remove row sr update when clearing

flipcontrol_esp32/include/flipdot.h

@@ -68,7 +68,8 @@ public:
     void setRow(uint16_t _row);
     uint16_t getRow();
 
-    void shiftData();    
+    void shiftDataRow();
+    void shiftDataColumn();
 };
 
 #endif

flipcontrol_esp32/src/flipdot.cpp

@@ -70,10 +70,10 @@ void Flipdot::selectColumn(uint8_t selcolumn, bool clear) {
 }
 
 bool Flipdot::clearSelectedColumn() {
+    shiftDataColumn();
+
     //Clear Columns
-    if (row!=0) {
+
-        return 0; //error. row is selected (short circuit!)
-    }
     for (uint8_t cc=0;cc<COLUMNBYTES;cc++) {
         //Serial.print("checking cc="); Serial.println(cc);
         for (uint8_t i=0;i<8;i+=2) {
@@ -97,6 +97,9 @@ bool Flipdot::clearSelectedColumn() {
 
 bool Flipdot::setSelectedDot() {
 
+    shiftDataRow();
+    shiftDataColumn();
+    
     for (uint8_t cc=0;cc<COLUMNBYTES;cc++) {
         //Serial.print("checking cc="); Serial.println(cc);
         for (uint8_t i=1;i<8;i+=2) {
@@ -112,7 +115,7 @@ bool Flipdot::setSelectedDot() {
         return 0;
     }
 
-    digitalWrite(PIN_SR_OE, LOW); //Active Low
+    digitalWrite(PIN_SR_OE, LOW); //Active Low. Enable Row
     digitalWrite(PIN_DRIVE, HIGH);
     delayMicroseconds(MICROS_DRIVEDOTSET); //Drive Dot
     digitalWrite(PIN_SR_OE, HIGH); //Active Low
@@ -137,7 +140,7 @@ bool Flipdot::HBridgeOK() {
 }
 
 
-void Flipdot::shiftData() {  //send out all data to shift registers
+void Flipdot::shiftDataRow() {  //send out all data to shift registers
     
     //select Rows via shift registers on own controller board
     shiftOutSlow(PIN_SR_DATA, PIN_SR_CLK, LSBFIRST, row&0xff);  //lower byte
@@ -146,6 +149,10 @@ void Flipdot::shiftData() {  //send out all data to shift registers
     delayMicroseconds(MICROS_SHIFT_LATCH);
     digitalWrite(PIN_SR_LATCH, LOW);
 
+}
+
+void Flipdot::shiftDataColumn() {  //send out all data to shift registers
+    
     digitalWrite(PIN_RESET_DRVBRD,LOW); //get driverboard shift registers out of reset
 
     //Select Columns via Shift registers

flipcontrol_esp32/src/image.cpp

@@ -75,7 +75,6 @@ bool Image::updateByColumn(bool direction, bool clearFirst, bool optimizeClear,
     if (update_counter%2==0) { //even counter numbers are for clearing
         flipdot.setRow(0);
         flipdot.selectColumnClear(x);
-        flipdot.shiftData();
         if (!flipdot.clearSelectedColumn()) {
             Serial.println("Error clearing column!");
         }
@@ -84,7 +83,6 @@ bool Image::updateByColumn(bool direction, bool clearFirst, bool optimizeClear,
         flipdot.selectColumnSet(x); //lower column number is on the left
         
         flipdot.setRow(backBuffer[x]);
-        flipdot.shiftData();
         flipdot.setSelectedDot();
 
         frontBuffer[x]=backBuffer[x]; //flip current column in buffer
@@ -114,7 +112,6 @@ void Image::loop_testDots() {
         for (int l=0;l<COLUMNS;l++) {
             flipdot.selectColumnClear(l%COLUMNS);
 
-            flipdot.shiftData();
 
             if (!flipdot.clearSelectedColumn()) {
                 Serial.println("Error clearing column!");
@@ -135,7 +132,6 @@ void Image::loop_testDots() {
     Serial.println("Clearing");
     flipdot.setRow(0);
     flipdot.selectColumnClear(23);
-    flipdot.shiftData();
     if (!flipdot.clearSelectedColumn()) {
         Serial.println("Error clearing column!");
     }
@@ -143,7 +139,6 @@ void Image::loop_testDots() {
 
     flipdot.setRow(0);
     flipdot.selectColumnClear(24);
-    flipdot.shiftData();
     if (!flipdot.clearSelectedColumn()) {
         Serial.println("Error clearing column!");
     }
@@ -157,7 +152,6 @@ void Image::loop_testDots() {
         flipdot.setRow(0);
         flipdot.setRow(flipdot.getRow()+pow(2, 4));//low significant bits are lower rows (when connector at top)
         flipdot.setRow(flipdot.getRow()+pow(2, 5));//low significant bits are lower rows (when connector at top)
-        flipdot.shiftData();
         flipdot.setSelectedDot();
         delay(50);
     }
@@ -180,8 +174,6 @@ void Image::loop_drawClearTest() {
         for (int l=0;l<COLUMNS;l++) {
             flipdot.selectColumnClear(l%COLUMNS);
 
-            flipdot.shiftData();
-
             if (!flipdot.clearSelectedColumn()) {
                 Serial.println("Error clearing column!");
             }else{
@@ -223,9 +215,6 @@ void Image::loop_drawClearTest() {
 
     unsigned long starttime=micros();
 
-    flipdot.shiftData();
-
-
     flipdot.setSelectedDot();