crashtest-r0ket/firmware/core/projectconfig.h

91 lines
3.6 KiB
C

#include "lpc134x.h"
#include "sysdefs.h"
/*=========================================================================
CORE CPU SETTINGS
-----------------------------------------------------------------------
CFG_CPU_CCLK Value is for reference only. 'core/cpu/cpu.c' must
be modified to change the clock speed, but the value
should be indicated here since CFG_CPU_CCLK is used by
other peripherals to determine timing.
-----------------------------------------------------------------------*/
#define CFG_CPU_CCLK (72000000) // 1 tick = 13.88nS
/*=========================================================================*/
/*=========================================================================
SYSTICK TIMER
-----------------------------------------------------------------------
CFG_SYSTICK_DELAY_IN_MS The number of milliseconds between each tick
of the systick timer.
-----------------------------------------------------------------------*/
#define CFG_SYSTICK_DELAY_IN_MS (1)
/*=========================================================================*/
/*=========================================================================
SSP
-----------------------------------------------------------------------
CFG_SSP0_SCKPIN_2_11 Indicates which pin should be used for SCK0
CFG_SSP0_SCKPIN_0_6
-----------------------------------------------------------------------*/
#define CFG_SSP0_SCKPIN_2_11
/*=========================================================================*/
/*=========================================================================
ON-BOARD LED
-----------------------------------------------------------------------
CFG_LED_PORT The port for the on board LED
CFG_LED_PIN The pin for the on board LED
CFG_LED_ON The pin state to turn the LED on (0 = low, 1 = high)
CFG_LED_OFF The pin state to turn the LED off (0 = low, 1 = high)
-----------------------------------------------------------------------*/
#define CFG_LED_PORT (1)
#define CFG_LED_PIN (11)
#define CFG_LED_ON (1)
#define CFG_LED_OFF (0)
/*=========================================================================*/
/*=========================================================================
SD CARD
-----------------------------------------------------------------------
CFG_HAVE_SDCARD Indicates whether the SD Card code should be
included in the filesystem access code.
If the SD Card is enabled, the number of volumes
in filesystem/ffconf.h must be increased accordingly.
-----------------------------------------------------------------------*/
#define CFG_HAVE_SDCARD (0)
/*=========================================================================*/
#define CFG_USBMSC (1)
#define CFG_USB_VID (0x239A)
#define CFG_USB_PID (0x1002)
#define CFG_USBCDC (0)
#define CFG_USBCDC_BAUDRATE (115200)
#define CFG_USBCDC_INITTIMEOUT (5000)
#define CFG_USBCDC_BUFFERSIZE (256)
/* you will need these for the UART */
#if 0
#define CFG_INTERFACE_UART (1)
#define CFG_UART_BAUDRATE (115200)
#define CFG_UART_BUFSIZE (512)
#endif