hoverboard-firmware-hack-serial-esc/Src/comms.c

#include "stm32f1xx_hal.h"
#include "defines.h"
#include "setup.h"
#include "config.h"
#include "stdio.h"
#include "string.h"

UART_HandleTypeDef huart2;

#ifdef DEBUG_SERIAL_USART3
#define UART_DMA_CHANNEL DMA1_Channel2
#endif

#ifdef DEBUG_SERIAL_USART2
#define UART_DMA_CHANNEL DMA1_Channel7
#endif


volatile uint8_t uart_buf[100];
volatile int16_t ch_buf[8];
//volatile char char_buf[300];

void setScopeChannel(uint8_t ch, int16_t val) {
  ch_buf[ch] = val;
}

void consoleScope() {
  #if defined DEBUG_SERIAL_SERVOTERM && defined DEBUG_SERIAL_USART3
    uart_buf[0] = 0xff;
    uart_buf[1] = CLAMP(ch_buf[0]+127, 0, 255);
    uart_buf[2] = CLAMP(ch_buf[1]+127, 0, 255);
    uart_buf[3] = CLAMP(ch_buf[2]+127, 0, 255);
    uart_buf[4] = CLAMP(ch_buf[3]+127, 0, 255);
    uart_buf[5] = CLAMP(ch_buf[4]+127, 0, 255);
    uart_buf[6] = CLAMP(ch_buf[5]+127, 0, 255);
    uart_buf[7] = CLAMP(ch_buf[6]+127, 0, 255);
    uart_buf[8] = CLAMP(ch_buf[7]+127, 0, 255);
    uart_buf[9] = '\n';

    if(UART_DMA_CHANNEL->CNDTR == 0) {
      UART_DMA_CHANNEL->CCR &= ~DMA_CCR_EN;
      UART_DMA_CHANNEL->CNDTR = 10;
      UART_DMA_CHANNEL->CMAR  = (uint32_t)uart_buf;
      UART_DMA_CHANNEL->CCR |= DMA_CCR_EN;
    }
  #endif

  #if defined DEBUG_SERIAL_ASCII && defined DEBUG_SERIAL_USART3
    memset(uart_buf, 0, sizeof(uart_buf));
    sprintf(uart_buf, "1:%i 2:%i 3:%i 4:%i 5:%i 6:%i 7:%i 8:%i\r\n", ch_buf[0], ch_buf[1], ch_buf[2], ch_buf[3], ch_buf[4], ch_buf[5], ch_buf[6], ch_buf[7]);

    if(UART_DMA_CHANNEL->CNDTR == 0) {
      UART_DMA_CHANNEL->CCR &= ~DMA_CCR_EN;
      UART_DMA_CHANNEL->CNDTR = strlen(uart_buf);
      UART_DMA_CHANNEL->CMAR  = (uint32_t)uart_buf;
      UART_DMA_CHANNEL->CCR |= DMA_CCR_EN;
    }
  #endif
}

void consoleLog(char *message)
{
    HAL_UART_Transmit_DMA(&huart2, (uint8_t *)message, strlen(message));
}