234 lines
8.5 KiB
C
234 lines
8.5 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_hal_spi_ex.c
|
|
* @author MCD Application Team
|
|
* @version V1.1.1
|
|
* @date 12-May-2017
|
|
* @brief Extended SPI HAL module driver.
|
|
*
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities SPI extension peripheral:
|
|
* + Extended Peripheral Control functions
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_hal.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup SPI
|
|
* @{
|
|
*/
|
|
#ifdef HAL_SPI_MODULE_ENABLED
|
|
|
|
/** @defgroup SPI_Private_Variables SPI Private Variables
|
|
* @{
|
|
*/
|
|
#if (USE_SPI_CRC != 0U)
|
|
/* Variable used to determine if device is impacted by implementation of workaround
|
|
related to wrong CRC errors detection on SPI2. Conditions in which this workaround has to be applied, are:
|
|
- STM32F101CDE/STM32F103CDE
|
|
- Revision ID : Z
|
|
- SPI2
|
|
- In receive only mode, with CRC calculation enabled, at the end of the CRC reception,
|
|
the software needs to check the CRCERR flag. If it is found set, read back the SPI_RXCRC:
|
|
+ If the value is 0, the complete data transfer is successful.
|
|
+ Otherwise, one or more errors have been detected during the data transfer by CPU or DMA.
|
|
If CRCERR is found reset, the complete data transfer is considered successful.
|
|
*/
|
|
uint8_t uCRCErrorWorkaroundCheck = 0U;
|
|
#endif /* USE_SPI_CRC */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/** @addtogroup SPI_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup SPI_Exported_Functions_Group1
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initializes the SPI according to the specified parameters
|
|
* in the SPI_InitTypeDef and create the associated handle.
|
|
* @param hspi: pointer to a SPI_HandleTypeDef structure that contains
|
|
* the configuration information for SPI module.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi)
|
|
{
|
|
/* Check the SPI handle allocation */
|
|
if(hspi == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance));
|
|
assert_param(IS_SPI_MODE(hspi->Init.Mode));
|
|
assert_param(IS_SPI_DIRECTION(hspi->Init.Direction));
|
|
assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize));
|
|
assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity));
|
|
assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase));
|
|
assert_param(IS_SPI_NSS(hspi->Init.NSS));
|
|
assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
|
|
assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit));
|
|
|
|
#if (USE_SPI_CRC != 0U)
|
|
assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation));
|
|
if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
|
|
{
|
|
assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial));
|
|
}
|
|
#else
|
|
hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
|
#endif /* USE_SPI_CRC */
|
|
|
|
if(hspi->State == HAL_SPI_STATE_RESET)
|
|
{
|
|
/* Init the low level hardware : GPIO, CLOCK, NVIC... */
|
|
HAL_SPI_MspInit(hspi);
|
|
}
|
|
|
|
hspi->State = HAL_SPI_STATE_BUSY;
|
|
|
|
/* Disble the selected SPI peripheral */
|
|
__HAL_SPI_DISABLE(hspi);
|
|
|
|
/*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/
|
|
/* Configure : SPI Mode, Communication Mode, Data size, Clock polarity and phase, NSS management,
|
|
Communication speed, First bit and CRC calculation state */
|
|
WRITE_REG(hspi->Instance->CR1, (hspi->Init.Mode | hspi->Init.Direction | hspi->Init.DataSize |
|
|
hspi->Init.CLKPolarity | hspi->Init.CLKPhase | (hspi->Init.NSS & SPI_CR1_SSM) |
|
|
hspi->Init.BaudRatePrescaler | hspi->Init.FirstBit | hspi->Init.CRCCalculation) );
|
|
|
|
/* Configure : NSS management */
|
|
WRITE_REG(hspi->Instance->CR2, (((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE) | hspi->Init.TIMode));
|
|
|
|
/*---------------------------- SPIx CRCPOLY Configuration ------------------*/
|
|
/* Configure : CRC Polynomial */
|
|
WRITE_REG(hspi->Instance->CRCPR, hspi->Init.CRCPolynomial);
|
|
|
|
#if defined(SPI_I2SCFGR_I2SMOD)
|
|
/* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */
|
|
CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD);
|
|
#endif /* SPI_I2SCFGR_I2SMOD */
|
|
|
|
#if (USE_SPI_CRC != 0U)
|
|
#if defined (STM32F101xE) || defined (STM32F103xE)
|
|
/* Check RevisionID value for identifying if Device is Rev Z (0x0001) in order to enable workaround for
|
|
CRC errors wrongly detected */
|
|
/* Pb is that ES_STM32F10xxCDE also identify an issue in Debug registers access while not in Debug mode.
|
|
Revision ID information is only available in Debug mode, so Workaround could not be implemented
|
|
to distinguish Rev Z devices (issue present) from more recent version (issue fixed).
|
|
So, in case of Revison Z F101 or F103 devices, below variable should be assigned to 1 */
|
|
uCRCErrorWorkaroundCheck = 0U;
|
|
#else
|
|
uCRCErrorWorkaroundCheck = 0U;
|
|
#endif /* STM32F101xE || STM32F103xE */
|
|
#endif /* USE_SPI_CRC */
|
|
|
|
hspi->ErrorCode = HAL_SPI_ERROR_NONE;
|
|
hspi->State = HAL_SPI_STATE_READY;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup SPI_Private_Functions
|
|
* @{
|
|
*/
|
|
#if (USE_SPI_CRC != 0U)
|
|
/**
|
|
* @brief Checks if encountered CRC error could be corresponding to wrongly detected errors
|
|
* according to SPI instance, Device type, and revision ID.
|
|
* @param hspi: pointer to a SPI_HandleTypeDef structure that contains
|
|
* the configuration information for SPI module.
|
|
* @retval CRC error validity (SPI_INVALID_CRC_ERROR or SPI_VALID_CRC_ERROR).
|
|
*/
|
|
uint8_t SPI_ISCRCErrorValid(SPI_HandleTypeDef *hspi)
|
|
{
|
|
#if defined(STM32F101xE) || defined(STM32F103xE)
|
|
/* Check how to handle this CRC error (workaround to be applied or not) */
|
|
/* If CRC errors could be wrongly detected (issue 2.15.2 in STM32F10xxC/D/E silicon limitations ES (DocID14732 Rev 13) */
|
|
if((uCRCErrorWorkaroundCheck != 0U) && (hspi->Instance == SPI2))
|
|
{
|
|
if(hspi->Instance->RXCRCR == 0U)
|
|
{
|
|
return (SPI_INVALID_CRC_ERROR);
|
|
}
|
|
}
|
|
return (SPI_VALID_CRC_ERROR);
|
|
#else
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hspi);
|
|
|
|
return (SPI_VALID_CRC_ERROR);
|
|
#endif
|
|
}
|
|
#endif /* USE_SPI_CRC */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* HAL_SPI_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|