719 lines
35 KiB
C
719 lines
35 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_hal_mmc.h
|
|
* @author MCD Application Team
|
|
* @version V1.1.1
|
|
* @date 12-May-2017
|
|
* @brief Header file of MMC HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F1xx_HAL_MMC_H
|
|
#define __STM32F1xx_HAL_MMC_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_ll_sdmmc.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup MMC MMC
|
|
* @brief MMC HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup MMC_Exported_Types MMC Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Types_Group1 MMC State enumeration structure
|
|
* @{
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_MMC_STATE_RESET = 0x00000000U, /*!< MMC not yet initialized or disabled */
|
|
HAL_MMC_STATE_READY = 0x00000001U, /*!< MMC initialized and ready for use */
|
|
HAL_MMC_STATE_TIMEOUT = 0x00000002U, /*!< MMC Timeout state */
|
|
HAL_MMC_STATE_BUSY = 0x00000003U, /*!< MMC process ongoing */
|
|
HAL_MMC_STATE_PROGRAMMING = 0x00000004U, /*!< MMC Programming State */
|
|
HAL_MMC_STATE_RECEIVING = 0x00000005U, /*!< MMC Receinving State */
|
|
HAL_MMC_STATE_TRANSFER = 0x00000006U, /*!< MMC Transfert State */
|
|
HAL_MMC_STATE_ERROR = 0x0000000FU /*!< MMC is in error state */
|
|
}HAL_MMC_StateTypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Types_Group2 MMC Card State enumeration structure
|
|
* @{
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_MMC_CARD_READY = 0x00000001U, /*!< Card state is ready */
|
|
HAL_MMC_CARD_IDENTIFICATION = 0x00000002U, /*!< Card is in identification state */
|
|
HAL_MMC_CARD_STANDBY = 0x00000003U, /*!< Card is in standby state */
|
|
HAL_MMC_CARD_TRANSFER = 0x00000004U, /*!< Card is in transfer state */
|
|
HAL_MMC_CARD_SENDING = 0x00000005U, /*!< Card is sending an operation */
|
|
HAL_MMC_CARD_RECEIVING = 0x00000006U, /*!< Card is receiving operation information */
|
|
HAL_MMC_CARD_PROGRAMMING = 0x00000007U, /*!< Card is in programming state */
|
|
HAL_MMC_CARD_DISCONNECTED = 0x00000008U, /*!< Card is disconnected */
|
|
HAL_MMC_CARD_ERROR = 0x000000FFU /*!< Card response Error */
|
|
}HAL_MMC_CardStateTypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Types_Group3 MMC Handle Structure definition
|
|
* @{
|
|
*/
|
|
#define MMC_InitTypeDef SDIO_InitTypeDef
|
|
#define MMC_TypeDef SDIO_TypeDef
|
|
|
|
/**
|
|
* @brief MMC Card Information Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t CardType; /*!< Specifies the card Type */
|
|
|
|
uint32_t Class; /*!< Specifies the class of the card class */
|
|
|
|
uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */
|
|
|
|
uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */
|
|
|
|
uint32_t BlockSize; /*!< Specifies one block size in bytes */
|
|
|
|
uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */
|
|
|
|
uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */
|
|
|
|
}HAL_MMC_CardInfoTypeDef;
|
|
|
|
/**
|
|
* @brief MMC handle Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
MMC_TypeDef *Instance; /*!< MMC registers base address */
|
|
|
|
MMC_InitTypeDef Init; /*!< MMC required parameters */
|
|
|
|
HAL_LockTypeDef Lock; /*!< MMC locking object */
|
|
|
|
uint32_t *pTxBuffPtr; /*!< Pointer to MMC Tx transfer Buffer */
|
|
|
|
uint32_t TxXferSize; /*!< MMC Tx Transfer size */
|
|
|
|
uint32_t *pRxBuffPtr; /*!< Pointer to MMC Rx transfer Buffer */
|
|
|
|
uint32_t RxXferSize; /*!< MMC Rx Transfer size */
|
|
|
|
__IO uint32_t Context; /*!< MMC transfer context */
|
|
|
|
__IO HAL_MMC_StateTypeDef State; /*!< MMC card State */
|
|
|
|
__IO uint32_t ErrorCode; /*!< MMC Card Error codes */
|
|
|
|
DMA_HandleTypeDef *hdmarx; /*!< MMC Rx DMA handle parameters */
|
|
|
|
DMA_HandleTypeDef *hdmatx; /*!< MMC Tx DMA handle parameters */
|
|
|
|
HAL_MMC_CardInfoTypeDef MmcCard; /*!< MMC Card information */
|
|
|
|
uint32_t CSD[4U]; /*!< MMC card specific data table */
|
|
|
|
uint32_t CID[4U]; /*!< MMC card identification number table */
|
|
|
|
}MMC_HandleTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Types_Group4 Card Specific Data: CSD Register
|
|
* @{
|
|
*/
|
|
typedef struct
|
|
{
|
|
__IO uint8_t CSDStruct; /*!< CSD structure */
|
|
__IO uint8_t SysSpecVersion; /*!< System specification version */
|
|
__IO uint8_t Reserved1; /*!< Reserved */
|
|
__IO uint8_t TAAC; /*!< Data read access time 1 */
|
|
__IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
|
|
__IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
|
|
__IO uint16_t CardComdClasses; /*!< Card command classes */
|
|
__IO uint8_t RdBlockLen; /*!< Max. read data block length */
|
|
__IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
|
|
__IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
|
|
__IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
|
|
__IO uint8_t DSRImpl; /*!< DSR implemented */
|
|
__IO uint8_t Reserved2; /*!< Reserved */
|
|
__IO uint32_t DeviceSize; /*!< Device Size */
|
|
__IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
|
|
__IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
|
|
__IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
|
|
__IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
|
|
__IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
|
|
__IO uint8_t EraseGrSize; /*!< Erase group size */
|
|
__IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
|
|
__IO uint8_t WrProtectGrSize; /*!< Write protect group size */
|
|
__IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
|
|
__IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
|
|
__IO uint8_t WrSpeedFact; /*!< Write speed factor */
|
|
__IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
|
|
__IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
|
|
__IO uint8_t Reserved3; /*!< Reserved */
|
|
__IO uint8_t ContentProtectAppli; /*!< Content protection application */
|
|
__IO uint8_t FileFormatGrouop; /*!< File format group */
|
|
__IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
|
|
__IO uint8_t PermWrProtect; /*!< Permanent write protection */
|
|
__IO uint8_t TempWrProtect; /*!< Temporary write protection */
|
|
__IO uint8_t FileFormat; /*!< File format */
|
|
__IO uint8_t ECC; /*!< ECC code */
|
|
__IO uint8_t CSD_CRC; /*!< CSD CRC */
|
|
__IO uint8_t Reserved4; /*!< Always 1 */
|
|
|
|
}HAL_MMC_CardCSDTypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Types_Group5 Card Identification Data: CID Register
|
|
* @{
|
|
*/
|
|
typedef struct
|
|
{
|
|
__IO uint8_t ManufacturerID; /*!< Manufacturer ID */
|
|
__IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
|
|
__IO uint32_t ProdName1; /*!< Product Name part1 */
|
|
__IO uint8_t ProdName2; /*!< Product Name part2 */
|
|
__IO uint8_t ProdRev; /*!< Product Revision */
|
|
__IO uint32_t ProdSN; /*!< Product Serial Number */
|
|
__IO uint8_t Reserved1; /*!< Reserved1 */
|
|
__IO uint16_t ManufactDate; /*!< Manufacturing Date */
|
|
__IO uint8_t CID_CRC; /*!< CID CRC */
|
|
__IO uint8_t Reserved2; /*!< Always 1 */
|
|
|
|
}HAL_MMC_CardCIDTypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Types_Group6 MMC Card Status returned by ACMD13
|
|
* @{
|
|
*/
|
|
typedef struct
|
|
{
|
|
__IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */
|
|
__IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */
|
|
__IO uint16_t CardType; /*!< Carries information about card type */
|
|
__IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */
|
|
__IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */
|
|
__IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */
|
|
__IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */
|
|
__IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */
|
|
__IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */
|
|
__IO uint8_t EraseOffset; /*!< Carries information about the erase offset */
|
|
|
|
}HAL_MMC_CardStatusTypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup MMC_Exported_Constants Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
#define BLOCKSIZE 512U /*!< Block size is 512 bytes */
|
|
|
|
#define CAPACITY 0x400000U /*!< Log Block Nuumber for 2 G bytes Cards */
|
|
|
|
/** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition
|
|
* @{
|
|
*/
|
|
#define HAL_MMC_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */
|
|
#define HAL_MMC_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */
|
|
#define HAL_MMC_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */
|
|
#define HAL_MMC_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */
|
|
#define HAL_MMC_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */
|
|
#define HAL_MMC_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */
|
|
#define HAL_MMC_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */
|
|
#define HAL_MMC_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */
|
|
#define HAL_MMC_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the
|
|
number of transferred bytes does not match the block length */
|
|
#define HAL_MMC_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */
|
|
#define HAL_MMC_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */
|
|
#define HAL_MMC_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */
|
|
#define HAL_MMC_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock
|
|
command or if there was an attempt to access a locked card */
|
|
#define HAL_MMC_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */
|
|
#define HAL_MMC_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */
|
|
#define HAL_MMC_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */
|
|
#define HAL_MMC_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */
|
|
#define HAL_MMC_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */
|
|
#define HAL_MMC_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */
|
|
#define HAL_MMC_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */
|
|
#define HAL_MMC_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */
|
|
#define HAL_MMC_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */
|
|
#define HAL_MMC_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */
|
|
#define HAL_MMC_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out
|
|
of erase sequence command was received */
|
|
#define HAL_MMC_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */
|
|
#define HAL_MMC_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */
|
|
#define HAL_MMC_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */
|
|
#define HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */
|
|
#define HAL_MMC_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */
|
|
#define HAL_MMC_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */
|
|
#define HAL_MMC_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */
|
|
#define HAL_MMC_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */
|
|
#define HAL_MMC_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration structure
|
|
* @{
|
|
*/
|
|
#define MMC_CONTEXT_NONE 0x00000000U /*!< None */
|
|
#define MMC_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */
|
|
#define MMC_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */
|
|
#define MMC_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */
|
|
#define MMC_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */
|
|
#define MMC_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */
|
|
#define MMC_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Constansts_Group3 MMC Voltage mode
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief
|
|
*/
|
|
#define MMC_HIGH_VOLTAGE_RANGE 0x80FF8000U /*!< VALUE OF ARGUMENT */
|
|
#define MMC_DUAL_VOLTAGE_RANGE 0x80FF8080U /*!< VALUE OF ARGUMENT */
|
|
#define eMMC_HIGH_VOLTAGE_RANGE 0xC0FF8000U /*!< for eMMC > 2Gb sector mode */
|
|
#define eMMC_DUAL_VOLTAGE_RANGE 0xC0FF8080U /*!< for eMMC > 2Gb sector mode */
|
|
#define MMC_INVALID_VOLTAGE_RANGE 0x0001FF01U
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards
|
|
* @{
|
|
*/
|
|
#define MMC_HIGH_VOLTAGE_CARD 0x00000000U
|
|
#define MMC_DUAL_VOLTAGE_CARD 0x00000001U
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup MMC_Exported_macros MMC Exported Macros
|
|
* @brief macros to handle interrupts and specific clock configurations
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable the MMC device.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_MMC_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance)
|
|
|
|
/**
|
|
* @brief Disable the MMC device.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_MMC_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance)
|
|
|
|
/**
|
|
* @brief Enable the SDMMC DMA transfer.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_MMC_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance)
|
|
|
|
/**
|
|
* @brief Disable the SDMMC DMA transfer.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_MMC_DMA_DISABLE(__HANDLE__) __SDIO_DMA_DISABLE((__HANDLE__)->Instance)
|
|
|
|
/**
|
|
* @brief Enable the MMC device interrupt.
|
|
* @param __HANDLE__: MMC Handle
|
|
* @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled.
|
|
* This parameter can be one or a combination of the following values:
|
|
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
|
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
|
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
|
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
|
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
|
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
|
|
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
|
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
|
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
|
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
|
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
|
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
|
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
|
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
|
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
|
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
|
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
|
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_MMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the MMC device interrupt.
|
|
* @param __HANDLE__: MMC Handle
|
|
* @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled.
|
|
* This parameter can be one or a combination of the following values:
|
|
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
|
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
|
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
|
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
|
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
|
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
|
|
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
|
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
|
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
|
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
|
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
|
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
|
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
|
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
|
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
|
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
|
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
|
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_MMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Check whether the specified MMC flag is set or not.
|
|
* @param __HANDLE__: MMC Handle
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
|
|
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
|
|
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
|
|
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
|
|
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
|
|
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
|
|
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
|
|
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
|
|
* @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
|
|
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
|
|
* @arg SDIO_FLAG_CMDACT: Command transfer in progress
|
|
* @arg SDIO_FLAG_TXACT: Data transmit in progress
|
|
* @arg SDIO_FLAG_RXACT: Data receive in progress
|
|
* @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
|
|
* @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
|
|
* @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
|
|
* @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
|
|
* @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
|
|
* @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
|
|
* @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
|
|
* @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
|
|
* @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
|
|
* @retval The new state of MMC FLAG (SET or RESET).
|
|
*/
|
|
#define __HAL_MMC_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
|
|
|
|
/**
|
|
* @brief Clear the MMC's pending flags.
|
|
* @param __HANDLE__: MMC Handle
|
|
* @param __FLAG__: specifies the flag to clear.
|
|
* This parameter can be one or a combination of the following values:
|
|
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
|
|
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
|
|
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
|
|
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
|
|
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
|
|
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
|
|
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
|
|
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
|
|
* @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
|
|
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
|
|
* @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
|
|
* @retval None
|
|
*/
|
|
#define __HAL_MMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
|
|
|
|
/**
|
|
* @brief Check whether the specified MMC interrupt has occurred or not.
|
|
* @param __HANDLE__: MMC Handle
|
|
* @param __INTERRUPT__: specifies the SDMMC interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
|
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
|
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
|
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
|
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
|
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
|
|
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
|
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
|
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
|
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
|
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
|
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
|
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
|
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
|
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
|
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
|
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
|
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
|
* @retval The new state of MMC IT (SET or RESET).
|
|
*/
|
|
#define __HAL_MMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Clear the MMC's interrupt pending bits.
|
|
* @param __HANDLE__: MMC Handle
|
|
* @param __INTERRUPT__: specifies the interrupt pending bit to clear.
|
|
* This parameter can be one or a combination of the following values:
|
|
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
|
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
|
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
|
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
|
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
|
* @arg SDIO_IT_DATAEND: Data end (data counter, SDMMC_DCOUNT, is zero) interrupt
|
|
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_MMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @defgroup MMC_Exported_Functions MMC Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc);
|
|
HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc);
|
|
HAL_StatusTypeDef HAL_MMC_DeInit (MMC_HandleTypeDef *hmmc);
|
|
void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc);
|
|
void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Functions_Group2 Input and Output operation functions
|
|
* @{
|
|
*/
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
|
|
/* Non-Blocking mode: IT */
|
|
HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
|
HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
|
/* Non-Blocking mode: DMA */
|
|
HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
|
HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
|
|
|
void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc);
|
|
|
|
/* Callback in non blocking modes (DMA) */
|
|
void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc);
|
|
void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc);
|
|
void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc);
|
|
void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Functions_Group3 Peripheral Control functions
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Functions_Group4 MMC card related functions
|
|
* @{
|
|
*/
|
|
HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc);
|
|
HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID);
|
|
HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD);
|
|
HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Functions_Group5 Peripheral State and Errors functions
|
|
* @{
|
|
*/
|
|
HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc);
|
|
uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup MMC_Exported_Functions_Group6 Perioheral Abort management
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc);
|
|
HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private types -------------------------------------------------------------*/
|
|
/** @defgroup MMC_Private_Types MMC Private Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private defines -----------------------------------------------------------*/
|
|
/** @defgroup MMC_Private_Defines MMC Private Defines
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/** @defgroup MMC_Private_Variables MMC Private Variables
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup MMC_Private_Constants MMC Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup MMC_Private_Macros MMC Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private functions prototypes ----------------------------------------------*/
|
|
/** @defgroup MMC_Private_Functions_Prototypes MMC Private Functions Prototypes
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
/** @defgroup MMC_Private_Functions MMC Private Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* STM32F103xE || STM32F103xG */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
|
|
#endif /* __STM32F1xx_HAL_MMC_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|