#ifndef UART_H #define UART_H /************************************************************************ Title: Interrupt UART library with receive/transmit circular buffers Author: Peter Fleury http://jump.to/fleury File: $Id: uart.h,v 1.8.2.1 2007/07/01 11:14:38 peter Exp $ Software: AVR-GCC 4.1, AVR Libc 1.4 Hardware: any AVR with built-in UART, tested on AT90S8515 & ATmega8 at 4 Mhz License: GNU General Public License Usage: see Doxygen manual LICENSE: Copyright (C) 2006 Peter Fleury This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. ************************************************************************/ /************************************************************************ uart_available, uart_flush, uart1_available, and uart1_flush functions were adapted from the Arduino HardwareSerial.h library by Tim Sharpe on 11 Jan 2009. The license info for HardwareSerial.h is as follows: HardwareSerial.h - Hardware serial library for Wiring Copyright (c) 2006 Nicholas Zambetti. All right reserved. This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ************************************************************************/ /************************************************************************ Changelog for modifications made by Tim Sharpe, starting with the current library version on his Web site as of 05/01/2009. Date Description ========================================================================= 05/12/2009 Added Arduino-style available() and flush() functions for both supported UARTs. Really wanted to keep them out of the library, so that it would be as close as possible to Peter Fleury's original library, but has scoping issues accessing internal variables from another program. Go C! ************************************************************************/ /** * @defgroup pfleury_uart UART Library * @code #include @endcode * * @brief Interrupt UART library using the built-in UART with transmit and receive circular buffers. * * This library can be used to transmit and receive data through the built in UART. * * An interrupt is generated when the UART has finished transmitting or * receiving a byte. The interrupt handling routines use circular buffers * for buffering received and transmitted data. * * The UART_RX_BUFFER_SIZE and UART_TX_BUFFER_SIZE constants define * the size of the circular buffers in bytes. Note that these constants must be a power of 2. * You may need to adapt this constants to your target and your application by adding * CDEFS += -DUART_RX_BUFFER_SIZE=nn -DUART_RX_BUFFER_SIZE=nn to your Makefile. * * @note Based on Atmel Application Note AVR306 * @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury */ /**@{*/ #if (__GNUC__ * 100 + __GNUC_MINOR__) < 304 #error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !" #endif /* ** constants and macros */ /** @brief UART Baudrate Expression * @param xtalcpu system clock in Mhz, e.g. 4000000L for 4Mhz * @param baudrate baudrate in bps, e.g. 1200, 2400, 9600 */ #define UART_BAUD_SELECT(baudRate,xtalCpu) ((xtalCpu)/((baudRate)*16l)-1) /** @brief UART Baudrate Expression for ATmega double speed mode * @param xtalcpu system clock in Mhz, e.g. 4000000L for 4Mhz * @param baudrate baudrate in bps, e.g. 1200, 2400, 9600 */ #define UART_BAUD_SELECT_DOUBLE_SPEED(baudRate,xtalCpu) (((xtalCpu)/((baudRate)*8l)-1)|0x8000) /** Size of the circular receive buffer, must be power of 2 */ #ifndef UART_RX_BUFFER_SIZE #define UART_RX_BUFFER_SIZE 32 #endif /** Size of the circular transmit buffer, must be power of 2 */ #ifndef UART_TX_BUFFER_SIZE #define UART_TX_BUFFER_SIZE 32 #endif /* test if the size of the circular buffers fits into SRAM */ #if ( (UART_RX_BUFFER_SIZE+UART_TX_BUFFER_SIZE) >= (RAMEND-0x60 ) ) #error "size of UART_RX_BUFFER_SIZE + UART_TX_BUFFER_SIZE larger than size of SRAM" #endif /* ** high byte error return code of uart_getc() */ #define UART_FRAME_ERROR 0x0800 /* Framing Error by UART */ #define UART_OVERRUN_ERROR 0x0400 /* Overrun condition by UART */ #define UART_BUFFER_OVERFLOW 0x0200 /* receive ringbuffer overflow */ #define UART_NO_DATA 0x0100 /* no receive data available */ /* ** function prototypes */ /** @brief Initialize UART and set baudrate @param baudrate Specify baudrate using macro UART_BAUD_SELECT() @return none */ extern void uart_init(unsigned int baudrate); /** * @brief Get received byte from ringbuffer * * Returns in the lower byte the received character and in the * higher byte the last receive error. * UART_NO_DATA is returned when no data is available. * * @param void * @return lower byte: received byte from ringbuffer * @return higher byte: last receive status * - \b 0 successfully received data from UART * - \b UART_NO_DATA *
no receive data available * - \b UART_BUFFER_OVERFLOW *
Receive ringbuffer overflow. * We are not reading the receive buffer fast enough, * one or more received character have been dropped * - \b UART_OVERRUN_ERROR *
Overrun condition by UART. * A character already present in the UART UDR register was * not read by the interrupt handler before the next character arrived, * one or more received characters have been dropped. * - \b UART_FRAME_ERROR *
Framing Error by UART */ extern unsigned int uart_getc(void); /** * @brief Put byte to ringbuffer for transmitting via UART * @param data byte to be transmitted * @return none */ extern void uart_putc(unsigned char data); /** * @brief Put string to ringbuffer for transmitting via UART * * The string is buffered by the uart library in a circular buffer * and one character at a time is transmitted to the UART using interrupts. * Blocks if it can not write the whole string into the circular buffer. * * @param s string to be transmitted * @return none */ extern void uart_puts(const char *s ); /** * @brief Put string from program memory to ringbuffer for transmitting via UART. * * The string is buffered by the uart library in a circular buffer * and one character at a time is transmitted to the UART using interrupts. * Blocks if it can not write the whole string into the circular buffer. * * @param s program memory string to be transmitted * @return none * @see uart_puts_P */ extern void uart_puts_p(const char *s ); /** * @brief Macro to automatically put a string constant into program memory */ #define uart_puts_P(__s) uart_puts_p(PSTR(__s)) /** * @brief Return number of bytes waiting in the receive buffer * @param none * @return bytes waiting in the receive buffer */ extern int uart_available(void); /** * @brief Flush bytes waiting in receive buffer * @param none * @return none */ extern void uart_flush(void); /** @brief Initialize USART1 (only available on selected ATmegas) @see uart_init */ extern void uart1_init(unsigned int baudrate); /** @brief Get received byte of USART1 from ringbuffer. (only available on selected ATmega) @see uart_getc */ extern unsigned int uart1_getc(void); /** @brief Put byte to ringbuffer for transmitting via USART1 (only available on selected ATmega) @see uart_putc */ extern void uart1_putc(unsigned char data); /** @brief Put string to ringbuffer for transmitting via USART1 (only available on selected ATmega) @see uart_puts */ extern void uart1_puts(const char *s ); /** @brief Put string from program memory to ringbuffer for transmitting via USART1 (only available on selected ATmega) @see uart_puts_p */ extern void uart1_puts_p(const char *s ); /** @brief Macro to automatically put a string constant into program memory */ #define uart1_puts_P(__s) uart1_puts_p(PSTR(__s)) /** @brief Return number of bytes waiting in the receive buffer */ extern int uart1_available(void); /** @brief Flush bytes waiting in receive buffer */ extern void uart1_flush(void); /**@}*/ #endif // UART_H