create wrapper class for image functions

flipcontrol_esp32/include/flipdot.h

@@ -45,18 +45,19 @@ class Flipdot
 {
     
 private:
-    int blafoo;
-
+    bool HBridgeOK();
+    void resetColumns();
+    void shiftOutSlow(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val);
 
+    uint16_t row; //controls shift registers on own controller pcb
 
+    uint8_t col[COLUMNBYTES]; //column drivers and shift registers on annax pcb
 
 
 public:
     Flipdot();
     void init();
 
-
-    void shiftOutSlow(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val);
     bool clearSelectedColumn();
     bool setSelectedDot();
 
@@ -64,15 +65,10 @@ public:
     void selectColumnSet(uint8_t selcolumn);
     void selectColumn(uint8_t selcolumn, bool clear);
 
-    bool HBridgeOK();
+    void setRow(uint16_t _row);
+    uint16_t getRow();
+    
     void shiftData();    
-
-    void resetColumns();
-    
-
-    uint16_t row; //controls shift registers on own controller pcb
-
-    uint8_t col[COLUMNBYTES]; //column drivers and shift registers on annax pcb
 };
 
 #endif

flipcontrol_esp32/include/image.h

@@ -0,0 +1,43 @@
+#ifndef IMAGE_H
+#define IMAGE_H
+
+#include <Arduino.h>
+
+#include "flipdot.h"
+
+
+#define COLUMNS 50
+#define ROWS 16
+
+
+#define UPDATE_INTERVAL 5
+
+class Image
+{
+    
+private:
+    Flipdot flipdot;
+
+    bool frontBuffer[16][16];
+
+
+    int countz=0;
+
+
+
+public:
+    Image();
+    void init();
+
+    bool updateByColumn(bool direction, bool clearFirst, bool optimizeClear, bool optimizeSet);
+
+    uint8_t getW(); //returns Columns
+    uint8_t getH(); //returns Rows
+
+
+    void loop_testDots();
+    void loop_drawClearTest();
+};
+
+#endif
+

flipcontrol_esp32/src/flipdot.cpp

@@ -159,3 +159,11 @@ void Flipdot::resetColumns() {
         col[i]=0;
     }
 }
+
+void Flipdot::setRow(uint16_t _row){
+    row=_row;
+}
+
+uint16_t Flipdot::getRow() {
+    return row;
+}

flipcontrol_esp32/src/image.cpp

@@ -0,0 +1,169 @@
+#include "image.h"
+
+
+
+Image::Image()
+{
+    
+  
+}
+
+void Image::init()
+{
+    flipdot.init(); //sets pin modes etc.
+}
+
+uint8_t Image::getW() {
+    return COLUMNS;
+}
+
+uint8_t Image::getH() {
+    return ROWS;
+}
+
+
+
+void Image::loop_testDots() {
+
+    static bool init=false;
+    if (!init) {
+        flipdot.setRow(0);
+        Serial.println("Clearing Display");
+        for (int l=0;l<COLUMNS;l++) {
+            flipdot.selectColumnClear(l%COLUMNS);
+
+            flipdot.shiftData();
+
+            if (!flipdot.clearSelectedColumn()) {
+                Serial.println("Error clearing column!");
+            }else{
+                Serial.println("Cleared");
+            }
+
+            delay(50);
+        }
+        init=true;
+        Serial.println("Finished Clearing");
+        delay(1000);
+    }
+    
+
+    
+
+    Serial.println("Clearing");
+    flipdot.setRow(0);
+    flipdot.selectColumnClear(23);
+    flipdot.shiftData();
+    if (!flipdot.clearSelectedColumn()) {
+        Serial.println("Error clearing column!");
+    }
+    delay(50);
+
+    flipdot.setRow(0);
+    flipdot.selectColumnClear(24);
+    flipdot.shiftData();
+    if (!flipdot.clearSelectedColumn()) {
+        Serial.println("Error clearing column!");
+    }
+    delay(100);
+    
+
+    Serial.println("Setting");
+    for (int i=23;i<25;i++) {
+        flipdot.selectColumnSet(i); //lower column number is on the left
+        
+        flipdot.setRow(0);
+        flipdot.setRow(flipdot.getRow()+pow(2, 4));//low significant bits are lower rows (when connector at top)
+        flipdot.setRow(flipdot.getRow()+pow(2, 5));//low significant bits are lower rows (when connector at top)
+        flipdot.shiftData();
+        flipdot.setSelectedDot();
+        delay(50);
+    }
+
+    delay(100);
+
+    countz++;
+    countz%=14;
+
+    //init=false;
+}
+
+
+void Image::loop_drawClearTest() {
+
+    static bool init=false;
+    if (!init) {
+        flipdot.setRow(0);
+        Serial.println("Clearing Display");
+        for (int l=0;l<COLUMNS;l++) {
+            flipdot.selectColumnClear(l%COLUMNS);
+
+            flipdot.shiftData();
+
+            if (!flipdot.clearSelectedColumn()) {
+                Serial.println("Error clearing column!");
+            }else{
+                Serial.println("Cleared");
+            }
+
+            delay(20);
+        }
+        init=true;
+        delay(1000);
+    }
+    
+
+
+    
+    Serial.print("count=");
+    Serial.print(countz);Serial.print(": ");
+
+    //setting colX to 128, 32, 8,2 (or a combination of), then appling 12V to driver and GND to Clear, clears these colums
+        // this applies +12v to selected columns
+    //setting colX to 64,16,4,1 (or a combination of), then setting row shift registers to some setting sets the selected dots
+        // this applies GND to selected columns
+    //reset pin on annax board input should be used (not pulled to gnd for a short time) after dots have been flipped (to disable potentially activated transistors)
+
+
+    //cycle testing set dots        
+    flipdot.selectColumnSet(countz/ROWS); //lower column number is on the left
+    flipdot.setRow(pow(2, (countz)%ROWS));//low significant bits are lower rows (when connector at top)
+
+    
+    
+        
+    /*Serial.print("Row="); Serial.print(row); Serial.print(" Col=");
+    for (uint8_t i=0;i<7;i++) {
+        Serial.print(","); Serial.print(col[i]);
+    }
+    Serial.println();*/
+    //reset pin on ribbon cable high (12Vpullup/open), then low (via Transistor)
+
+    unsigned long starttime=micros();
+    
+    flipdot.shiftData();
+
+
+    flipdot.setSelectedDot();
+
+
+    unsigned long shiftduration=micros()-starttime;
+    Serial.println("");
+    Serial.print("Duration="); Serial.println(shiftduration);
+
+
+    
+    countz++;
+
+    if (countz>=ROWS*COLUMNS) {
+        countz=0;
+        init=false;
+    }
+
+
+
+    
+}
+
+
+

flipcontrol_esp32/src/main.cpp

@@ -1,182 +1,39 @@
 #include <Arduino.h>
 
+
+
 #include "flipdot.h"
+#include "image.h"
 
 
-Flipdot flipdot;
 
 
+Image flip;
 
 unsigned long loopmillis=0;
 unsigned long last_update=0;
 
-#define UPDATE_INTERVAL 5
+
 
 void setup() {
-    flipdot.init();
+    flip.init();
 
     Serial.begin(115200);
 }
 
-int countz=0;
-
-void loop_testDots();
-void loop_drawClearTest();
 
 void loop() {
     loopmillis = millis();
     
-    loop_drawClearTest();
-    //loop_testDots();
-
-
-    
-}
-
-#define COLUMNS 50
-#define ROWS 16
-
-void loop_testDots() {
-
-    static bool init=false;
-    if (!init) {
-        flipdot.row=0;
-        Serial.println("Clearing Display");
-        for (int l=0;l<COLUMNS;l++) {
-            flipdot.selectColumnClear(l%COLUMNS);
-
-            flipdot.shiftData();
-
-            if (!flipdot.clearSelectedColumn()) {
-                Serial.println("Error clearing column!");
-            }else{
-                Serial.println("Cleared");
-            }
-
-            delay(50);
-        }
-        init=true;
-        Serial.println("Finished Clearing");
-        delay(1000);
-    }
-    
-
-    
-
-    Serial.println("Clearing");
-    flipdot.row=0;
-    flipdot.selectColumnClear(23);
-    flipdot.shiftData();
-    if (!flipdot.clearSelectedColumn()) {
-        Serial.println("Error clearing column!");
-    }
-    delay(50);
-
-    flipdot.row=0;
-    flipdot.selectColumnClear(24);
-    flipdot.shiftData();
-    if (!flipdot.clearSelectedColumn()) {
-        Serial.println("Error clearing column!");
-    }
-    delay(100);
-    
-
-    Serial.println("Setting");
-    for (int i=23;i<25;i++) {
-        flipdot.selectColumnSet(i); //lower column number is on the left
-        
-        flipdot.row=0;
-        flipdot.row+=pow(2, 4);//low significant bits are lower rows (when connector at top)
-        flipdot.row+=pow(2, 5);//low significant bits are lower rows (when connector at top)
-        flipdot.shiftData();
-        flipdot.setSelectedDot();
-        delay(50);
-    }
-
-    delay(100);
-
-    countz++;
-    countz%=14;
-
-    //init=false;
-}
-
-
-void loop_drawClearTest() {
-
-    static bool init=false;
-    if (!init) {
-        flipdot.row=0;
-        Serial.println("Clearing Display");
-        for (int l=0;l<COLUMNS;l++) {
-            flipdot.selectColumnClear(l%COLUMNS);
-
-            flipdot.shiftData();
-
-            if (!flipdot.clearSelectedColumn()) {
-                Serial.println("Error clearing column!");
-            }else{
-                Serial.println("Cleared");
-            }
-
-            delay(20);
-        }
-        init=true;
-        delay(1000);
-    }
-    
 
     if (loopmillis > last_update + UPDATE_INTERVAL) 
     {
-        
-        Serial.print("count=");
-        Serial.print(countz);Serial.print(": ");
-
-        //setting colX to 128, 32, 8,2 (or a combination of), then appling 12V to driver and GND to Clear, clears these colums
-            // this applies +12v to selected columns
-        //setting colX to 64,16,4,1 (or a combination of), then setting row shift registers to some setting sets the selected dots
-            // this applies GND to selected columns
-        //reset pin on annax board input should be used (not pulled to gnd for a short time) after dots have been flipped (to disable potentially activated transistors)
-
-
-        //cycle testing set dots        
-        flipdot.selectColumnSet(countz/ROWS); //lower column number is on the left
-        flipdot.row=pow(2, (countz)%ROWS);//low significant bits are lower rows (when connector at top)
-    
-        
-        
-            
-        /*Serial.print("Row="); Serial.print(row); Serial.print(" Col=");
-        for (uint8_t i=0;i<7;i++) {
-            Serial.print(","); Serial.print(col[i]);
-        }
-        Serial.println();*/
-        //reset pin on ribbon cable high (12Vpullup/open), then low (via Transistor)
-
-        unsigned long starttime=micros();
-        
-        flipdot.shiftData();
-
-
-        flipdot.setSelectedDot();
-
-
-        unsigned long shiftduration=micros()-starttime;
-        Serial.println("");
-        Serial.print("Duration="); Serial.println(shiftduration);
-
-
+        flip.loop_drawClearTest();
+        //loop_testDots();
 
         last_update=loopmillis;
-        countz++;
-
-        if (countz>=ROWS*COLUMNS) {
-            countz=0;
-            init=false;
-        }
-
     }
 
 
-}
     
+}