640 lines
22 KiB
C
640 lines
22 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_hal_pwr.c
|
|
* @author MCD Application Team
|
|
* @version V1.1.1
|
|
* @date 12-May-2017
|
|
* @brief PWR HAL module driver.
|
|
*
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the Power Controller (PWR) peripheral:
|
|
* + Initialization/de-initialization functions
|
|
* + Peripheral Control functions
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_hal.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWR PWR
|
|
* @brief PWR HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_PWR_MODULE_ENABLED
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
|
|
/** @defgroup PWR_Private_Constants PWR Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
|
|
* @{
|
|
*/
|
|
#define PVD_MODE_IT 0x00010000U
|
|
#define PVD_MODE_EVT 0x00020000U
|
|
#define PVD_RISING_EDGE 0x00000001U
|
|
#define PVD_FALLING_EDGE 0x00000002U
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup PWR_register_alias_address PWR Register alias address
|
|
* @{
|
|
*/
|
|
/* ------------- PWR registers bit address in the alias region ---------------*/
|
|
#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
|
|
#define PWR_CR_OFFSET 0x00U
|
|
#define PWR_CSR_OFFSET 0x04U
|
|
#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET)
|
|
#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_CR_register_alias PWR CR Register alias address
|
|
* @{
|
|
*/
|
|
/* --- CR Register ---*/
|
|
/* Alias word address of LPSDSR bit */
|
|
#define LPSDSR_BIT_NUMBER PWR_CR_LPDS_Pos
|
|
#define CR_LPSDSR_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPSDSR_BIT_NUMBER * 4U)))
|
|
|
|
/* Alias word address of DBP bit */
|
|
#define DBP_BIT_NUMBER PWR_CR_DBP_Pos
|
|
#define CR_DBP_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U)))
|
|
|
|
/* Alias word address of PVDE bit */
|
|
#define PVDE_BIT_NUMBER PWR_CR_PVDE_Pos
|
|
#define CR_PVDE_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U)))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
|
|
* @{
|
|
*/
|
|
|
|
/* --- CSR Register ---*/
|
|
/* Alias word address of EWUP1 bit */
|
|
#define CSR_EWUP_BB(VAL) ((uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (POSITION_VAL(VAL) * 4U)))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/** @defgroup PWR_Private_Functions PWR Private Functions
|
|
* brief WFE cortex command overloaded for HAL_PWR_EnterSTOPMode usage only (see Workaround section)
|
|
* @{
|
|
*/
|
|
static void PWR_OverloadWfe(void);
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
__NOINLINE
|
|
static void PWR_OverloadWfe(void)
|
|
{
|
|
__asm volatile( "wfe" );
|
|
__asm volatile( "nop" );
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup PWR_Exported_Functions PWR Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @brief Initialization and de-initialization functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Initialization and de-initialization functions #####
|
|
===============================================================================
|
|
[..]
|
|
After reset, the backup domain (RTC registers, RTC backup data
|
|
registers) is protected against possible unwanted
|
|
write accesses.
|
|
To enable access to the RTC Domain and RTC registers, proceed as follows:
|
|
(+) Enable the Power Controller (PWR) APB1 interface clock using the
|
|
__HAL_RCC_PWR_CLK_ENABLE() macro.
|
|
(+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Deinitializes the PWR peripheral registers to their default reset values.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_DeInit(void)
|
|
{
|
|
__HAL_RCC_PWR_FORCE_RESET();
|
|
__HAL_RCC_PWR_RELEASE_RESET();
|
|
}
|
|
|
|
/**
|
|
* @brief Enables access to the backup domain (RTC registers, RTC
|
|
* backup data registers ).
|
|
* @note If the HSE divided by 128 is used as the RTC clock, the
|
|
* Backup Domain Access should be kept enabled.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnableBkUpAccess(void)
|
|
{
|
|
/* Enable access to RTC and backup registers */
|
|
*(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables access to the backup domain (RTC registers, RTC
|
|
* backup data registers).
|
|
* @note If the HSE divided by 128 is used as the RTC clock, the
|
|
* Backup Domain Access should be kept enabled.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_DisableBkUpAccess(void)
|
|
{
|
|
/* Disable access to RTC and backup registers */
|
|
*(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
|
|
* @brief Low Power modes configuration functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Peripheral Control functions #####
|
|
===============================================================================
|
|
|
|
*** PVD configuration ***
|
|
=========================
|
|
[..]
|
|
(+) The PVD is used to monitor the VDD power supply by comparing it to a
|
|
threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
|
|
|
|
(+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
|
|
than the PVD threshold. This event is internally connected to the EXTI
|
|
line16 and can generate an interrupt if enabled. This is done through
|
|
__HAL_PVD_EXTI_ENABLE_IT() macro.
|
|
(+) The PVD is stopped in Standby mode.
|
|
|
|
*** WakeUp pin configuration ***
|
|
================================
|
|
[..]
|
|
(+) WakeUp pin is used to wake up the system from Standby mode. This pin is
|
|
forced in input pull-down configuration and is active on rising edges.
|
|
(+) There is one WakeUp pin:
|
|
WakeUp Pin 1 on PA.00.
|
|
|
|
[..]
|
|
|
|
*** Low Power modes configuration ***
|
|
=====================================
|
|
[..]
|
|
The device features 3 low-power modes:
|
|
(+) Sleep mode: CPU clock off, all peripherals including Cortex-M3 core peripherals like
|
|
NVIC, SysTick, etc. are kept running
|
|
(+) Stop mode: All clocks are stopped
|
|
(+) Standby mode: 1.8V domain powered off
|
|
|
|
|
|
*** Sleep mode ***
|
|
==================
|
|
[..]
|
|
(+) Entry:
|
|
The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx)
|
|
functions with
|
|
(++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
|
|
(++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
|
|
|
|
(+) Exit:
|
|
(++) WFI entry mode, Any peripheral interrupt acknowledged by the nested vectored interrupt
|
|
controller (NVIC) can wake up the device from Sleep mode.
|
|
(++) WFE entry mode, Any wakeup event can wake up the device from Sleep mode.
|
|
(+++) Any peripheral interrupt w/o NVIC configuration & SEVONPEND bit set in the Cortex (HAL_PWR_EnableSEVOnPend)
|
|
(+++) Any EXTI Line (Internal or External) configured in Event mode
|
|
|
|
*** Stop mode ***
|
|
=================
|
|
[..]
|
|
The Stop mode is based on the Cortex-M3 deepsleep mode combined with peripheral
|
|
clock gating. The voltage regulator can be configured either in normal or low-power mode.
|
|
In Stop mode, all clocks in the 1.8 V domain are stopped, the PLL, the HSI and the HSE RC
|
|
oscillators are disabled. SRAM and register contents are preserved.
|
|
In Stop mode, all I/O pins keep the same state as in Run mode.
|
|
|
|
(+) Entry:
|
|
The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_REGULATOR_VALUE, PWR_SLEEPENTRY_WFx )
|
|
function with:
|
|
(++) PWR_REGULATOR_VALUE= PWR_MAINREGULATOR_ON: Main regulator ON.
|
|
(++) PWR_REGULATOR_VALUE= PWR_LOWPOWERREGULATOR_ON: Low Power regulator ON.
|
|
(++) PWR_SLEEPENTRY_WFx= PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction
|
|
(++) PWR_SLEEPENTRY_WFx= PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction
|
|
(+) Exit:
|
|
(++) WFI entry mode, Any EXTI Line (Internal or External) configured in Interrupt mode with NVIC configured
|
|
(++) WFE entry mode, Any EXTI Line (Internal or External) configured in Event mode.
|
|
|
|
*** Standby mode ***
|
|
====================
|
|
[..]
|
|
The Standby mode allows to achieve the lowest power consumption. It is based on the
|
|
Cortex-M3 deepsleep mode, with the voltage regulator disabled. The 1.8 V domain is
|
|
consequently powered off. The PLL, the HSI oscillator and the HSE oscillator are also
|
|
switched off. SRAM and register contents are lost except for registers in the Backup domain
|
|
and Standby circuitry
|
|
|
|
(+) Entry:
|
|
(++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
|
|
(+) Exit:
|
|
(++) WKUP pin rising edge, RTC alarm event rising edge, external Reset in
|
|
NRSTpin, IWDG Reset
|
|
|
|
*** Auto-wakeup (AWU) from low-power mode ***
|
|
=============================================
|
|
[..]
|
|
|
|
(+) The MCU can be woken up from low-power mode by an RTC Alarm event,
|
|
without depending on an external interrupt (Auto-wakeup mode).
|
|
|
|
(+) RTC auto-wakeup (AWU) from the Stop and Standby modes
|
|
|
|
(++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
|
|
configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
|
|
|
|
*** PWR Workarounds linked to Silicon Limitation ***
|
|
====================================================
|
|
[..]
|
|
Below the list of all silicon limitations known on STM32F1xx prouct.
|
|
|
|
(#)Workarounds Implemented inside PWR HAL Driver
|
|
(##)Debugging Stop mode with WFE entry - overloaded the WFE by an internal function
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
|
|
* @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration
|
|
* information for the PVD.
|
|
* @note Refer to the electrical characteristics of your device datasheet for
|
|
* more details about the voltage threshold corresponding to each
|
|
* detection level.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
|
|
assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
|
|
|
|
/* Set PLS[7:5] bits according to PVDLevel value */
|
|
MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
|
|
|
|
/* Clear any previous config. Keep it clear if no event or IT mode is selected */
|
|
__HAL_PWR_PVD_EXTI_DISABLE_EVENT();
|
|
__HAL_PWR_PVD_EXTI_DISABLE_IT();
|
|
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
|
|
__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
|
|
|
|
/* Configure interrupt mode */
|
|
if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
|
|
{
|
|
__HAL_PWR_PVD_EXTI_ENABLE_IT();
|
|
}
|
|
|
|
/* Configure event mode */
|
|
if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
|
|
{
|
|
__HAL_PWR_PVD_EXTI_ENABLE_EVENT();
|
|
}
|
|
|
|
/* Configure the edge */
|
|
if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
|
|
{
|
|
__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
|
|
}
|
|
|
|
if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
|
|
{
|
|
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Enables the Power Voltage Detector(PVD).
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnablePVD(void)
|
|
{
|
|
/* Enable the power voltage detector */
|
|
*(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables the Power Voltage Detector(PVD).
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_DisablePVD(void)
|
|
{
|
|
/* Disable the power voltage detector */
|
|
*(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE;
|
|
}
|
|
|
|
/**
|
|
* @brief Enables the WakeUp PINx functionality.
|
|
* @param WakeUpPinx: Specifies the Power Wake-Up pin to enable.
|
|
* This parameter can be one of the following values:
|
|
* @arg PWR_WAKEUP_PIN1
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
|
|
{
|
|
/* Check the parameter */
|
|
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
|
|
/* Enable the EWUPx pin */
|
|
*(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)ENABLE;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables the WakeUp PINx functionality.
|
|
* @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
|
|
* This parameter can be one of the following values:
|
|
* @arg PWR_WAKEUP_PIN1
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
|
|
{
|
|
/* Check the parameter */
|
|
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
|
|
/* Disable the EWUPx pin */
|
|
*(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)DISABLE;
|
|
}
|
|
|
|
/**
|
|
* @brief Enters Sleep mode.
|
|
* @note In Sleep mode, all I/O pins keep the same state as in Run mode.
|
|
* @param Regulator: Regulator state as no effect in SLEEP mode - allows to support portability from legacy software
|
|
* @param SLEEPEntry: Specifies if SLEEP mode is entered with WFI or WFE instruction.
|
|
* When WFI entry is used, tick interrupt have to be disabled if not desired as
|
|
* the interrupt wake up source.
|
|
* This parameter can be one of the following values:
|
|
* @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
|
|
* @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
|
|
{
|
|
/* Check the parameters */
|
|
/* No check on Regulator because parameter not used in SLEEP mode */
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(Regulator);
|
|
|
|
assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
|
|
|
|
/* Clear SLEEPDEEP bit of Cortex System Control Register */
|
|
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
|
|
|
/* Select SLEEP mode entry -------------------------------------------------*/
|
|
if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
|
|
{
|
|
/* Request Wait For Interrupt */
|
|
__WFI();
|
|
}
|
|
else
|
|
{
|
|
/* Request Wait For Event */
|
|
__SEV();
|
|
__WFE();
|
|
__WFE();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Enters Stop mode.
|
|
* @note In Stop mode, all I/O pins keep the same state as in Run mode.
|
|
* @note When exiting Stop mode by using an interrupt or a wakeup event,
|
|
* HSI RC oscillator is selected as system clock.
|
|
* @note When the voltage regulator operates in low power mode, an additional
|
|
* startup delay is incurred when waking up from Stop mode.
|
|
* By keeping the internal regulator ON during Stop mode, the consumption
|
|
* is higher although the startup time is reduced.
|
|
* @param Regulator: Specifies the regulator state in Stop mode.
|
|
* This parameter can be one of the following values:
|
|
* @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
|
|
* @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
|
|
* @param STOPEntry: Specifies if Stop mode in entered with WFI or WFE instruction.
|
|
* This parameter can be one of the following values:
|
|
* @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
|
|
* @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_PWR_REGULATOR(Regulator));
|
|
assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
|
|
|
|
/* Clear PDDS bit in PWR register to specify entering in STOP mode when CPU enter in Deepsleep */
|
|
CLEAR_BIT(PWR->CR, PWR_CR_PDDS);
|
|
|
|
/* Select the voltage regulator mode by setting LPDS bit in PWR register according to Regulator parameter value */
|
|
MODIFY_REG(PWR->CR, PWR_CR_LPDS, Regulator);
|
|
|
|
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
|
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
|
|
|
/* Select Stop mode entry --------------------------------------------------*/
|
|
if(STOPEntry == PWR_STOPENTRY_WFI)
|
|
{
|
|
/* Request Wait For Interrupt */
|
|
__WFI();
|
|
}
|
|
else
|
|
{
|
|
/* Request Wait For Event */
|
|
__SEV();
|
|
PWR_OverloadWfe(); /* WFE redefine locally */
|
|
PWR_OverloadWfe(); /* WFE redefine locally */
|
|
}
|
|
/* Reset SLEEPDEEP bit of Cortex System Control Register */
|
|
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
|
}
|
|
|
|
/**
|
|
* @brief Enters Standby mode.
|
|
* @note In Standby mode, all I/O pins are high impedance except for:
|
|
* - Reset pad (still available)
|
|
* - TAMPER pin if configured for tamper or calibration out.
|
|
* - WKUP pin (PA0) if enabled.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnterSTANDBYMode(void)
|
|
{
|
|
/* Select Standby mode */
|
|
SET_BIT(PWR->CR, PWR_CR_PDDS);
|
|
|
|
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
|
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
|
|
|
/* This option is used to ensure that store operations are completed */
|
|
#if defined ( __CC_ARM)
|
|
__force_stores();
|
|
#endif
|
|
/* Request Wait For Interrupt */
|
|
__WFI();
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
|
|
* @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
|
|
* re-enters SLEEP mode when an interruption handling is over.
|
|
* Setting this bit is useful when the processor is expected to run only on
|
|
* interruptions handling.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnableSleepOnExit(void)
|
|
{
|
|
/* Set SLEEPONEXIT bit of Cortex System Control Register */
|
|
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
|
|
* @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
|
|
* re-enters SLEEP mode when an interruption handling is over.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_DisableSleepOnExit(void)
|
|
{
|
|
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
|
|
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Enables CORTEX M3 SEVONPEND bit.
|
|
* @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
|
|
* WFE to wake up when an interrupt moves from inactive to pended.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnableSEVOnPend(void)
|
|
{
|
|
/* Set SEVONPEND bit of Cortex System Control Register */
|
|
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Disables CORTEX M3 SEVONPEND bit.
|
|
* @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
|
|
* WFE to wake up when an interrupt moves from inactive to pended.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_DisableSEVOnPend(void)
|
|
{
|
|
/* Clear SEVONPEND bit of Cortex System Control Register */
|
|
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* @brief This function handles the PWR PVD interrupt request.
|
|
* @note This API should be called under the PVD_IRQHandler().
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_PVD_IRQHandler(void)
|
|
{
|
|
/* Check PWR exti flag */
|
|
if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
|
|
{
|
|
/* PWR PVD interrupt user callback */
|
|
HAL_PWR_PVDCallback();
|
|
|
|
/* Clear PWR Exti pending bit */
|
|
__HAL_PWR_PVD_EXTI_CLEAR_FLAG();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief PWR PVD interrupt callback
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_PWR_PVDCallback(void)
|
|
{
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_PWR_PVDCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* HAL_PWR_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|