Minor updates

- fixed all warnings for VARIANT_NUNCHUCK and VARIANT_PPM
- changed the variant order: the basic Variants on top, more application specific in the bottom

Inc/config.h

@@ -8,10 +8,10 @@
 #if !defined(PLATFORMIO)
   //#define VARIANT_ADC         // Variant for control via ADC input
   //#define VARIANT_USART3      // Variant for Serial control via USART3 input
-  //#define VARIANT_HOVERCAR    // Variant for HOVERCAR build
-  //#define VARIANT_TRANSPOTTER // Variant for TRANSPOTTER build https://github.com/NiklasFauth/hoverboard-firmware-hack/wiki/Build-Instruction:-TranspOtter https://hackaday.io/project/161891-transpotter-ng
   //#define VARIANT_NUNCHUCK    // Variant for Nunchuck controlled vehicle build
   //#define VARIANT_PPM         // Variant for RC-Remote with PPM-Sum Signal
+  //#define VARIANT_HOVERCAR    // Variant for HOVERCAR build
+  //#define VARIANT_TRANSPOTTER // Variant for TRANSPOTTER build https://github.com/NiklasFauth/hoverboard-firmware-hack/wiki/Build-Instruction:-TranspOtter https://hackaday.io/project/161891-transpotter-ng
 #endif
 
 // For any particular needs, feel free to change this file according to your needs.

Inc/defines.h

@@ -174,8 +174,10 @@ void mixerFcn(int16_t rtu_speed, int16_t rtu_steer, int16_t *rty_speedR, int16_t
 void rateLimiter16(int16_t u, int16_t rate, int16_t *y);
 void multipleTapDet(int16_t u, uint32_t timeNow, MultipleTap *x);
 
-// Define I2C and Nunchuck functions
+// Define I2C, Nunchuck, PPM functions
 void I2C_Init(void);
 void Nunchuck_Init(void);
 void Nunchuck_Read(void);
-uint8_t Nunchuck_Ping(void);
+uint8_t Nunchuck_Ping(void);
+void PPM_Init(void);
+void PPM_ISR_Callback(void);

Src/main.c

@@ -71,7 +71,8 @@ extern volatile adc_buf_t adc_buffer;
   LCD_PCF8574_HandleTypeDef lcd;
 #endif
 extern I2C_HandleTypeDef hi2c2;
-#ifndef VARIANT_TRANSPOTTER
+#if defined(CONTROL_SERIAL_USART2) || defined(FEEDBACK_SERIAL_USART2) || defined(DEBUG_SERIAL_USART2) \
+ || defined(CONTROL_SERIAL_USART3) || defined(FEEDBACK_SERIAL_USART3) || defined(DEBUG_SERIAL_USART3) 
   extern UART_HandleTypeDef huart2;
   extern UART_HandleTypeDef huart3;
   static UART_HandleTypeDef huart;
@@ -454,7 +455,8 @@ int main(void) {
       cmd1 = CLAMP((ppm_captured_value[0] - INPUT_MID) * 2, INPUT_MIN, INPUT_MAX);
       cmd2 = CLAMP((ppm_captured_value[1] - INPUT_MID) * 2, INPUT_MIN, INPUT_MAX);
       button1 = ppm_captured_value[5] > INPUT_MID;
-      float scale = ppm_captured_value[2] / 1000.0f;
+      button2 = 0;
+      // float scale = ppm_captured_value[2] / 1000.0f;     // not used for now, uncomment if needed
     #endif
 
     #ifdef CONTROL_ADC

Src/stm32f1xx_it.c

@@ -34,6 +34,7 @@
 #include "stm32f1xx_hal.h"
 #include "stm32f1xx.h"
 #include "stm32f1xx_it.h"
+#include "defines.h"
 #include "config.h"
 
 extern DMA_HandleTypeDef hdma_i2c2_rx;

platformio.ini

@@ -11,10 +11,12 @@ src_dir     = Src
 ;
 ;default_envs = VARIANT_ADC         ; Variant for control via ADC input
 ;default_envs = VARIANT_USART3      ; Variant for Serial control via USART3 input
-;default_envs = VARIANT_HOVERCAR    ; Variant for HOVERCAR build
-;default_envs = VARIANT_TRANSPOTTER ; Variant for TRANSPOTTER build https://github.com/NiklasFauth/hoverboard-firmware-hack/wiki/Build-Instruction:-TranspOtter https://hackaday.io/project/161891-transpotter-ng
 ;default_envs = VARIANT_NUNCHUCK    ; Variant for Nunchuck controlled vehicle build
 ;default_envs = VARIANT_PPM         ; Variant for RC-Remotes with PPM-Sum signal
+;default_envs = VARIANT_HOVERCAR    ; Variant for HOVERCAR build
+;default_envs = VARIANT_TRANSPOTTER ; Variant for TRANSPOTTER build https://github.com/NiklasFauth/hoverboard-firmware-hack/wiki/Build-Instruction:-TranspOtter https://hackaday.io/project/161891-transpotter-ng
+;================================================================
+
 ;================================================================
 
 [env:VARIANT_ADC]
@@ -40,6 +42,8 @@ build_flags =
     -D VARIANT_ADC
     -D PALTFORMIO
 
+;================================================================
+
 [env:VARIANT_USART3]
 platform        = ststm32
 framework       = stm32cube
@@ -63,6 +67,50 @@ build_flags =
     -D VARIANT_USART3
     -D PALTFORMIO
 
+;================================================================
+
+[env:VARIANT_NUNCHUCK]
+platform        = ststm32
+framework       = stm32cube
+board           = genericSTM32F103RC
+debug_tool      = stlink
+upload_protocol = stlink
+
+build_flags =
+    -I${PROJECT_DIR}/inc/
+    -DUSE_HAL_DRIVER
+    -DSTM32F103xE
+    -Wl,-T./STM32F103RCTx_FLASH.ld
+    -Wl,-lc
+    -Wl,-lm
+    -g -ggdb        ; to generate correctly the 'firmware.elf' for STM STUDIO vizualization
+#    -Wl,-lnosys
+    -D VARIANT_NUNCHUCK
+    -D PALTFORMIO
+
+;================================================================
+
+[env:VARIANT_PPM]
+platform        = ststm32
+framework       = stm32cube
+board           = genericSTM32F103RC
+debug_tool      = stlink
+upload_protocol = stlink
+
+build_flags =
+    -I${PROJECT_DIR}/inc/
+    -DUSE_HAL_DRIVER
+    -DSTM32F103xE
+    -Wl,-T./STM32F103RCTx_FLASH.ld
+    -Wl,-lc
+    -Wl,-lm
+    -g -ggdb        ; to generate correctly the 'firmware.elf' for STM STUDIO vizualization
+#    -Wl,-lnosys
+    -D VARIANT_PPM
+    -D PALTFORMIO
+
+;================================================================
+
 [env:VARIANT_HOVERCAR]
 platform        = ststm32
 framework       = stm32cube
@@ -86,6 +134,8 @@ build_flags =
     -D VARIANT_HOVERCAR
     -D PALTFORMIO
 
+;================================================================
+
 [env:VARIANT_TRANSPOTTER]
 platform        = ststm32
 framework       = stm32cube
@@ -104,41 +154,5 @@ build_flags =
 #    -Wl,-lnosys
     -D VARIANT_TRANSPOTTER
     -D PALTFORMIO
-
+    
-[env:VARIANT_NUNCHUCK]
+;================================================================
-platform        = ststm32
-framework       = stm32cube
-board           = genericSTM32F103RC
-debug_tool      = stlink
-upload_protocol = stlink
-
-build_flags =
-    -I${PROJECT_DIR}/inc/
-    -DUSE_HAL_DRIVER
-    -DSTM32F103xE
-    -Wl,-T./STM32F103RCTx_FLASH.ld
-    -Wl,-lc
-    -Wl,-lm
-    -g -ggdb        ; to generate correctly the 'firmware.elf' for STM STUDIO vizualization
-#    -Wl,-lnosys
-    -D VARIANT_NUNCHUCK
-    -D PALTFORMIO
-
-[env:VARIANT_PPM]
-platform        = ststm32
-framework       = stm32cube
-board           = genericSTM32F103RC
-debug_tool      = stlink
-upload_protocol = stlink
-
-build_flags =
-    -I${PROJECT_DIR}/inc/
-    -DUSE_HAL_DRIVER
-    -DSTM32F103xE
-    -Wl,-T./STM32F103RCTx_FLASH.ld
-    -Wl,-lc
-    -Wl,-lm
-    -g -ggdb        ; to generate correctly the 'firmware.elf' for STM STUDIO vizualization
-#    -Wl,-lnosys
-    -D VARIANT_PPM
-    -D PALTFORMIO