add ds18b20 temperature sensors
This commit is contained in:
parent
880c46bc78
commit
ca7ccc023d
|
|
@ -14,3 +14,6 @@ board = esp32doit-devkit-v1
|
|||
framework = arduino
|
||||
|
||||
monitor_speed = 115200
|
||||
|
||||
lib_deps =
|
||||
https://github.com/milesburton/Arduino-Temperature-Control-Library/
|
||||
215
src/main.cpp
215
src/main.cpp
|
|
@ -1,5 +1,7 @@
|
|||
#include <Arduino.h>
|
||||
|
||||
|
||||
// ######## EC
|
||||
#define EC_PIN_ADC 4
|
||||
#define EC_PIN_FREQ 5
|
||||
#define EC_PWM_CH 0
|
||||
|
|
@ -9,14 +11,61 @@
|
|||
#define EC_ARRAY_SIZE 1024
|
||||
uint16_t ec_array[EC_ARRAY_SIZE];
|
||||
uint16_t ec_array_pos=0;
|
||||
unsigned long ec_last_read=0;
|
||||
unsigned long last_read_ec=0;
|
||||
#define EC_READ_INTERVAL 1
|
||||
|
||||
// ######## Temperature
|
||||
#include <OneWire.h>
|
||||
#include <DallasTemperature.h>
|
||||
|
||||
//first address: 28FF6C1C7216058B
|
||||
//second address:
|
||||
|
||||
#define ONE_WIRE_BUS 18 //GPIO pin
|
||||
#define TEMPERATURE_PRECISION 12 //max is 12
|
||||
#define READINTERVAL_DS18B20 1000 //ms
|
||||
|
||||
// Setup a oneWire instance to communicate with any OneWire devices (not just Maxim/Dallas temperature ICs)
|
||||
OneWire oneWire(ONE_WIRE_BUS);
|
||||
|
||||
// Pass our oneWire reference to Dallas Temperature.
|
||||
DallasTemperature sensors(&oneWire);
|
||||
|
||||
|
||||
#define TEMPMEAN_SIZE 16
|
||||
uint16_t tempCmean_pos=0;
|
||||
// arrays to hold device addresses
|
||||
DeviceAddress thermometerReservoir={0x28,0xFF,0x30,0xBA,0x85,0x16,0x03,0xB5};
|
||||
float tempC_reservoir;
|
||||
float tempCmean_reservoir[TEMPMEAN_SIZE];
|
||||
|
||||
DeviceAddress thermometerAir={0x28,0xFF,0x6C,0x1C,0x72,0x16,0x05,0x8B};
|
||||
float tempC_air;
|
||||
float tempCmean_air[TEMPMEAN_SIZE];
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
unsigned long last_print=0;
|
||||
|
||||
float getMean(uint16_t* parray);
|
||||
uint16_t getMin(uint16_t *parray);
|
||||
uint16_t getMax(uint16_t *parray);
|
||||
|
||||
|
||||
float getMean(uint16_t *parray,uint16_t psize);
|
||||
float getMeanf(float *parray,uint16_t psize);
|
||||
uint16_t getMin(uint16_t *parray, uint16_t psize);
|
||||
uint16_t getMax(uint16_t *parray, uint16_t psize);
|
||||
bool isTempArrayOK(uint16_t *parray,uint16_t psize, uint16_t pcheck);
|
||||
bool isTempArrayOKf(float *parray,uint16_t psize, float pcheck);
|
||||
|
||||
|
||||
void printAddress(DeviceAddress deviceAddress);
|
||||
void printTemperature(DeviceAddress deviceAddress);
|
||||
void printResolution(DeviceAddress deviceAddress);
|
||||
void printData(DeviceAddress deviceAddress);
|
||||
|
||||
|
||||
|
||||
|
||||
void setup() {
|
||||
Serial.begin(115200);
|
||||
|
|
@ -25,6 +74,51 @@ void setup() {
|
|||
ledcSetup(EC_PWM_CH, EC_FREQUENCY, EC_RESOLUTION);
|
||||
ledcAttachPin(EC_PIN_FREQ, EC_PWM_CH);
|
||||
ledcWrite(EC_PWM_CH, 127);
|
||||
|
||||
//initialize mean array
|
||||
for (uint16_t i=0;i<TEMPMEAN_SIZE;i++) {
|
||||
tempCmean_reservoir[i]=-127;
|
||||
tempCmean_air[i]=-127;
|
||||
}
|
||||
|
||||
sensors.begin();
|
||||
delay(1000);
|
||||
|
||||
Serial.print("Locating devices...");
|
||||
Serial.print("Found ");
|
||||
Serial.print(sensors.getDeviceCount(), DEC);
|
||||
Serial.println(" devices.");
|
||||
|
||||
delay(1000);
|
||||
|
||||
Serial.print("Parasite power is: ");
|
||||
if (sensors.isParasitePowerMode()) Serial.println("ON");
|
||||
else Serial.println("OFF");
|
||||
|
||||
delay(1000);
|
||||
|
||||
|
||||
//Just search for devices. Only needed when connecting a new sensor to find the address
|
||||
oneWire.reset_search();
|
||||
|
||||
for (uint8_t i=0;i<sensors.getDeviceCount();i++){
|
||||
DeviceAddress _addr;
|
||||
if (!oneWire.search(_addr)) {
|
||||
Serial.print("Error: Device not found");
|
||||
}else{
|
||||
Serial.print("Found device. Address:");
|
||||
printAddress(_addr);
|
||||
}
|
||||
Serial.println();
|
||||
|
||||
}
|
||||
|
||||
sensors.setResolution(thermometerReservoir, TEMPERATURE_PRECISION);
|
||||
sensors.setResolution(thermometerAir, TEMPERATURE_PRECISION);
|
||||
|
||||
|
||||
Serial.println("Setup finished");
|
||||
delay(500);
|
||||
}
|
||||
|
||||
void loop() {
|
||||
|
|
@ -32,8 +126,8 @@ void loop() {
|
|||
|
||||
bool flag_print=false;
|
||||
|
||||
if (loopmillis>ec_last_read+EC_READ_INTERVAL) {
|
||||
ec_last_read=loopmillis;
|
||||
if (loopmillis>last_read_ec+EC_READ_INTERVAL) {
|
||||
last_read_ec=loopmillis;
|
||||
ec_array_pos++;
|
||||
flag_print= ec_array_pos==EC_ARRAY_SIZE;
|
||||
ec_array_pos%=EC_ARRAY_SIZE;
|
||||
|
|
@ -42,30 +136,104 @@ void loop() {
|
|||
//Serial.print(ec_array[ec_array_pos]); Serial.print(" ");
|
||||
}
|
||||
|
||||
static unsigned long last_read_ds18b20;
|
||||
static bool flag_requestTemperatures=false;
|
||||
if (loopmillis>last_read_ds18b20+READINTERVAL_DS18B20) {
|
||||
if (loopmillis>last_read_ds18b20+READINTERVAL_DS18B20*10) { //timeout
|
||||
Serial.println("Warn: Request Temperatures Timeout!");
|
||||
flag_requestTemperatures=false;
|
||||
}
|
||||
if (!flag_requestTemperatures) {
|
||||
sensors.requestTemperatures();
|
||||
flag_requestTemperatures=true;
|
||||
}
|
||||
if (sensors.isConversionComplete()) {
|
||||
flag_requestTemperatures=false;
|
||||
last_read_ds18b20=loopmillis;
|
||||
|
||||
//if (flag_print) {
|
||||
if (loopmillis>last_print+250) {
|
||||
tempC_reservoir = sensors.getTempC(thermometerReservoir);
|
||||
if (tempC_reservoir == DEVICE_DISCONNECTED_C)
|
||||
{
|
||||
Serial.print(" Error reading: "); printAddress(thermometerReservoir);
|
||||
}else{
|
||||
tempCmean_reservoir[tempCmean_pos]=tempC_reservoir;
|
||||
}
|
||||
|
||||
tempC_air = sensors.getTempC(thermometerAir);
|
||||
if (tempC_air == DEVICE_DISCONNECTED_C)
|
||||
{
|
||||
Serial.print(" Error reading: "); printAddress(thermometerReservoir);
|
||||
}else{
|
||||
tempCmean_air[tempCmean_pos]=tempC_air;
|
||||
}
|
||||
|
||||
tempCmean_pos++;
|
||||
tempCmean_pos%=TEMPMEAN_SIZE;
|
||||
}
|
||||
|
||||
|
||||
}
|
||||
|
||||
if (loopmillis>last_print+500) {
|
||||
last_print=loopmillis;
|
||||
Serial.print(getMean(ec_array),3);
|
||||
Serial.print("\t"); Serial.print(getMax(ec_array) - getMin(ec_array));
|
||||
|
||||
Serial.print("EC=");
|
||||
Serial.print(getMean(ec_array,EC_ARRAY_SIZE),3);
|
||||
Serial.print("\t spread="); Serial.print(getMax(ec_array,EC_ARRAY_SIZE) - getMin(ec_array,EC_ARRAY_SIZE));
|
||||
|
||||
if (isTempArrayOKf(tempCmean_reservoir,TEMPMEAN_SIZE,DEVICE_DISCONNECTED_C)){
|
||||
Serial.print("\t Treservoir="); Serial.print(getMeanf(tempCmean_reservoir,TEMPMEAN_SIZE)); Serial.print("\t Tair="); Serial.print(getMeanf(tempCmean_air,TEMPMEAN_SIZE));
|
||||
}else{
|
||||
Serial.print("\t waiting for temperature array");
|
||||
}
|
||||
|
||||
|
||||
Serial.println();
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
float getMean(uint16_t *parray) {
|
||||
float getMean(uint16_t *parray,uint16_t psize) {
|
||||
double mean=0;
|
||||
for (uint16_t i=0;i<EC_ARRAY_SIZE;i++) {
|
||||
for (uint16_t i=0;i<psize;i++) {
|
||||
mean+=parray[i];
|
||||
}
|
||||
|
||||
return mean/EC_ARRAY_SIZE;
|
||||
return mean/psize;
|
||||
}
|
||||
float getMeanf(float *parray,uint16_t psize) {
|
||||
double mean=0;
|
||||
for (uint16_t i=0;i<psize;i++) {
|
||||
mean+=parray[i];
|
||||
}
|
||||
|
||||
return mean/psize;
|
||||
}
|
||||
|
||||
bool isTempArrayOK(uint16_t *parray,uint16_t psize, uint16_t pcheck) { //check if array has error values
|
||||
for (uint16_t i=0;i<psize;i++) {
|
||||
if (parray[i]==pcheck){
|
||||
return false;
|
||||
}
|
||||
}
|
||||
return true;
|
||||
}
|
||||
bool isTempArrayOKf(float *parray,uint16_t psize, float pcheck) { //check if array has error values
|
||||
for (uint16_t i=0;i<psize;i++) {
|
||||
if (parray[i]==pcheck){
|
||||
return false;
|
||||
}
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
|
||||
uint16_t getMin(uint16_t *parray) {
|
||||
|
||||
|
||||
uint16_t getMin(uint16_t *parray, uint16_t psize) {
|
||||
uint16_t min=65535;
|
||||
for (uint16_t i=0;i<EC_ARRAY_SIZE;i++) {
|
||||
for (uint16_t i=0;i<psize;i++) {
|
||||
if (parray[i]<min) {
|
||||
min=parray[i];
|
||||
}
|
||||
|
|
@ -74,9 +242,9 @@ uint16_t getMin(uint16_t *parray) {
|
|||
return min;
|
||||
}
|
||||
|
||||
uint16_t getMax(uint16_t *parray) {
|
||||
uint16_t getMax(uint16_t *parray,uint16_t psize) {
|
||||
uint16_t max=0;
|
||||
for (uint16_t i=0;i<EC_ARRAY_SIZE;i++) {
|
||||
for (uint16_t i=0;i<psize;i++) {
|
||||
if (parray[i]>max) {
|
||||
max=parray[i];
|
||||
}
|
||||
|
|
@ -84,3 +252,16 @@ uint16_t getMax(uint16_t *parray) {
|
|||
|
||||
return max;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
void printAddress(DeviceAddress deviceAddress)
|
||||
{
|
||||
for (uint8_t i = 0; i < 8; i++)
|
||||
{
|
||||
// zero pad the address if necessary
|
||||
if (deviceAddress[i] < 16) Serial.print("0");
|
||||
Serial.print(deviceAddress[i], HEX);
|
||||
}
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue