move device defined to environments

data/homie/config.json

@@ -15,3 +15,4 @@
     "enabled": false
     }
 }
+    

platformio.ini

@@ -8,7 +8,15 @@
 ; Please visit documentation for the other options and examples
 ; https://docs.platformio.org/page/projectconf.html
 
-[env:d1_mini]
+# Flash upload with platformio run -t upload --environment sensorespx
+
+[platformio]
+#For Config upload comment in data_dir line and flash with platformio run -t uploadfs --environment sensorespx
+data_dir=data_tischlicht
+#data_dir=data_kuechenlicht
+
+#Tischlicht
+[env:tischlicht]
 platform = espressif8266
 board = d1_mini
 framework = arduino
@@ -17,3 +25,39 @@ monitor_speed= 115200
 
 lib_deps =
      Homie@3.0.0
+
+
+build_flags =
+    -D DUALCOLOR
+    -D LED_WW=14 ;D5 = GPIO14 (pin5)
+    -D LED_CW=12 ;D6 = GPIO12 (pin6)
+    -D BTN_A=13 ;D7 = GPIO13 (pin 7)
+    -D BTN_B=15 ;D8 = GPIO15 (pin 10)
+    -D PWM_FREQUENCY=500 ;default: 1000 Hz
+    -D PWM_MAX=1023 ;10 bit dac
+    -D BRIGHTNESSCURVE=1.4
+    -D TEMPERATURE_MIN=2760 ;temperature of warm white leds
+    -D TEMPERATURE_MAX=5640 ;temperature of cold white leds
+    -D FW_NAME=\"tischlicht\"
+
+
+#Kuechenlicht
+[env:kuechenlicht]
+platform = espressif8266
+board = d1_mini
+framework = arduino
+
+monitor_speed= 115200
+
+lib_deps =
+     Homie@3.0.0
+
+
+build_flags =
+    -D LED_PWM=D5
+    -D BTN_A=D7
+    -D PWM_FREQUENCY=1000 ;default: 1000 Hz
+    -D PWM_MAX=1023 ;10 bit dac
+    -D PWM_MINDIMMED=PWM_MAX/3
+    -D BRIGHTNESSCURVE=2
+    -D FW_NAME=\"kuechenlicht\"

src/main.cpp

@@ -3,21 +3,10 @@
  * Flash Size: 4M (1M SPIFFS)
  */
 
-//Upload config: platformio run --target uploadfs
-
-//#define TISCHLICHT
-#define KUECHENLICHT
-
-
-#ifdef TISCHLICHT
-  #define DUALCOLOR
-#endif
-
 #include <Arduino.h>
 #include <Homie.h>
 
 
-#define FW_NAME "kuechenlicht"
 #define FW_VERSION "1.0.0"
 
 bool enableHandler(const HomieRange& range, const String& value);
@@ -35,32 +24,8 @@ float mapFloat(float x, float in_min, float in_max, float out_min, float out_max
 HomieNode lightNode("light", "Light", "light"); //paramters: topic, $name, $type
 
 
-#ifdef TISCHLICHT
-  #define LED_WW 14 //D5 = GPIO14 (pin5)
-  #define LED_CW 12 //D6 = GPIO12 (pin6)
-#endif
-#ifdef KUECHENLICHT
-  #define LED_PWM D5
-#endif
-
-#ifdef TISCHLICHT
-  #define BTN_A 13 //D7 = GPIO13 (pin 7)
-  #define BTN_B 15 //D8 = GPIO15 (pin 10)
-#endif
-#ifdef KUECHENLICHT
-  #define BTN_A D7
-#endif
 
 
-#define PWM_MAX 1023 //10 bit dac
-
-#ifdef TISCHLICHT
-  #define PWM_FREQUENCY 500 //default: 1000 Hz
-#endif
-#ifdef KUECHENLICHT
-  #define PWM_FREQUENCY 1000 //default: 1000 Hz
-  #define PWM_MINDIMMED PWM_MAX/3 //if light turns on later than just above 0 pwm
-#endif
 
 
 boolean enable=false;
@@ -70,22 +35,11 @@ float enable_fadevalue_change_per_loop=0.01; //fixed value. For manual calculato
 float set_brightness=2; //0 to 2. 1 is maximum brightness with full color range still possible. 2 is full brightness regardless of possible color temp
 #define BRIGHTNESS_MIN 0.0
 #define BRIGHTNESS_MAX 2.0 //if temperature is in between both strips brightness of 2 means both are at full power. otherwise brightness will be clipped
-#ifdef TISCHLICHT
-  #define BRIGHTNESSCURVE 1.4
-#endif
-#ifdef KUECHENLICHT
-  #define BRIGHTNESSCURVE 2
-#endif
 
 float brightness=set_brightness;
 float brightness_change_per_loop=0; //will be calculated by Handler
 
 
-#ifdef TISCHLICHT
-  #define TEMPERATURE_MIN 2760 //temperature of warm white leds
-  #define TEMPERATURE_MAX 5640 //temperature of cold white leds
-#endif
-
 #ifdef DUALCOLOR
   float set_temperature=(TEMPERATURE_MAX+TEMPERATURE_MIN)/2;
   float temperature=set_temperature;
@@ -137,23 +91,21 @@ void setup() {
   Serial.println("Hello");
 
   analogWriteFreq(PWM_FREQUENCY);
-  #ifdef TISCHLICHT
+  #ifdef DUALCOLOR
     pinMode(LED_WW, OUTPUT);
     pinMode(LED_CW, OUTPUT);
     analogWrite(LED_CW, PWM_MAX); //high = off
     analogWrite(LED_WW, PWM_MAX); //high = off
-  #endif
+  #else
-  #ifdef KUECHENLICHT
     pinMode(LED_PWM, OUTPUT);
     analogWrite(LED_PWM, PWM_MAX); //high = off
   #endif
   
 
-  #ifdef TISCHLICHT
+  #ifdef DUALCOLOR
     pinMode(BTN_A, INPUT);
     pinMode(BTN_B, INPUT);
-  #endif
+  #else
-  #ifdef KUECHENLICHT
     pinMode(BTN_A, INPUT);
   #endif