Purge 'boolean' type, use 'bool' instead

.gitignore

@@ -1,3 +1,4 @@
+*.bak
 *.o
 .*.swp
 *.orig

RF24.cpp

@@ -364,9 +364,9 @@ void RF24::powerDown(void)
 
 /******************************************************************/
 
-boolean RF24::write( const void* buf, uint8_t len )
+bool RF24::write( const void* buf, uint8_t len )
 {
-  boolean result = false;
+  bool result = false;
 
   // Begin the write
   startWrite(buf,len);
@@ -456,20 +456,20 @@ uint8_t RF24::getDynamicPayloadSize(void)
 
 /******************************************************************/
 
-boolean RF24::available(void)
+bool RF24::available(void)
 {
   return available(NULL);
 }
 
 /******************************************************************/
 
-boolean RF24::available(uint8_t* pipe_num)
+bool RF24::available(uint8_t* pipe_num)
 {
   uint8_t status = get_status();
 
   // Too noisy, enable if you really want lots o data!! IF_SERIAL_DEBUG(print_status(status));
 
-  boolean result = ( status & _BV(RX_DR) );
+  bool result = ( status & _BV(RX_DR) );
 
   if (result)
   {
@@ -496,7 +496,7 @@ boolean RF24::available(uint8_t* pipe_num)
 
 /******************************************************************/
 
-boolean RF24::read( void* buf, uint8_t len )
+bool RF24::read( void* buf, uint8_t len )
 {
   // Fetch the payload
   read_payload( buf, len );
@@ -648,9 +648,9 @@ void RF24::writeAckPayload(uint8_t pipe, const void* buf, uint8_t len)
 
 /******************************************************************/
 
-boolean RF24::isAckPayloadAvailable(void)
+bool RF24::isAckPayloadAvailable(void)
 {
-  boolean result = ack_payload_available;
+  bool result = ack_payload_available;
   ack_payload_available = false;
   return result;
 }
@@ -667,7 +667,7 @@ void RF24::setAutoAck(bool enable)
 
 /******************************************************************/
 
-boolean RF24::testCarrier(void)
+bool RF24::testCarrier(void)
 {
   return ( read_register(CD) & 1 );
 }

RF24.h

@@ -24,7 +24,7 @@ private:
   uint8_t ce_pin; /**< "Chip Enable" pin, activates the RX or TX role */
   uint8_t csn_pin; /**< SPI Chip select */
   uint8_t payload_size; /**< Fixed size of payloads */
-  boolean ack_payload_available; /**< Whether there is an ack payload waiting */
+  bool ack_payload_available; /**< Whether there is an ack payload waiting */
   uint8_t ack_payload_length; /**< Dynamic size of pending ack payload. Note: not used. */
   uint64_t pipe0_reading_address; /**< Last address set on pipe 0 for reading. */
 
@@ -246,14 +246,14 @@ public:
    * @param len Number of bytes to be sent
    * @return True if the payload was delivered successfully false if not
    */
-  boolean write( const void* buf, uint8_t len );
+  bool write( const void* buf, uint8_t len );
 
   /**
    * Test whether there are bytes available to be read
    *
    * @return True if there is a payload available, false if none is
    */
-  boolean available(void);
+  bool available(void);
 
   /**
    * Read the payload
@@ -269,7 +269,7 @@ public:
    * @param len Maximum number of bytes to read into the buffer
    * @return True if the payload was delivered successfully false if not
    */
-  boolean read( void* buf, uint8_t len );
+  bool read( void* buf, uint8_t len );
 
   /**
    * Open a pipe for writing
@@ -398,7 +398,7 @@ public:
    * @param[out] pipe_num Which pipe has the payload available
    * @return True if there is a payload available, false if none is
    */
-  boolean available(uint8_t* pipe_num);
+  bool available(uint8_t* pipe_num);
 
   /**
    * Non-blocking write to the open writing pipe
@@ -464,7 +464,7 @@ public:
    *
    * @return True if an ack payload is available.
    */
-  boolean isAckPayloadAvailable(void);
+  bool isAckPayloadAvailable(void);
 
   /**
    * Call this when you get an interrupt to find out why
@@ -496,7 +496,7 @@ public:
    *
    * @return true if was carrier, false if not
    */
-  boolean testCarrier(void);
+  bool testCarrier(void);
 
   /**
    * Set the transmission data rate

examples/led_remote/led_remote.pde

@@ -229,7 +229,7 @@ void loop(void)
     if ( radio.available() )
     {
       // Dump the payloads until we've gotten everything
-      boolean done = false;
+      bool done = false;
       while (!done)
       {
         // Fetch the payload, and see if this was the last one.

examples/pingpair/pingpair.pde

@@ -192,7 +192,7 @@ void loop(void)
     {
       // Dump the payloads until we've gotten everything
       unsigned long got_time;
-      boolean done = false;
+      bool done = false;
       while (!done)
       {
         // Fetch the payload, and see if this was the last one.

examples/pingpair_dyn/pingpair_dyn.pde

@@ -209,7 +209,7 @@ void loop(void)
     {
       // Dump the payloads until we've gotten everything
       uint8_t len;
-      boolean done = false;
+      bool done = false;
       while (!done)
       {
         // Fetch the payload, and see if this was the last one.

examples/pingpair_pl/pingpair_pl.pde

@@ -160,7 +160,7 @@ void loop(void)
     {
       // Dump the payloads until we've gotten everything
       static unsigned long got_time;
-      boolean done = false;
+      bool done = false;
       while (!done)
       {
         // Fetch the payload, and see if this was the last one.

examples/pingpair_sleepy/pingpair_sleepy.pde

@@ -227,7 +227,7 @@ void loop(void)
     {
       // Dump the payloads until we've gotten everything
       unsigned long got_time;
-      boolean done = false;
+      bool done = false;
       while (!done)
       {
         // Fetch the payload, and see if this was the last one.

examples/starping/starping.pde

@@ -244,7 +244,7 @@ void loop(void)
     {
       // Dump the payloads until we've gotten everything
       unsigned long got_time;
-      boolean done = false;
+      bool done = false;
       while (!done)
       {
         // Fetch the payload, and see if this was the last one.