diff --git a/flipcontrol_esp32/include/flipdot.h b/flipcontrol_esp32/include/flipdot.h
index 244185b..0f33272 100644
--- a/flipcontrol_esp32/include/flipdot.h
+++ b/flipcontrol_esp32/include/flipdot.h
@@ -62,6 +62,9 @@ private:
 
     uint8_t col[COLUMNBYTES]; //column drivers and shift registers on annax pcb
 
+    bool rowdata_msbfirst;
+    bool column_reversed;
+
 
 public:
     Flipdot();
@@ -79,6 +82,8 @@ public:
 
     void shiftDataRow();
     void shiftDataColumn();
+
+    void setDisplayMirror(bool x, bool y);
 };
 
 #endif
diff --git a/flipcontrol_esp32/include/fonts.h b/flipcontrol_esp32/include/fonts.h
new file mode 100644
index 0000000..5d7faa2
--- /dev/null
+++ b/flipcontrol_esp32/include/fonts.h
@@ -0,0 +1,107 @@
+#ifndef FONTS_H
+#define FONTS_H
+
+#include <Arduino.h>
+
+const uint8_t font_width=6;
+uint8_t font_spacing=1;
+
+const uint8_t font_offset=33;
+const uint8_t font_minecraftia[94][font_width]= {
+{95,0,0,0,0,0}, // 33 !
+{3,0,3,0,0,0}, // 34 "
+{20,127,20,127,20,0}, // 35 #
+{36,42,107,42,18,0}, // 36 $
+{67,48,8,6,97,0}, // 37 %
+{48,74,93,50,72,0}, // 38 &
+{3,0,0,0,0,0}, // 39 '
+{28,34,65,65,0,0}, // 40 (
+{65,65,34,28,0,0}, // 41 )
+{5,2,2,5,0,0}, // 42 *
+{16,16,124,16,16,0}, // 43 +
+{224,0,0,0,0,0}, // 44 ,
+{16,16,16,16,16,0}, // 45 -
+{96,0,0,0,0,0}, // 46 .
+{64,48,8,6,1,0}, // 47 /
+{62,81,73,69,62,0}, // 48 0
+{64,66,127,64,64,0}, // 49 1
+{98,81,73,73,70,0}, // 50 2
+{34,65,73,73,54,0}, // 51 3
+{24,20,18,17,127,0}, // 52 4
+{39,69,69,69,57,0}, // 53 5
+{60,74,73,73,48,0}, // 54 6
+{3,1,113,9,7,0}, // 55 7
+{54,73,73,73,54,0}, // 56 8
+{6,73,73,41,30,0}, // 57 9
+{102,0,0,0,0,0}, // 58 :
+{230,0,0,0,0,0}, // 59 ;
+{8,20,34,65,0,0}, // 60 <
+{36,36,36,36,36,0}, // 61 =
+{65,34,20,8,0,0}, // 62 >
+{2,1,81,9,6,0}, // 63 ?
+{62,65,93,93,81,94}, // 64 @
+{126,5,5,5,126,0}, // 65 A
+{127,69,69,69,58,0}, // 66 B
+{62,65,65,65,34,0}, // 67 C
+{127,65,65,65,62,0}, // 68 D
+{127,69,69,65,65,0}, // 69 E
+{127,5,5,1,1,0}, // 70 F
+{62,65,69,69,61,0}, // 71 G
+{127,4,4,4,127,0}, // 72 H
+{65,127,65,0,0,0}, // 73 I
+{32,64,64,64,63,0}, // 74 J
+{127,4,4,10,113,0}, // 75 K
+{127,64,64,64,64,0}, // 76 L
+{127,2,4,2,127,0}, // 77 M
+{127,2,4,8,127,0}, // 78 N
+{62,65,65,65,62,0}, // 79 O
+{127,5,5,5,2,0}, // 80 P
+{62,65,65,33,94,0}, // 81 Q
+{127,5,5,5,122,0}, // 82 R
+{34,69,69,69,57,0}, // 83 S
+{1,1,127,1,1,0}, // 84 T
+{63,64,64,64,63,0}, // 85 U
+{15,48,64,48,15,0}, // 86 V
+{127,32,16,32,127,0}, // 87 W
+{113,10,4,10,113,0}, // 88 X
+{1,2,124,2,1,0}, // 89 Y
+{97,81,73,69,67,0}, // 90 Z
+{127,65,65,0,0,0}, // 91 [
+{1,6,8,48,64,0}, // 92 Backslash
+{65,65,127,0,0,0}, // 93 ]
+{4,2,1,2,4,0}, // 94 ^
+{128,128,128,128,128,0}, // 95 _
+{0,1,0,0,0,0}, // 96 `
+{32,84,84,84,120,0}, // 97 a
+{127,72,68,68,56,0}, // 98 b
+{56,68,68,68,40,0}, // 99 c
+{56,68,68,72,127,0}, // 100 d
+{56,84,84,84,88,0}, // 101 e
+{4,126,5,5,0,0}, // 102 f
+{152,164,164,164,124,0}, // 103 g
+{127,8,4,4,120,0}, // 104 h
+{125,0,0,0,0,0}, // 105 i
+{96,128,128,128,125,0}, // 106 j
+{127,16,40,68,0,0}, // 107 k
+{63,64,0,0,0,0}, // 108 l
+{124,4,24,4,120,0}, // 109 m
+{124,4,4,4,120,0}, // 110 n
+{56,68,68,68,56,0}, // 111 o
+{252,40,36,36,24,0}, // 112 p
+{24,36,36,40,252,0}, // 113 q
+{124,8,4,4,8,0}, // 114 r
+{72,84,84,84,36,0}, // 115 s
+{2,63,66,0,0,0}, // 116 t
+{60,64,64,64,124,0}, // 117 u
+{28,32,64,32,28,0}, // 118 v
+{60,64,112,64,124,0}, // 119 w
+{68,40,16,40,68,0}, // 120 x
+{156,160,160,160,124,0}, // 121 y
+{68,100,84,76,68,0}, // 122 z
+{8,54,65,65,0,0}, // 123 {
+{255,0,0,0,0,0}, // 124 |
+{65,65,54,8,0,0}, // 125 }
+{2,1,1,2,2,1}, // 126 ~
+};
+
+#endif
\ No newline at end of file
diff --git a/flipcontrol_esp32/include/image.h b/flipcontrol_esp32/include/image.h
index 31b23f1..8903370 100644
--- a/flipcontrol_esp32/include/image.h
+++ b/flipcontrol_esp32/include/image.h
@@ -77,10 +77,13 @@ public:
 
     void redraw();
 
+    void setDisplayMirror(bool x, bool y);
+
     
 
     unsigned long updateDuration; //for statistics and debugging. time it took for one update (max)
 };
 
+
 #endif
 
diff --git a/flipcontrol_esp32/src/flipdot.cpp b/flipcontrol_esp32/src/flipdot.cpp
index 0bb19cb..06d0890 100644
--- a/flipcontrol_esp32/src/flipdot.cpp
+++ b/flipcontrol_esp32/src/flipdot.cpp
@@ -61,6 +61,9 @@ void Flipdot::selectColumnSet(uint8_t selcolumn) {
     selectColumn(selcolumn, false);
 }
 void Flipdot::selectColumn(uint8_t selcolumn, bool clear) {
+    if (column_reversed) {
+        selcolumn=COLUMNBYTES*4-1-1 - selcolumn; //COLUMNBYTES*4-1 = COLUMNS
+    }
     //set shift registers for columns to select one column to positive voltage
     uint8_t sc_bit=3-(selcolumn%4); //each two shift registers control four columns
     uint8_t sc_byte=selcolumn/4;
@@ -145,8 +148,13 @@ void Flipdot::shiftDataRow() {  //send out all data to shift registers
     
     //select Rows via shift registers on own controller board
     //LSBFIRST= LSB is QH, bit 8 is QA. //upper byte 
-    shiftOutSlow(PIN_SR_DATA, PIN_SR_CLK, MSBFIRST, row>>8); //MSBFIRST= LSB is QH, bit 8 is QA
-    shiftOutSlow(PIN_SR_DATA, PIN_SR_CLK, MSBFIRST, row&0xff);  //lower byte
+    if (rowdata_msbfirst) {
+        shiftOutSlow(PIN_SR_DATA, PIN_SR_CLK, LSBFIRST, row&0xff);  //lower byte
+        shiftOutSlow(PIN_SR_DATA, PIN_SR_CLK, LSBFIRST, row>>8); //MSBFIRST= LSB is QH, bit 8 is QA
+    }else{
+        shiftOutSlow(PIN_SR_DATA, PIN_SR_CLK, MSBFIRST, row>>8); //MSBFIRST= LSB is QH, bit 8 is QA
+        shiftOutSlow(PIN_SR_DATA, PIN_SR_CLK, MSBFIRST, row&0xff);  //lower byte
+    }
     digitalWrite(PIN_SR_LATCH, HIGH);
     delayMicroseconds(MICROS_SHIFT_LATCH);
     digitalWrite(PIN_SR_LATCH, LOW);
@@ -175,4 +183,9 @@ void Flipdot::setRow(uint16_t _row){
 
 uint16_t Flipdot::getRow() {
     return row;
+}
+
+void Flipdot::setDisplayMirror(bool x, bool y){
+    rowdata_msbfirst=y; //false=not mirrored (connector at top)
+    column_reversed=x;
 }
\ No newline at end of file
diff --git a/flipcontrol_esp32/src/image.cpp b/flipcontrol_esp32/src/image.cpp
index 17e3504..7a5d4bf 100644
--- a/flipcontrol_esp32/src/image.cpp
+++ b/flipcontrol_esp32/src/image.cpp
@@ -69,7 +69,7 @@ void Image::addBuffer_text(String text,uint8_t xoffset, uint8_t yoffset)
             backBuffer[bufferxpos]|= addBuffer;
             Serial.print("Buffer at "); Serial.print(bufferxpos); Serial.print(" add ");Serial.print(addBuffer,2); Serial.print(" result="); Serial.println(backBuffer[bufferxpos],2);
 
-            bufferxpos++; 
+            bufferxpos++;
         }
         bufferxpos-= emptycolumncounter-font_spacing; //remove trailing empty columns except one
     }
@@ -825,4 +825,9 @@ void Image::loop_drawClearTest() {
 void Image::redraw() {
     flag_redraw=true;
     flag_updating=true;
+}
+
+
+void Image::setDisplayMirror(bool x, bool y){
+    flipdot.setDisplayMirror(x,y);
 }
\ No newline at end of file
diff --git a/flipcontrol_esp32/src/main.cpp b/flipcontrol_esp32/src/main.cpp
index 1baa0e7..4a9870a 100644
--- a/flipcontrol_esp32/src/main.cpp
+++ b/flipcontrol_esp32/src/main.cpp
@@ -42,9 +42,9 @@ String error; //used to buffer error messages to be send via mqtt
 
 void setup() {
     flip.init();
+    flip.setDisplayMirror(true,true); //true,true=mirror both axis (rotate 180deg)
 
     Serial.begin(115200);
-    flip.setBuffer_solid(0);
 
     //Setup Homie
     Homie_setFirmware("flipdot", "0.1.0");