Always $(2) ;
|
||||
AvrUploadAction $(2) : $(3) ;
|
||||
}
|
||||
|
||||
actions AvrUploadAction
|
||||
{
|
||||
$(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i
|
||||
}
|
||||
|
||||
AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ;
|
||||
AvrHex $(OUT).hex : $(OUT).elf ;
|
||||
|
||||
AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ;
|
||||
AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ;
|
||||
AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ;
|
||||
|
||||
|
|
|
|||
|
|
@ -29,14 +29,14 @@
|
|||
|
||||
// Set up nRF24L01 radio on SPI bus plus pins 8 & 9
|
||||
|
||||
RF24 radio(8,9);
|
||||
RF24 radio(9,10);
|
||||
|
||||
//
|
||||
// Channel info
|
||||
//
|
||||
|
||||
const short num_channels = 128;
|
||||
short values[num_channels];
|
||||
const uint8_t num_channels = 128;
|
||||
uint8_t values[num_channels];
|
||||
|
||||
//
|
||||
// Setup
|
||||
|
|
@ -84,12 +84,12 @@ void setup(void)
|
|||
// Loop
|
||||
//
|
||||
|
||||
const short num_reps = 100;
|
||||
const int num_reps = 100;
|
||||
|
||||
void loop(void)
|
||||
{
|
||||
// Clear measurement values
|
||||
memset(values,0,num_channels);
|
||||
memset(values,0,sizeof(values));
|
||||
|
||||
// Scan all channels num_reps times
|
||||
int rep_counter = num_reps;
|
||||
|
|
|
|||
Loading…
Reference in New Issue