interfisch
/
Adalight-FastLED_rgbwMod
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
My modifications to the adalight ambilight code for fastled to use SK6812 RGBW Leds.
89 Commits 1 Branch 0 Tags 222 KiB
C++ 90.5%
C 9.5%
Go to file
David Madison 1e744591cc Changed Lightpack link to point to release page 2017-05-05 09:34:50 -04:00
Arduino/LEDstream_FastLED Updated date 2017-05-05 09:18:27 -04:00
LICENSE Rename COPYING to LICENSE 2017-03-19 12:06:25 -04:00
README.md Changed Lightpack link to point to release page 2017-05-05 09:34:50 -04:00

README.md

Adalight-FastLED

Adalight-Rainbow

Synopsis

This project modifies the Adalight protocol to use FastLED (fastled.io). This expands Adalight to, in theory, work with any supported FastLED strip including WS2812B (aka Adafruit NeoPixels).

In addition to ambilight setups, the protocol can be used to stream any color data over serial from a computer to supported LED strips.

For this sketch to work, you'll need to have a copy of the FastLED library. You can download FastLED from GitHub or through the libraries manager of the Arduino IDE. This program was writen using FastLED 3.1.3 - note that earlier versions of FastLED are untested and may not work properly.

Configuration

Open the LEDstream_FastLED file in the Arduino IDE and customize the settings at the top for your setup. You will need to change:

  • Number of LEDs
  • LED data pin
  • LED type

Additional settings allow for adjusting:

  • Max brightness
  • LED color order
  • Serial speed
  • Serial timeout length

There are also optional settings to clear the LEDs on reset, configure a dedicated ground pin, and to put the Arduino into a "calibration" mode, where all LED colors match the first LED.

Upload to your Arduino and use a corresponding PC application to stream color data. You can get the Processing files from the main Adalight repository, though I would recommend using Patrick Siegler's fork of Lightpacks's Prismatik, which you can find here.

Issues and LED-types

I've only tested the code with the WS2812B strips I have on hand, but so far it performs flawlessly. If you find an issue with the code or can confirm that it works with another chipset, please let me know!

Credits and Contributions

Thanks to Adafruit for the initial code and for developing the Adalight protocol. The base for the original FastLED modifications is this gist by James Bruce. Thanks James!

Pull requests to improve this software are always welcome!

License

Adalight is free software: you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

Adalight is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with Adalight. If not, see http://www.gnu.org/licenses/.