488 lines
19 KiB
C
488 lines
19 KiB
C
/**************************************************************************//**
|
|
* @file system_LPC13xx.c
|
|
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer Source File
|
|
* for the NXP LPC13xx Device Series
|
|
* @version V1.02
|
|
* @date 18. February 2010
|
|
*
|
|
* @note
|
|
* Copyright (C) 2009 ARM Limited. All rights reserved.
|
|
*
|
|
* @par
|
|
* ARM Limited (ARM) is supplying this software for use with Cortex-M
|
|
* processor based microcontrollers. This file can be freely distributed
|
|
* within development tools that are supporting such ARM based processors.
|
|
*
|
|
* @par
|
|
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
|
|
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
|
|
* ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
|
|
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
*
|
|
******************************************************************************/
|
|
|
|
// ******** Code Red **************
|
|
// * Changed USBCLK_SETUP to 1
|
|
// * Changed SYSPLLCTRL_Val to 0x25
|
|
// ********************************
|
|
|
|
#include <stdint.h>
|
|
#include "LPC13xx.h"
|
|
|
|
/*
|
|
//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
|
|
*/
|
|
|
|
/*--------------------- Clock Configuration ----------------------------------
|
|
//
|
|
// <e> Clock Configuration
|
|
// <e1> System Clock Setup
|
|
// <e2> System Oscillator Enable
|
|
// <o3.1> Select System Oscillator Frequency Range
|
|
// <0=> 1 - 20 MHz
|
|
// <1=> 15 - 25 MHz
|
|
// </e2>
|
|
// <e4> Watchdog Oscillator Enable
|
|
// <o5.0..4> Select Divider for Fclkana
|
|
// <0=> 2 <1=> 4 <2=> 6 <3=> 8
|
|
// <4=> 10 <5=> 12 <6=> 14 <7=> 16
|
|
// <8=> 18 <9=> 20 <10=> 22 <11=> 24
|
|
// <12=> 26 <13=> 28 <14=> 30 <15=> 32
|
|
// <16=> 34 <17=> 36 <18=> 38 <19=> 40
|
|
// <20=> 42 <21=> 44 <22=> 46 <23=> 48
|
|
// <24=> 50 <25=> 52 <26=> 54 <27=> 56
|
|
// <28=> 58 <29=> 60 <30=> 62 <31=> 64
|
|
// <o5.5..8> Select Watchdog Oscillator Analog Frequency (Fclkana)
|
|
// <0=> Disabled
|
|
// <1=> 0.5 MHz
|
|
// <2=> 0.8 MHz
|
|
// <3=> 1.1 MHz
|
|
// <4=> 1.4 MHz
|
|
// <5=> 1.6 MHz
|
|
// <6=> 1.8 MHz
|
|
// <7=> 2.0 MHz
|
|
// <8=> 2.2 MHz
|
|
// <9=> 2.4 MHz
|
|
// <10=> 2.6 MHz
|
|
// <11=> 2.7 MHz
|
|
// <12=> 2.9 MHz
|
|
// <13=> 3.1 MHz
|
|
// <14=> 3.2 MHz
|
|
// <15=> 3.4 MHz
|
|
// </e4>
|
|
// <o6> Select Input Clock for sys_pllclkin (Register: SYSPLLCLKSEL)
|
|
// <0=> IRC Oscillator
|
|
// <1=> System Oscillator
|
|
// <2=> WDT Oscillator
|
|
// <3=> Invalid
|
|
// <e7> Use System PLL
|
|
// <i> F_pll = M * F_in
|
|
// <i> F_in must be in the range of 10 MHz to 25 MHz
|
|
// <o8.0..4> M: PLL Multiplier Selection
|
|
// <1-32><#-1>
|
|
// <o8.5..6> P: PLL Divider Selection
|
|
// <0=> 2
|
|
// <1=> 4
|
|
// <2=> 8
|
|
// <3=> 16
|
|
// <o8.7> DIRECT: Direct CCO Clock Output Enable
|
|
// <o8.8> BYPASS: PLL Bypass Enable
|
|
// </e7>
|
|
// <o9> Select Input Clock for Main clock (Register: MAINCLKSEL)
|
|
// <0=> IRC Oscillator
|
|
// <1=> Input Clock to System PLL
|
|
// <2=> WDT Oscillator
|
|
// <3=> System PLL Clock Out
|
|
// </e1>
|
|
// <e10> USB Clock Setup
|
|
// <e11> Use USB PLL
|
|
// <i> F_pll = M * F_in
|
|
// <i> F_in must be in the range of 10 MHz to 25 MHz
|
|
// <o12.0..1> Select Input Clock for usb_pllclkin (Register: USBPLLCLKSEL)
|
|
// <0=> IRC Oscillator
|
|
// <1=> System Oscillator
|
|
// <o13.0..4> M: PLL Multiplier Selection
|
|
// <1-32><#-1>
|
|
// <o13.5..6> P: PLL Divider Selection
|
|
// <0=> 2
|
|
// <1=> 4
|
|
// <2=> 8
|
|
// <3=> 16
|
|
// <o13.7> DIRECT: Direct CCO Clock Output Enable
|
|
// <o13.8> BYPASS: PLL Bypass Enable
|
|
// </e11>
|
|
// </e10>
|
|
// <o14.0..7> System AHB Divider <0-255>
|
|
// <i> 0 = is disabled
|
|
// <o15.0> SYS Clock Enable
|
|
// <o15.1> ROM Clock Enable
|
|
// <o15.2> RAM Clock Enable
|
|
// <o15.3> FLASH1 Clock Enable
|
|
// <o15.4> FLASH2 Clock Enable
|
|
// <o15.5> I2C Clock Enable
|
|
// <o15.6> GPIO Clock Enable
|
|
// <o15.7> CT16B0 Clock Enable
|
|
// <o15.8> CT16B1 Clock Enable
|
|
// <o15.9> CT32B0 Clock Enable
|
|
// <o15.10> CT32B1 Clock Enable
|
|
// <o15.11> SSP Clock Enable
|
|
// <o15.12> UART Clock Enable
|
|
// <o15.13> ADC Clock Enable
|
|
// <o15.14> USB_REG Clock Enable
|
|
// <o15.15> SWDT Clock Enable
|
|
// <o15.16> IOCON Clock Enable
|
|
// </e>
|
|
*/
|
|
#define CLOCK_SETUP 1
|
|
#define SYSCLK_SETUP 1
|
|
#define SYSOSC_SETUP 1
|
|
#define SYSOSCCTRL_Val 0x00000000
|
|
#define WDTOSC_SETUP 0
|
|
#define WDTOSCCTRL_Val 0x000000A0
|
|
#define SYSPLLCLKSEL_Val 0x00000001
|
|
#define SYSPLL_SETUP 1
|
|
#define SYSPLLCTRL_Val 0x00000025
|
|
#define MAINCLKSEL_Val 0x00000003
|
|
|
|
// ******** Code Red *********
|
|
// * Changed USBCLK_SETUP to 1
|
|
// ***************************
|
|
#define USBCLK_SETUP 1
|
|
#define USBPLL_SETUP 1
|
|
#define USBPLLCLKSEL_Val 0x00000001
|
|
#define USBPLLCTRL_Val 0x00000003
|
|
#define SYSAHBCLKDIV_Val 0x00000001
|
|
#define AHBCLKCTRL_Val 0x0001005F
|
|
|
|
/*--------------------- Memory Mapping Configuration -------------------------
|
|
//
|
|
// <e> Memory Mapping
|
|
// <o1.0..1> System Memory Remap (Register: SYSMEMREMAP)
|
|
// <0=> Bootloader mapped to address 0
|
|
// <1=> RAM mapped to address 0
|
|
// <2=> Flash mapped to address 0
|
|
// <3=> Flash mapped to address 0
|
|
// </e>
|
|
*/
|
|
#define MEMMAP_SETUP 0
|
|
#define SYSMEMREMAP_Val 0x00000001
|
|
|
|
/*
|
|
//-------- <<< end of configuration section >>> ------------------------------
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------
|
|
Check the register settings
|
|
*----------------------------------------------------------------------------*/
|
|
#define CHECK_RANGE(val, min, max) ((val < min) || (val > max))
|
|
#define CHECK_RSVD(val, mask) (val & mask)
|
|
|
|
/* Clock Configuration -------------------------------------------------------*/
|
|
#if (CHECK_RSVD((SYSOSCCTRL_Val), ~0x00000003))
|
|
#error "SYSOSCCTRL: Invalid values of reserved bits!"
|
|
#endif
|
|
|
|
#if (CHECK_RSVD((WDTOSCCTRL_Val), ~0x000001FF))
|
|
#error "WDTOSCCTRL: Invalid values of reserved bits!"
|
|
#endif
|
|
|
|
#if (CHECK_RANGE((SYSPLLCLKSEL_Val), 0, 2))
|
|
#error "SYSPLLCLKSEL: Value out of range!"
|
|
#endif
|
|
|
|
#if (CHECK_RSVD((SYSPLLCTRL_Val), ~0x000001FF))
|
|
#error "SYSPLLCTRL: Invalid values of reserved bits!"
|
|
#endif
|
|
|
|
#if (CHECK_RSVD((MAINCLKSEL_Val), ~0x00000003))
|
|
#error "MAINCLKSEL: Invalid values of reserved bits!"
|
|
#endif
|
|
|
|
#if (CHECK_RANGE((USBPLLCLKSEL_Val), 0, 1))
|
|
#error "USBPLLCLKSEL: Value out of range!"
|
|
#endif
|
|
|
|
#if (CHECK_RSVD((USBPLLCTRL_Val), ~0x000001FF))
|
|
#error "USBPLLCTRL: Invalid values of reserved bits!"
|
|
#endif
|
|
|
|
#if (CHECK_RSVD((USBPLLUEN_Val), ~0x00000001))
|
|
#error "USBPLLUEN: Invalid values of reserved bits!"
|
|
#endif
|
|
|
|
#if (CHECK_RANGE((SYSAHBCLKDIV_Val), 0, 255))
|
|
#error "SYSAHBCLKDIV: Value out of range!"
|
|
#endif
|
|
|
|
#if (CHECK_RSVD((AHBCLKCTRL_Val), ~0x0001FFFF))
|
|
#error "AHBCLKCTRL: Invalid values of reserved bits!"
|
|
#endif
|
|
|
|
#if (CHECK_RSVD((SYSMEMREMAP_Val), ~0x00000003))
|
|
#error "SYSMEMREMAP: Invalid values of reserved bits!"
|
|
#endif
|
|
|
|
|
|
/*----------------------------------------------------------------------------
|
|
DEFINES
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
/*----------------------------------------------------------------------------
|
|
Define clocks
|
|
*----------------------------------------------------------------------------*/
|
|
#define __XTAL (12000000UL) /* Oscillator frequency */
|
|
#define __SYS_OSC_CLK ( __XTAL) /* Main oscillator frequency */
|
|
#define __IRC_OSC_CLK (12000000UL) /* Internal RC oscillator frequency */
|
|
|
|
|
|
#define __FREQSEL ((WDTOSCCTRL_Val >> 5) & 0x0F)
|
|
#define __DIVSEL (((WDTOSCCTRL_Val & 0x1F) << 1) + 2)
|
|
|
|
#if (CLOCK_SETUP) /* Clock Setup */
|
|
#if (SYSCLK_SETUP) /* System Clock Setup */
|
|
#if (WDTOSC_SETUP) /* Watchdog Oscillator Setup*/
|
|
#if (__FREQSEL == 0)
|
|
#define __WDT_OSC_CLK ( 400000 / __DIVSEL)
|
|
#elif (__FREQSEL == 1)
|
|
#define __WDT_OSC_CLK ( 500000 / __DIVSEL)
|
|
#elif (__FREQSEL == 2)
|
|
#define __WDT_OSC_CLK ( 800000 / __DIVSEL)
|
|
#elif (__FREQSEL == 3)
|
|
#define __WDT_OSC_CLK (1100000 / __DIVSEL)
|
|
#elif (__FREQSEL == 4)
|
|
#define __WDT_OSC_CLK (1400000 / __DIVSEL)
|
|
#elif (__FREQSEL == 5)
|
|
#define __WDT_OSC_CLK (1600000 / __DIVSEL)
|
|
#elif (__FREQSEL == 6)
|
|
#define __WDT_OSC_CLK (1800000 / __DIVSEL)
|
|
#elif (__FREQSEL == 7)
|
|
#define __WDT_OSC_CLK (2000000 / __DIVSEL)
|
|
#elif (__FREQSEL == 8)
|
|
#define __WDT_OSC_CLK (2200000 / __DIVSEL)
|
|
#elif (__FREQSEL == 9)
|
|
#define __WDT_OSC_CLK (2400000 / __DIVSEL)
|
|
#elif (__FREQSEL == 10)
|
|
#define __WDT_OSC_CLK (2600000 / __DIVSEL)
|
|
#elif (__FREQSEL == 11)
|
|
#define __WDT_OSC_CLK (2700000 / __DIVSEL)
|
|
#elif (__FREQSEL == 12)
|
|
#define __WDT_OSC_CLK (2900000 / __DIVSEL)
|
|
#elif (__FREQSEL == 13)
|
|
#define __WDT_OSC_CLK (3100000 / __DIVSEL)
|
|
#elif (__FREQSEL == 14)
|
|
#define __WDT_OSC_CLK (3200000 / __DIVSEL)
|
|
#else
|
|
#define __WDT_OSC_CLK (3400000 / __DIVSEL)
|
|
#endif
|
|
#else
|
|
#define __WDT_OSC_CLK (1600000 / 2)
|
|
#endif // WDTOSC_SETUP
|
|
|
|
/* sys_pllclkin calculation */
|
|
#if ((SYSPLLCLKSEL_Val & 0x03) == 0)
|
|
#define __SYS_PLLCLKIN (__IRC_OSC_CLK)
|
|
#elif ((SYSPLLCLKSEL_Val & 0x03) == 1)
|
|
#define __SYS_PLLCLKIN (__SYS_OSC_CLK)
|
|
#elif ((SYSPLLCLKSEL_Val & 0x03) == 2)
|
|
#define __SYS_PLLCLKIN (__WDT_OSC_CLK)
|
|
#else
|
|
#define __SYS_PLLCLKIN (0)
|
|
#endif
|
|
|
|
#if (SYSPLL_SETUP) /* System PLL Setup */
|
|
#define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * ((SYSPLLCTRL_Val & 0x01F) + 1))
|
|
#else
|
|
#define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * (1))
|
|
#endif // SYSPLL_SETUP
|
|
|
|
/* main clock calculation */
|
|
#if ((MAINCLKSEL_Val & 0x03) == 0)
|
|
#define __MAIN_CLOCK (__IRC_OSC_CLK)
|
|
#elif ((MAINCLKSEL_Val & 0x03) == 1)
|
|
#define __MAIN_CLOCK (__SYS_PLLCLKIN)
|
|
#elif ((MAINCLKSEL_Val & 0x03) == 2)
|
|
#define __MAIN_CLOCK (__WDT_OSC_CLK)
|
|
#elif ((MAINCLKSEL_Val & 0x03) == 3)
|
|
#define __MAIN_CLOCK (__SYS_PLLCLKOUT)
|
|
#else
|
|
#define __MAIN_CLOCK (0)
|
|
#endif
|
|
|
|
#define __SYSTEM_CLOCK (__MAIN_CLOCK / SYSAHBCLKDIV_Val)
|
|
|
|
#else // SYSCLK_SETUP
|
|
#if (SYSAHBCLKDIV_Val == 0)
|
|
#define __SYSTEM_CLOCK (0)
|
|
#else
|
|
#define __SYSTEM_CLOCK (__XTAL / SYSAHBCLKDIV_Val)
|
|
#endif
|
|
#endif // SYSCLK_SETUP
|
|
|
|
#else
|
|
#define __SYSTEM_CLOCK (__XTAL)
|
|
#endif // CLOCK_SETUP
|
|
|
|
|
|
/*----------------------------------------------------------------------------
|
|
Clock Variable definitions
|
|
*----------------------------------------------------------------------------*/
|
|
uint32_t SystemCoreClock = __SYSTEM_CLOCK;/*!< System Clock Frequency (Core Clock)*/
|
|
|
|
|
|
/*----------------------------------------------------------------------------
|
|
Clock functions
|
|
*----------------------------------------------------------------------------*/
|
|
void SystemCoreClockUpdate (void) /* Get Core Clock Frequency */
|
|
{
|
|
uint32_t wdt_osc = 0;
|
|
|
|
/* Determine clock frequency according to clock register values */
|
|
switch ((LPC_SYSCON->WDTOSCCTRL >> 5) & 0x0F) {
|
|
case 0: wdt_osc = 400000; break;
|
|
case 1: wdt_osc = 500000; break;
|
|
case 2: wdt_osc = 800000; break;
|
|
case 3: wdt_osc = 1100000; break;
|
|
case 4: wdt_osc = 1400000; break;
|
|
case 5: wdt_osc = 1600000; break;
|
|
case 6: wdt_osc = 1800000; break;
|
|
case 7: wdt_osc = 2000000; break;
|
|
case 8: wdt_osc = 2200000; break;
|
|
case 9: wdt_osc = 2400000; break;
|
|
case 10: wdt_osc = 2600000; break;
|
|
case 11: wdt_osc = 2700000; break;
|
|
case 12: wdt_osc = 2900000; break;
|
|
case 13: wdt_osc = 3100000; break;
|
|
case 14: wdt_osc = 3200000; break;
|
|
case 15: wdt_osc = 3400000; break;
|
|
}
|
|
wdt_osc /= ((LPC_SYSCON->WDTOSCCTRL & 0x1F) << 1) + 2;
|
|
|
|
switch (LPC_SYSCON->MAINCLKSEL & 0x03) {
|
|
case 0: /* Internal RC oscillator */
|
|
SystemCoreClock = __IRC_OSC_CLK;
|
|
break;
|
|
case 1: /* Input Clock to System PLL */
|
|
switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
|
|
case 0: /* Internal RC oscillator */
|
|
SystemCoreClock = __IRC_OSC_CLK;
|
|
break;
|
|
case 1: /* System oscillator */
|
|
SystemCoreClock = __SYS_OSC_CLK;
|
|
break;
|
|
case 2: /* WDT Oscillator */
|
|
SystemCoreClock = wdt_osc;
|
|
break;
|
|
case 3: /* Reserved */
|
|
SystemCoreClock = 0;
|
|
break;
|
|
}
|
|
break;
|
|
case 2: /* WDT Oscillator */
|
|
SystemCoreClock = wdt_osc;
|
|
break;
|
|
case 3: /* System PLL Clock Out */
|
|
switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
|
|
case 0: /* Internal RC oscillator */
|
|
if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
|
|
SystemCoreClock = __IRC_OSC_CLK;
|
|
} else {
|
|
SystemCoreClock = __IRC_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
|
|
}
|
|
break;
|
|
case 1: /* System oscillator */
|
|
if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
|
|
SystemCoreClock = __SYS_OSC_CLK;
|
|
} else {
|
|
SystemCoreClock = __SYS_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
|
|
}
|
|
break;
|
|
case 2: /* WDT Oscillator */
|
|
if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
|
|
SystemCoreClock = wdt_osc;
|
|
} else {
|
|
SystemCoreClock = wdt_osc * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
|
|
}
|
|
break;
|
|
case 3: /* Reserved */
|
|
SystemCoreClock = 0;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
|
|
SystemCoreClock /= LPC_SYSCON->SYSAHBCLKDIV;
|
|
|
|
}
|
|
|
|
/**
|
|
* Initialize the system
|
|
*
|
|
* @param none
|
|
* @return none
|
|
*
|
|
* @brief Setup the microcontroller system.
|
|
* Initialize the System.
|
|
*/
|
|
void SystemInit (void)
|
|
{
|
|
#if (CLOCK_SETUP) /* Clock Setup */
|
|
#if (SYSCLK_SETUP) /* System Clock Setup */
|
|
#if (SYSOSC_SETUP) /* System Oscillator Setup */
|
|
uint32_t i;
|
|
|
|
LPC_SYSCON->PDRUNCFG &= ~(1 << 5); /* Power-up System Osc */
|
|
LPC_SYSCON->SYSOSCCTRL = SYSOSCCTRL_Val;
|
|
for (i = 0; i < 200; i++) __NOP();
|
|
LPC_SYSCON->SYSPLLCLKSEL = SYSPLLCLKSEL_Val; /* Select PLL Input */
|
|
LPC_SYSCON->SYSPLLCLKUEN = 0x01; /* Update Clock Source */
|
|
LPC_SYSCON->SYSPLLCLKUEN = 0x00; /* Toggle Update Register */
|
|
LPC_SYSCON->SYSPLLCLKUEN = 0x01;
|
|
while (!(LPC_SYSCON->SYSPLLCLKUEN & 0x01)); /* Wait Until Updated */
|
|
#if (SYSPLL_SETUP) /* System PLL Setup */
|
|
LPC_SYSCON->SYSPLLCTRL = SYSPLLCTRL_Val;
|
|
LPC_SYSCON->PDRUNCFG &= ~(1 << 7); /* Power-up SYSPLL */
|
|
while (!(LPC_SYSCON->SYSPLLSTAT & 0x01)); /* Wait Until PLL Locked */
|
|
#endif
|
|
#endif
|
|
#if (WDTOSC_SETUP) /* Watchdog Oscillator Setup*/
|
|
LPC_SYSCON->WDTOSCCTRL = WDTOSCCTRL_Val;
|
|
LPC_SYSCON->PDRUNCFG &= ~(1 << 6); /* Power-up WDT Clock */
|
|
#endif
|
|
LPC_SYSCON->MAINCLKSEL = MAINCLKSEL_Val; /* Select PLL Clock Output */
|
|
LPC_SYSCON->MAINCLKUEN = 0x01; /* Update MCLK Clock Source */
|
|
LPC_SYSCON->MAINCLKUEN = 0x00; /* Toggle Update Register */
|
|
LPC_SYSCON->MAINCLKUEN = 0x01;
|
|
while (!(LPC_SYSCON->MAINCLKUEN & 0x01)); /* Wait Until Updated */
|
|
#endif
|
|
|
|
#if (USBCLK_SETUP) /* USB Clock Setup */
|
|
LPC_SYSCON->PDRUNCFG &= ~(1 << 10); /* Power-up USB PHY */
|
|
#if (USBPLL_SETUP) /* USB PLL Setup */
|
|
LPC_SYSCON->PDRUNCFG &= ~(1 << 8); /* Power-up USB PLL */
|
|
LPC_SYSCON->USBPLLCLKSEL = USBPLLCLKSEL_Val; /* Select PLL Input */
|
|
LPC_SYSCON->USBPLLCLKUEN = 0x01; /* Update Clock Source */
|
|
LPC_SYSCON->USBPLLCLKUEN = 0x00; /* Toggle Update Register */
|
|
LPC_SYSCON->USBPLLCLKUEN = 0x01;
|
|
while (!(LPC_SYSCON->USBPLLCLKUEN & 0x01)); /* Wait Until Updated */
|
|
LPC_SYSCON->USBPLLCTRL = USBPLLCTRL_Val;
|
|
while (!(LPC_SYSCON->USBPLLSTAT & 0x01)); /* Wait Until PLL Locked */
|
|
LPC_SYSCON->USBCLKSEL = 0x00; /* Select USB PLL */
|
|
#else
|
|
LPC_SYSCON->USBCLKSEL = 0x01; /* Select Main Clock */
|
|
#endif
|
|
#else
|
|
LPC_SYSCON->PDRUNCFG |= (1 << 10); /* Power-down USB PHY */
|
|
LPC_SYSCON->PDRUNCFG |= (1 << 8); /* Power-down USB PLL */
|
|
#endif
|
|
|
|
LPC_SYSCON->SYSAHBCLKDIV = SYSAHBCLKDIV_Val;
|
|
LPC_SYSCON->SYSAHBCLKCTRL = AHBCLKCTRL_Val;
|
|
#endif
|
|
|
|
|
|
#if (MEMMAP_SETUP || MEMMAP_INIT) /* Memory Mapping Setup */
|
|
LPC_SYSCON->SYSMEMREMAP = SYSMEMREMAP_Val;
|
|
#endif
|
|
}
|