interfisch
/
bobbycar
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

add readme for hc12 and openlog notes

This commit is contained in:
interfisch 2021-03-26 18:04:51 +01:00
parent 37d7d25773
commit 48ebf40656
1 changed files with 27 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
logdata_visualization/README.md
View File

@ -5,4 +5,30 @@ This processing software can display log information from the bobbycar in realim
It is used alongside the controller_teensy firmware. It is used alongside the controller_teensy firmware.
Log information is constantly printed out on one serial interface and can be written either to an sd card or transmitted via rf or bluetooth. Log information is constantly printed out on one serial interface and can be written either to an sd card or transmitted via rf or bluetooth.
![screenshot](Screenshot.png "Screenshot") ![screenshot](Screenshot.png "Screenshot")
## OpenLog
Tutorial for OpenLog Serial SD Card logger: https://learn.sparkfun.com/tutorials/openlog-hookup-guide/configuration-file
Only works reliable on 3v3.
Using 5v restarts occur (prints 12> over serial and everytime a new file is created).
my CONFIG.TXT content:
115200,26,3,0,1,1,0
baud,escape,esc#,mode,verb,echo,ignoreRX
## HC12 433MHz Module
5v or 3v3.
Bridge Set pin to ground and power up to enter setup mode.
Use Arduino IDE to send commands via serial terminal with 9600 Baud.
AT+RX shows current settings.
Use following commands to setup:
AT+B115200
AT+C002
Using channel 2 instead of 1, because 1 receive didnt work with two computers.