494 lines
19 KiB
C
494 lines
19 KiB
C
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file stm32f1xx_hal_i2s.h
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @version V1.1.1
|
||
|
|
* @date 12-May-2017
|
||
|
|
* @brief Header file of I2S HAL module.
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
* are permitted provided that the following conditions are met:
|
||
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer in the documentation
|
||
|
|
* and/or other materials provided with the distribution.
|
||
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||
|
|
* may be used to endorse or promote products derived from this software
|
||
|
|
* without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||
|
|
#ifndef __STM32F1xx_HAL_I2S_H
|
||
|
|
#define __STM32F1xx_HAL_I2S_H
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
|
||
|
|
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "stm32f1xx_hal_def.h"
|
||
|
|
|
||
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup I2S
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported types ------------------------------------------------------------*/
|
||
|
|
/** @defgroup I2S_Exported_Types I2S Exported Types
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief I2S Init structure definition
|
||
|
|
*/
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
uint32_t Mode; /*!< Specifies the I2S operating mode.
|
||
|
|
This parameter can be a value of @ref I2S_Mode */
|
||
|
|
|
||
|
|
uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
|
||
|
|
This parameter can be a value of @ref I2S_Standard */
|
||
|
|
|
||
|
|
uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
|
||
|
|
This parameter can be a value of @ref I2S_Data_Format */
|
||
|
|
|
||
|
|
uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
|
||
|
|
This parameter can be a value of @ref I2S_MCLK_Output */
|
||
|
|
|
||
|
|
uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
|
||
|
|
This parameter can be a value of @ref I2S_Audio_Frequency */
|
||
|
|
|
||
|
|
uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
|
||
|
|
This parameter can be a value of @ref I2S_Clock_Polarity */
|
||
|
|
}I2S_InitTypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief HAL State structures definition
|
||
|
|
*/
|
||
|
|
typedef enum
|
||
|
|
{
|
||
|
|
HAL_I2S_STATE_RESET = 0x00U, /*!< I2S not yet initialized or disabled */
|
||
|
|
HAL_I2S_STATE_READY = 0x01U, /*!< I2S initialized and ready for use */
|
||
|
|
HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */
|
||
|
|
HAL_I2S_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */
|
||
|
|
HAL_I2S_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */
|
||
|
|
HAL_I2S_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */
|
||
|
|
HAL_I2S_STATE_TIMEOUT = 0x06U, /*!< I2S timeout state */
|
||
|
|
HAL_I2S_STATE_ERROR = 0x07U /*!< I2S error state */
|
||
|
|
|
||
|
|
}HAL_I2S_StateTypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief I2S handle Structure definition
|
||
|
|
*/
|
||
|
|
typedef struct __I2S_HandleTypeDef
|
||
|
|
{
|
||
|
|
SPI_TypeDef *Instance; /*!< I2S registers base address */
|
||
|
|
|
||
|
|
I2S_InitTypeDef Init; /*!< I2S communication parameters */
|
||
|
|
|
||
|
|
uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */
|
||
|
|
|
||
|
|
__IO uint16_t TxXferSize; /*!< I2S Tx transfer size */
|
||
|
|
|
||
|
|
__IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */
|
||
|
|
|
||
|
|
uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */
|
||
|
|
|
||
|
|
__IO uint16_t RxXferSize; /*!< I2S Rx transfer size */
|
||
|
|
|
||
|
|
__IO uint16_t RxXferCount; /*!< I2S Rx transfer counter
|
||
|
|
(This field is initialized at the
|
||
|
|
same value as transfer size at the
|
||
|
|
beginning of the transfer and
|
||
|
|
decremented when a sample is received
|
||
|
|
NbSamplesReceived = RxBufferSize-RxBufferCount) */
|
||
|
|
|
||
|
|
void (*IrqHandlerISR) (struct __I2S_HandleTypeDef *hi2s); /*!< I2S function pointer on IrqHandler */
|
||
|
|
|
||
|
|
DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */
|
||
|
|
|
||
|
|
DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */
|
||
|
|
|
||
|
|
__IO HAL_LockTypeDef Lock; /*!< I2S locking object */
|
||
|
|
|
||
|
|
__IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */
|
||
|
|
|
||
|
|
__IO uint32_t ErrorCode; /*!< I2S Error code
|
||
|
|
This parameter can be a value of @ref I2S_ErrorCode */
|
||
|
|
|
||
|
|
}I2S_HandleTypeDef;
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported constants --------------------------------------------------------*/
|
||
|
|
/** @defgroup I2S_Exported_Constants I2S Exported Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/**
|
||
|
|
* @defgroup I2S_ErrorCode I2S Error Code
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define HAL_I2S_ERROR_NONE 0x00000000U /*!< No error */
|
||
|
|
#define HAL_I2S_ERROR_TIMEOUT 0x00000001U /*!< Timeout error */
|
||
|
|
#define HAL_I2S_ERROR_OVR 0x00000002U /*!< OVR error */
|
||
|
|
#define HAL_I2S_ERROR_UDR 0x00000004U /*!< UDR error */
|
||
|
|
#define HAL_I2S_ERROR_DMA 0x00000008U /*!< DMA transfer error */
|
||
|
|
#define HAL_I2S_ERROR_PRESCALER 0x00000010U /*!< Prescaler Calculation error */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup I2S_Mode I2S Mode
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define I2S_MODE_SLAVE_TX 0x00000000U
|
||
|
|
#define I2S_MODE_SLAVE_RX ((uint32_t)SPI_I2SCFGR_I2SCFG_0)
|
||
|
|
#define I2S_MODE_MASTER_TX ((uint32_t)SPI_I2SCFGR_I2SCFG_1)
|
||
|
|
#define I2S_MODE_MASTER_RX ((uint32_t)(SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1))
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup I2S_Standard I2S Standard
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define I2S_STANDARD_PHILIPS 0x00000000U
|
||
|
|
#define I2S_STANDARD_MSB ((uint32_t)SPI_I2SCFGR_I2SSTD_0)
|
||
|
|
#define I2S_STANDARD_LSB ((uint32_t)SPI_I2SCFGR_I2SSTD_1)
|
||
|
|
#define I2S_STANDARD_PCM_SHORT ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1))
|
||
|
|
#define I2S_STANDARD_PCM_LONG ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC))
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup I2S_Data_Format I2S Data Format
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define I2S_DATAFORMAT_16B 0x00000000U
|
||
|
|
#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)SPI_I2SCFGR_CHLEN)
|
||
|
|
#define I2S_DATAFORMAT_24B ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0))
|
||
|
|
#define I2S_DATAFORMAT_32B ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1))
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup I2S_MCLK_Output I2S Mclk Output
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE)
|
||
|
|
#define I2S_MCLKOUTPUT_DISABLE 0x00000000U
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define I2S_AUDIOFREQ_192K 192000U
|
||
|
|
#define I2S_AUDIOFREQ_96K 96000U
|
||
|
|
#define I2S_AUDIOFREQ_48K 48000U
|
||
|
|
#define I2S_AUDIOFREQ_44K 44100U
|
||
|
|
#define I2S_AUDIOFREQ_32K 32000U
|
||
|
|
#define I2S_AUDIOFREQ_22K 22050U
|
||
|
|
#define I2S_AUDIOFREQ_16K 16000U
|
||
|
|
#define I2S_AUDIOFREQ_11K 11025U
|
||
|
|
#define I2S_AUDIOFREQ_8K 8000U
|
||
|
|
#define I2S_AUDIOFREQ_DEFAULT 2U
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define I2S_CPOL_LOW 0x00000000U
|
||
|
|
#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define I2S_IT_TXE SPI_CR2_TXEIE
|
||
|
|
#define I2S_IT_RXNE SPI_CR2_RXNEIE
|
||
|
|
#define I2S_IT_ERR SPI_CR2_ERRIE
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup I2S_Flags_Definition I2S Flags Definition
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define I2S_FLAG_TXE SPI_SR_TXE
|
||
|
|
#define I2S_FLAG_RXNE SPI_SR_RXNE
|
||
|
|
|
||
|
|
#define I2S_FLAG_UDR SPI_SR_UDR
|
||
|
|
#define I2S_FLAG_OVR SPI_SR_OVR
|
||
|
|
#define I2S_FLAG_FRE SPI_SR_FRE
|
||
|
|
|
||
|
|
#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
|
||
|
|
#define I2S_FLAG_BSY SPI_SR_BSY
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported macro ------------------------------------------------------------*/
|
||
|
|
/** @defgroup I2S_Exported_Macros I2S Exported Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @brief Reset I2S handle state
|
||
|
|
* @param __HANDLE__: specifies the I2S Handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
|
||
|
|
|
||
|
|
/** @brief Enable the specified SPI peripheral (in I2S mode).
|
||
|
|
* @param __HANDLE__: specifies the I2S Handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))
|
||
|
|
|
||
|
|
/** @brief Disable the specified SPI peripheral (in I2S mode).
|
||
|
|
* @param __HANDLE__: specifies the I2S Handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))
|
||
|
|
|
||
|
|
/** @brief Enable the specified I2S interrupts.
|
||
|
|
* @param __HANDLE__: specifies the I2S Handle.
|
||
|
|
* @param __INTERRUPT__: specifies the interrupt source to enable or disable.
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg I2S_IT_TXE: Tx buffer empty interrupt enable
|
||
|
|
* @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
|
||
|
|
* @arg I2S_IT_ERR: Error interrupt enable
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))
|
||
|
|
|
||
|
|
/** @brief Disable the specified I2S interrupts.
|
||
|
|
* @param __HANDLE__: specifies the I2S Handle.
|
||
|
|
* @param __INTERRUPT__: specifies the interrupt source to enable or disable.
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg I2S_IT_TXE: Tx buffer empty interrupt enable
|
||
|
|
* @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
|
||
|
|
* @arg I2S_IT_ERR: Error interrupt enable
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))
|
||
|
|
|
||
|
|
/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
|
||
|
|
* @param __HANDLE__: specifies the I2S Handle.
|
||
|
|
* This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
|
||
|
|
* @param __INTERRUPT__: specifies the I2S interrupt source to check.
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg I2S_IT_TXE: Tx buffer empty interrupt enable
|
||
|
|
* @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
|
||
|
|
* @arg I2S_IT_ERR: Error interrupt enable
|
||
|
|
* @retval The new state of __IT__ (TRUE or FALSE).
|
||
|
|
*/
|
||
|
|
#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
||
|
|
|
||
|
|
/** @brief Checks whether the specified I2S flag is set or not.
|
||
|
|
* @param __HANDLE__: specifies the I2S Handle.
|
||
|
|
* @param __FLAG__: specifies the flag to check.
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg I2S_FLAG_RXNE: Receive buffer not empty flag
|
||
|
|
* @arg I2S_FLAG_TXE: Transmit buffer empty flag
|
||
|
|
* @arg I2S_FLAG_UDR: Underrun flag
|
||
|
|
* @arg I2S_FLAG_OVR: Overrun flag
|
||
|
|
* @arg I2S_FLAG_FRE: Frame error flag
|
||
|
|
* @arg I2S_FLAG_CHSIDE: Channel Side flag
|
||
|
|
* @arg I2S_FLAG_BSY: Busy flag
|
||
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||
|
|
*/
|
||
|
|
#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
|
||
|
|
|
||
|
|
/** @brief Clears the I2S OVR pending flag.
|
||
|
|
* @param __HANDLE__: specifies the I2S Handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) \
|
||
|
|
do{ \
|
||
|
|
__IO uint32_t tmpreg = 0x00U; \
|
||
|
|
tmpreg = (__HANDLE__)->Instance->DR; \
|
||
|
|
tmpreg = (__HANDLE__)->Instance->SR; \
|
||
|
|
UNUSED(tmpreg); \
|
||
|
|
} while(0U)
|
||
|
|
|
||
|
|
/** @brief Clears the I2S UDR pending flag.
|
||
|
|
* @param __HANDLE__: specifies the I2S Handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) \
|
||
|
|
do{ \
|
||
|
|
__IO uint32_t tmpreg = 0x00U; \
|
||
|
|
tmpreg = (__HANDLE__)->Instance->SR; \
|
||
|
|
UNUSED(tmpreg); \
|
||
|
|
} while(0U)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported functions --------------------------------------------------------*/
|
||
|
|
/** @addtogroup I2S_Exported_Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup I2S_Exported_Functions_Group1
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* Initialization/de-initialization functions ********************************/
|
||
|
|
HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
|
||
|
|
HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
|
||
|
|
void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
|
||
|
|
void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup I2S_Exported_Functions_Group2
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* I/O operation functions ***************************************************/
|
||
|
|
/* Blocking mode: Polling */
|
||
|
|
HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
|
||
|
|
HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
|
||
|
|
|
||
|
|
/* Non-Blocking mode: Interrupt */
|
||
|
|
HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
|
||
|
|
HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
|
||
|
|
void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
|
||
|
|
|
||
|
|
/* Non-Blocking mode: DMA */
|
||
|
|
HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
|
||
|
|
HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
|
||
|
|
|
||
|
|
HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
|
||
|
|
HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
|
||
|
|
HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
|
||
|
|
|
||
|
|
/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
|
||
|
|
void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
|
||
|
|
void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
|
||
|
|
void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
|
||
|
|
void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
|
||
|
|
void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup I2S_Exported_Functions_Group3
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* Peripheral Control and State functions ************************************/
|
||
|
|
HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
|
||
|
|
uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private types -------------------------------------------------------------*/
|
||
|
|
/* Private variables ---------------------------------------------------------*/
|
||
|
|
/* Private constants ---------------------------------------------------------*/
|
||
|
|
/** @defgroup I2S_Private_Constants I2S Private Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private macros ------------------------------------------------------------*/
|
||
|
|
/** @defgroup I2S_Private_Macros I2S Private Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \
|
||
|
|
((MODE) == I2S_MODE_SLAVE_RX) || \
|
||
|
|
((MODE) == I2S_MODE_MASTER_TX) || \
|
||
|
|
((MODE) == I2S_MODE_MASTER_RX))
|
||
|
|
|
||
|
|
#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \
|
||
|
|
((STANDARD) == I2S_STANDARD_MSB) || \
|
||
|
|
((STANDARD) == I2S_STANDARD_LSB) || \
|
||
|
|
((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
|
||
|
|
((STANDARD) == I2S_STANDARD_PCM_LONG))
|
||
|
|
|
||
|
|
#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \
|
||
|
|
((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
|
||
|
|
((FORMAT) == I2S_DATAFORMAT_24B) || \
|
||
|
|
((FORMAT) == I2S_DATAFORMAT_32B))
|
||
|
|
|
||
|
|
#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
|
||
|
|
((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
|
||
|
|
|
||
|
|
#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
|
||
|
|
((FREQ) <= I2S_AUDIOFREQ_192K)) || \
|
||
|
|
((FREQ) == I2S_AUDIOFREQ_DEFAULT))
|
||
|
|
|
||
|
|
#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
|
||
|
|
((CPOL) == I2S_CPOL_HIGH))
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private Fonctions ---------------------------------------------------------*/
|
||
|
|
/** @defgroup I2S_Private_Functions I2S Private Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* Private functions are defined in stm32f1xx_hal_i2s.c file */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* __STM32F1xx_HAL_I2S_H */
|
||
|
|
|
||
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|