interfisch
/
Adalight-FastLED_rgbwMod
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update README.md

This commit is contained in:
David Madison 2017-06-08 18:03:22 -04:00 committed by GitHub
parent aacedb9725
commit 774316752e
1 changed files with 7 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
README.md
View File

@ -10,7 +10,7 @@ In addition to ambilight setups, the protocol can be used to stream *any* color
For this sketch to work, you'll need to have a copy of the FastLED library. You can download FastLED [from GitHub](https://github.com/FastLED/FastLED) or through the libraries manager of the Arduino IDE. This program was writen using FastLED 3.1.3 - note that earlier versions of FastLED are untested and may not work properly. For this sketch to work, you'll need to have a copy of the FastLED library. You can download FastLED [from GitHub](https://github.com/FastLED/FastLED) or through the libraries manager of the Arduino IDE. This program was writen using FastLED 3.1.3 - note that earlier versions of FastLED are untested and may not work properly.
## Configuration ## Basic Setup
Open the LEDstream_FastLED file in the Arduino IDE and customize the settings at the top for your setup. You will need to change: Open the LEDstream_FastLED file in the Arduino IDE and customize the settings at the top for your setup. You will need to change:
@ -18,16 +18,18 @@ Open the LEDstream_FastLED file in the Arduino IDE and customize the settings at
- LED data pin - LED data pin
- LED type - LED type
Additional settings allow for adjusting: Upload to your Arduino and use a corresponding PC application to stream color data. You can get the Processing files from the [main Adalight repository](https://github.com/adafruit/Adalight), though I would recommend using [Patrick Siegler's](https://github.com/psieg/) fork of Lightpacks's Prismatik, which you can find [here](https://github.com/psieg/Lightpack/releases).
## Additional Settings
There are additional settings to allow for adjusting:
- Max brightness - Max brightness
- LED color order - LED color order
- Serial speed - Serial speed
- Serial timeout length - Serial timeout length
There are also optional settings to clear the LEDs on reset, configure a dedicated ground pin, and to put the Arduino into a "calibration" mode, where all LED colors match the first LED. There are also optional settings to clear the LEDs on reset, configure a dedicated ground pin, and to put the Arduino into a "calibration" mode, where all LED colors match the first LED. To help with flickering, the option to flush the serial buffer after every latch is enabled by default.
Upload to your Arduino and use a corresponding PC application to stream color data. You can get the Processing files from the [main Adalight repository](https://github.com/adafruit/Adalight), though I would recommend using [Patrick Siegler's](https://github.com/psieg/) fork of Lightpacks's Prismatik, which you can find [here](https://github.com/psieg/Lightpack/releases).
## Debug Settings ## Debug Settings