interfisch
/
hoverboard-firmware-hack-serial-esc
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

now you set battery alert levels in volt per cell and set number of cells. less annoying battery alert beeps. small cleanup.

This commit is contained in:
larsm 2018-07-21 17:37:02 +02:00
parent dd5a128199
commit 3d0ed7e9c0
3 changed files with 737 additions and 681 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Inc/config.h
View File

@ -12,9 +12,10 @@
#define BAT_CALIB_REAL_VOLTAGE 42.0 // input voltage measured by multimeter #define BAT_CALIB_REAL_VOLTAGE 42.0 // input voltage measured by multimeter
#define BAT_CALIB_ADC 1667 // adc-value measured by mainboard (value nr 4 on UART debug output) #define BAT_CALIB_ADC 1667 // adc-value measured by mainboard (value nr 4 on UART debug output)
#define BAT_LOW_LVL1 36.0 // gently beeps at this voltage level. ~3.6V/cell #define BAT_NUMBER_OF_CELLS 12 // normal Hoverboard battery: 10s
#define BAT_LOW_LVL2 33.0 // your battery is almost empty. Charge now! ~3.3V/cell #define BAT_LOW_LVL1 3.6 // gently beeps at this voltage level. [V/cell]
#define BAT_LOW_DEAD 31.0 // undervoltage lockout. ~3.1V/cell #define BAT_LOW_LVL2 3.5 // your battery is almost empty. Charge now! [V/cell]
#define BAT_LOW_DEAD 3.37 // undervoltage lockout. [V/cell]
// ################################################################################ // ################################################################################

18
Src/main.c
View File

@ -221,11 +221,14 @@ int main(void) {
setScopeChannel(5, (int)(batteryVoltage * 100.0f)); // for verifying battery voltage calibration setScopeChannel(5, (int)(batteryVoltage * 100.0f)); // for verifying battery voltage calibration
// setScopeChannel(6, (int)); // setScopeChannel(6, (int));
// setScopeChannel(7, (int)); // setScopeChannel(7, (int));
consoleScope();
#ifdef ADDITIONAL_CODE #ifdef ADDITIONAL_CODE
ADDITIONAL_CODE; ADDITIONAL_CODE;
#endif #endif
// ####### SET OUTPUTS ####### // ####### SET OUTPUTS #######
if ((speedL < lastSpeedL + 50 && speedL > lastSpeedL - 50) && (speedR < lastSpeedR + 50 && speedR > lastSpeedR - 50) && timeout < TIMEOUT) { if ((speedL < lastSpeedL + 50 && speedL > lastSpeedL - 50) && (speedR < lastSpeedR + 50 && speedR > lastSpeedR - 50) && timeout < TIMEOUT) {
#ifdef INVERT_R_DIRECTION #ifdef INVERT_R_DIRECTION
@ -243,9 +246,8 @@ int main(void) {
lastSpeedL = speedL; lastSpeedL = speedL;
lastSpeedR = speedR; lastSpeedR = speedR;
// ####### LOG TO CONSOLE #######
consoleScope();
// ####### POWEROFF BY POWER-BUTTON #######
if (HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) { if (HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) {
enable = 0; enable = 0;
while (HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) {} while (HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) {}
@ -259,13 +261,15 @@ int main(void) {
while(1) {} while(1) {}
} }
if (batteryVoltage < BAT_LOW_LVL1 && batteryVoltage > BAT_LOW_LVL2) {
// ####### BATTERY VOLTAGE #######
if (batteryVoltage < ((float)BAT_LOW_LVL1 * (float)BAT_NUMBER_OF_CELLS) && batteryVoltage > ((float)BAT_LOW_LVL2 * (float)BAT_NUMBER_OF_CELLS)) {
buzzerFreq = 5; buzzerFreq = 5;
buzzerPattern = 8; buzzerPattern = 42;
} else if (batteryVoltage < BAT_LOW_LVL2 && batteryVoltage > BAT_LOW_DEAD) { } else if (batteryVoltage < ((float)BAT_LOW_LVL2 * (float)BAT_NUMBER_OF_CELLS) && batteryVoltage > ((float)BAT_LOW_DEAD * (float)BAT_NUMBER_OF_CELLS)) {
buzzerFreq = 5; buzzerFreq = 5;
buzzerPattern = 1; buzzerPattern = 6;
} else if (batteryVoltage < BAT_LOW_DEAD) { } else if (batteryVoltage < ((float)BAT_LOW_DEAD * (float)BAT_NUMBER_OF_CELLS)) {
buzzerPattern = 0; buzzerPattern = 0;
enable = 0; enable = 0;
for (int i = 0; i < 8; i++) { for (int i = 0; i < 8; i++) {

1393
build/hover.hex
View File

File diff suppressed because it is too large Load Diff