fix row flipping

flipcontrol_esp32/src/main.cpp

@@ -40,6 +40,8 @@ void selectColumn(uint8_t selcolumn, bool clear);
 bool HBridgeOK();
 void shiftData();
 
+void resetColumns();
+
 unsigned long loopmillis=0;
 unsigned long last_update=0;
 #define UPDATE_INTERVAL 500
@@ -83,7 +85,7 @@ uint8_t col[7];
 
 void loop() {
     loopmillis = millis();
-    digitalWrite(PIN_OE, LOW); //Active Low
+    
 
 
     static bool init=false;
@@ -150,34 +152,79 @@ void loop() {
 
         //selectColumnClear(countz%25);
 
-        selectColumnSet((12+(countz/25))%25); //lower column number is on the left
-
-        row=pow(2, countz%16); //low significant bits are lower rows (when connector at top)
-
-        
-
+        //cycle testing set dots
         
         
-        Serial.print("Row="); Serial.print(row); Serial.print(" Col=");
-        for (uint8_t i=0;i<7;i++) {
-            Serial.print(","); Serial.print(col[i]);
+        selectColumnSet(countz/16); //lower column number is on the left
+        row=pow(2, (countz)%16);//low significant bits are lower rows (when connector at top)
+    
+        
+        bool run_setdots=true;
+        /*
+        
+        switch(countz) {
+            case 0:
+                selectColumnSet(5);
+                row=pow(2, 3); //4. zeile von unten
+                break;
+            
+
+            case 1:
+                selectColumnSet(5);
+                row=pow(2, 4); //5. zeile von unten
+                break;
+            
+            case 2:
+                selectColumnSet(5);
+                row=pow(2, 5);
+                break;
+            
+            case 3:
+                selectColumnSet(5);
+                row=pow(2, 8);
+                break;
+            
+            case 4:
+                selectColumnSet(2);
+                row=pow(2, 1);
+                break;
+            
+
+            default:
+                row=0;
+                resetColumns();
+
+                run_setdots=false;
+
         }
-        Serial.println();
-        //reset pin on ribbon cable high (12Vpullup/open), then low (via Transistor)
-        
-        shiftData();
+        */
+
+        if (run_setdots) 
+        {
+            
+            Serial.print("Row="); Serial.print(row); Serial.print(" Col=");
+            for (uint8_t i=0;i<7;i++) {
+                Serial.print(","); Serial.print(col[i]);
+            }
+            Serial.println();
+            //reset pin on ribbon cable high (12Vpullup/open), then low (via Transistor)
+            
+            shiftData();
 
 
-        setSelectedDot();
+            setSelectedDot();
 
 
-        
-        /*if (!clearSelectedColumn()) {
-            Serial.println("Error clearing column!");
+            
+            /*if (!clearSelectedColumn()) {
+                Serial.println("Error clearing column!");
+            }else{
+                Serial.println("Cleared");
+            }*/
         }else{
-            Serial.println("Cleared");
-        }*/
-        
+            Serial.println("END");
+        }
+            
         
         
 
@@ -203,11 +250,11 @@ void shiftOutSlow(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t v
 		else	
 			digitalWrite(dataPin, !!(val & (1 << (7 - i))));
 			
-        delayMicroseconds(100);
+        delayMicroseconds(1000);
 		digitalWrite(clockPin, HIGH);
-        delayMicroseconds(100);
+        delayMicroseconds(1000);
 		digitalWrite(clockPin, LOW);		
-        delayMicroseconds(100);
+        delayMicroseconds(1000);
 	}
 }
 
@@ -222,9 +269,10 @@ void selectColumn(uint8_t selcolumn, bool clear) {
     uint8_t sc_bit=3-(selcolumn%4); //each two shift registers control four columns
     uint8_t sc_byte=selcolumn/4;
 
-    for (uint8_t i=0;i<7;i++) {
+    /*for (uint8_t i=0;i<7;i++) {
         col[i]=0;
-    }
+    }*/
+    resetColumns();
 
     col[sc_byte]=pow(2, (sc_bit*2+clear)); // possible numbers for clear=false: 1,4,16,64
     /*
@@ -280,8 +328,10 @@ bool setSelectedDot() {
         return 0;
     }
 
+    digitalWrite(PIN_OE, LOW); //Active Low
     digitalWrite(PIN_DRIVE, HIGH);
     delay(10);
+    digitalWrite(PIN_OE, HIGH); //Active Low
     digitalWrite(PIN_DRIVE, LOW);
     return 1;
 }
@@ -301,15 +351,23 @@ bool HBridgeOK() {
 }
 
 void shiftData() { //send out all data to shift registers
+    
+    
+    //select Rows via shift registers on own controller board
+    shiftOutSlow(PIN_DATA, PIN_CLK, LSBFIRST, row&0xff);  //lower byte
+    shiftOutSlow(PIN_DATA, PIN_CLK, LSBFIRST, row>>8);  //LSBFIRST= LSB is QH, bit 8 is QA. //upper byte
+    digitalWrite(PIN_LATCH, HIGH);
+    delayMicroseconds(1000);
+    digitalWrite(PIN_LATCH, LOW);
+
     //Select Columns via Shift registers
     for (uint8_t i=0;i<7;i++) {
         shiftOutSlow(PIN_DATA_DRVBRD, PIN_CLK_DRVBRD, LSBFIRST, col[6-i]);
     }
-    
-    //select Rows via shift registers on own controller board
-    shiftOutSlow(PIN_DATA, PIN_CLK, LSBFIRST, row%256); 
-    shiftOutSlow(PIN_DATA, PIN_CLK, LSBFIRST, row/256);  //LSBFIRST= LSB is QH, bit 8 is QA.
-    digitalWrite(PIN_LATCH, HIGH);
-    delayMicroseconds(100);
-    digitalWrite(PIN_LATCH, LOW);
+}
+
+void resetColumns() {
+    for (uint8_t i=0;i<7;i++) {
+        col[i]=0;
+    }
 }