; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[env:esp32doit-devkit-v1_NFT_2024]
platform = espressif32
board = esp32doit-devkit-v1
framework = arduino

monitor_speed = 115200
monitor_port = /dev/ttyUSB0

build_flags=
    '-D CLIENT_ID="hydroponic-NFT"'
    -D PIN_BUTTON=12
    -D PIN_LED=13
    -D EC_PIN_RELAY_PROBE=27
    -D EC_PIN_FREQ=5
    -D EC_CALIBRATION_POLYNOM={18.785904241636743,-0.04069178351449846,3.528797358514823e-05,-4.214254847500995e-09,2.543662736303669e-13}
    -D EC_CALIBRATION_LINEARIZE_BELOW_ADC=2000
    -D EC_CALIBRATION_LINEAR_LOWADC=728
    -D EC_CALIBRATION_LINEAR_LOWEC=0
    -D FLOW_PIN=16
    -D ONE_WIRE_BUS_PIN=18
    -D THERMOMETER_ADDR_RESERVOIR={0x28,0xFF,0x6F,0x19,0x72,0x16,0x05,0x44}
    -D THERMOMETER_ADDR_CASE={0x10,0x7E,0x22,0x99,0x01,0x08,0x00,0xA4}
    -D PIN_SDA=21
    -D PIN_SCL=22
    -D WATERLEVEL_OFFSET=500.0
    -D WATERLEVEL_FACTOR=-1.0
    -D RES_AREA=20*20*3.1416

lib_deps =
    https://github.com/milesburton/Arduino-Temperature-Control-Library/
    https://github.com/emilv/ArduinoSort/
    robtillaart/ADS1X15@^0.3.9
    256dpi/MQTT@^2.5.1    
    pololu/VL53L0X@^1.3.1



[env:esp32-s3-devkitm-1_DB]
platform = platformio/espressif32@^6.7
board = esp32-s3-devkitm-1
;Devboard is ESP32-S3-DevKitC-1 (N16R8). board=esp32-s3-devkitm-1 works fine
framework = arduino
monitor_port = /dev/ttyACM1

monitor_speed = 115200



build_flags=
    '-D CLIENT_ID="hydroponic-DB"'
    -D PIN_BUTTON=12

    -D EC_PIN_RELAY_PROBE=35
    -D EC_PIN_FREQ=38
    
    -D EC_CALIBRATION_POLYNOM={8.718380956513695,-0.026463423062356713,3.425216464107108e-05,-4.069826379094172e-09,2.478900495960682e-13}
    -D EC_CALIBRATION_LINEARIZE_BELOW_ADC=2000
    -D EC_CALIBRATION_LINEAR_LOWADC=728
    -D EC_CALIBRATION_LINEAR_LOWEC=0

    -D FLOW_PIN=17
    -D ONE_WIRE_BUS_PIN=18
    -D THERMOMETER_ADDR_RESERVOIR={0x28,0xFF,0x30,0xBA,0x85,0x16,0x03,0xB5}
    -D THERMOMETER_ADDR_CASE={0x28,0xFF,0x64,0x0E,0x75,0x83,0x09,0x6F}

    -D PIN_SDA=1
    -D PIN_SCL=2

    -D WATERLEVEL_OFFSET=315.0
    -D WATERLEVEL_FACTOR=-1.0
    -D RES_AREA=37*56

lib_deps =
    https://github.com/milesburton/Arduino-Temperature-Control-Library/
    https://github.com/emilv/ArduinoSort/
    robtillaart/ADS1X15@^0.3.9
    256dpi/MQTT@^2.5.2
    pololu/VL53L0X@^1.3.1
    adafruit/Adafruit NeoPixel




[env:esp32-s3-devkitm-1_NFT]
platform = platformio/espressif32@^6.7
board = esp32-s3-devkitm-1
;Devboard is ESP32-S3-DevKitC-1 (N16R8). board=esp32-s3-devkitm-1 works fine
framework = arduino

monitor_speed = 115200
monitor_port = /dev/ttyACM0



build_flags=
    '-D CLIENT_ID="hydroponic-NFT"'
    -D PIN_BUTTON=12

    -D EC_PIN_RELAY_PROBE=35
    -D EC_PIN_FREQ=38
    
    -D EC_CALIBRATION_POLYNOM={8.718380956513695,-0.026463423062356713,3.425216464107108e-05,-4.069826379094172e-09,2.478900495960682e-13}
    -D EC_CALIBRATION_LINEARIZE_BELOW_ADC=2000
    -D EC_CALIBRATION_LINEAR_LOWADC=728
    -D EC_CALIBRATION_LINEAR_LOWEC=0

    -D FLOW_PIN=17
    -D ONE_WIRE_BUS_PIN=18
    -D THERMOMETER_ADDR_RESERVOIR={0x28,0xFF,0x6F,0x19,0x72,0x16,0x05,0x44}
    -D THERMOMETER_ADDR_CASE={0x28,0xFF,0x64,0x0E,0x75,0x90,0xDE,0x02}

    -D PIN_SDA=1
    -D PIN_SCL=2

    -D WATERLEVEL_OFFSET=500.0
    -D WATERLEVEL_FACTOR=-1.0
    -D RES_AREA=20*20*3.1416

lib_deps =
    https://github.com/milesburton/Arduino-Temperature-Control-Library/
    https://github.com/emilv/ArduinoSort/
    robtillaart/ADS1X15@^0.3.9
    256dpi/MQTT@^2.5.2
    pololu/VL53L0X@^1.3.1
    adafruit/Adafruit NeoPixel