176 lines
4.8 KiB
C
176 lines
4.8 KiB
C
#ifndef _NRF24L01P_H
|
|
#define _NRF24L01P_H 1
|
|
#include <stdint.h>
|
|
|
|
#define MAX_PKT (32) // space for crc is supplied by the caller
|
|
|
|
// SPI commands
|
|
#define C_R_REGISTER 0x00
|
|
#define C_W_REGISTER 0x20
|
|
#define C_R_RX_PAYLOAD 0x61
|
|
#define C_W_TX_PAYLOAD 0xA0
|
|
#define C_FLUSH_TX 0xE1
|
|
#define C_FLUSH_RX 0xE2
|
|
#define C_REUSE_TX_PL 0xE3
|
|
#define C_R_RX_PL_WID 0x60
|
|
#define C_W_ACK_PAYLOAD 0xA8
|
|
#define C_W_TX_PAYLOAD_NOCACK 0xB0
|
|
#define C_NOP 0xFF
|
|
|
|
// Registers
|
|
#define R_CONFIG 0x00
|
|
#define R_EN_AA 0x01
|
|
#define R_EN_RXADDR 0x02
|
|
#define R_SETUP_AW 0x03
|
|
#define R_SETUP_RETR 0x04
|
|
#define R_RF_CH 0x05
|
|
#define R_RF_SETUP 0x06
|
|
#define R_STATUS 0x07
|
|
#define R_OBSERVE_TX 0x08
|
|
#define R_RPD 0x09
|
|
#define R_RX_ADDR_P0 0x0A
|
|
#define R_RX_ADDR_P0_LEN 5
|
|
#define R_RX_ADDR_P1 0x0B
|
|
#define R_RX_ADDR_P1_LEN 5
|
|
#define R_RX_ADDR_P2 0x0C
|
|
#define R_RX_ADDR_P2_LEN 1
|
|
#define R_RX_ADDR_P3 0x0D
|
|
#define R_RX_ADDR_P3_LEN 1
|
|
#define R_RX_ADDR_P4 0x0E
|
|
#define R_RX_ADDR_P4_LEN 1
|
|
#define R_RX_ADDR_P5 0x0F
|
|
#define R_RX_ADDR_P5_LEN 1
|
|
#define R_TX_ADDR 0x10
|
|
#define R_TX_ADDR_LEN 5
|
|
#define R_RX_PW_P0 0x11
|
|
#define R_RX_PW_P1 0x12
|
|
#define R_RX_PW_P2 0x13
|
|
#define R_RX_PW_P3 0x14
|
|
#define R_RX_PW_P4 0x15
|
|
#define R_RX_PW_P5 0x16
|
|
#define R_FIFO_STATUS 0x17
|
|
#define R_DYNPD 0x1c
|
|
|
|
// Register Flags
|
|
|
|
//CONFIG register definitions
|
|
#define R_CONFIG_RESERVED 0x80
|
|
#define R_CONFIG_MASK_RX_DR 0x40
|
|
#define R_CONFIG_MASK_TX_DS 0x20
|
|
#define R_CONFIG_MASK_MAX_RT 0x10
|
|
#define R_CONFIG_EN_CRC 0x08
|
|
#define R_CONFIG_CRCO 0x04
|
|
#define R_CONFIG_PWR_UP 0x02
|
|
#define R_CONFIG_PRIM_RX 0x01
|
|
|
|
//EN_AA register definitions
|
|
#define R_EN_AA_ENAA_P5 0x20
|
|
#define R_EN_AA_ENAA_P4 0x10
|
|
#define R_EN_AA_ENAA_P3 0x08
|
|
#define R_EN_AA_ENAA_P2 0x04
|
|
#define R_EN_AA_ENAA_P1 0x02
|
|
#define R_EN_AA_ENAA_P0 0x01
|
|
#define R_EN_AA_ENAA_NONE 0x00
|
|
|
|
//EN_RXADDR register definitions
|
|
#define R_EN_RXADDR_ERX_P5 0x20
|
|
#define R_EN_RXADDR_ERX_P4 0x10
|
|
#define R_EN_RXADDR_ERX_P3 0x08
|
|
#define R_EN_RXADDR_ERX_P2 0x04
|
|
#define R_EN_RXADDR_ERX_P1 0x02
|
|
#define R_EN_RXADDR_ERX_P0 0x01
|
|
#define R_EN_RXADDR_ERX_NONE 0x00
|
|
|
|
// RF_CH register definitions
|
|
#define R_RF_CH_BITS 0x7f
|
|
|
|
//RF_SETUP register definitions
|
|
#define R_RF_SETUP_CONT_WAVE 0x80
|
|
#define R_RF_SETUP_RF_DR_LOW 0x20
|
|
#define R_RF_SETUP_PLL_LOCK 0x10
|
|
#define R_RF_SETUP_RF_DR_HIGH 0x08
|
|
#define R_RF_SETUP_RF_PWR_0 0x00
|
|
#define R_RF_SETUP_RF_PWR_1 0x02
|
|
#define R_RF_SETUP_RF_PWR_2 0x04
|
|
#define R_RF_SETUP_RF_PWR_3 0x06
|
|
|
|
#define R_RF_SETUP_DR_1M 0x00
|
|
#define R_RF_SETUP_DR_2M 0x08
|
|
#define R_RF_SETUP_DR_250K 0x20
|
|
|
|
//SETUP_AW register definitions
|
|
#define R_SETUP_AW_3 0x01
|
|
#define R_SETUP_AW_4 0x02
|
|
#define R_SETUP_AW_5 0x03
|
|
|
|
//STATUS register definitions
|
|
#define R_STATUS_RX_DR 0x40
|
|
#define R_STATUS_TX_DS 0x20
|
|
#define R_STATUS_MAX_RT 0x10
|
|
#define R_STATUS_RX_P_NO 0x0E
|
|
#define R_STATUS_GET_RX_P_NO(x) ((x&R_STATUS_RX_P_NO)>>1)
|
|
#define R_STATUS_RX_FIFO_EMPTY 0x0E
|
|
#define R_STATUS_TX_FULL 0x01
|
|
|
|
/* config structure */
|
|
|
|
struct NRF_CFG {
|
|
uint8_t channel;
|
|
uint8_t txmac[5];
|
|
uint8_t mac0[5];
|
|
uint8_t mac1[5];
|
|
uint8_t mac2345[4];
|
|
uint8_t nrmacs;
|
|
uint8_t maclen[5];
|
|
};
|
|
|
|
typedef struct NRF_CFG * nrfconfig;
|
|
|
|
|
|
/* exported functions */
|
|
#define nrf_rcv_pkt_time(maxtime, maxsize, pkt) \
|
|
nrf_rcv_pkt_time_encr(maxtime, maxsize, pkt, NULL)
|
|
|
|
int nrf_rcv_pkt_time_encr(int maxtime, int maxsize, uint8_t * pkt, uint32_t const k[4]);
|
|
|
|
#define nrf_snd_pkt_crc(size, pkt) \
|
|
nrf_snd_pkt_crc_encr(size, pkt, NULL)
|
|
char nrf_snd_pkt_crc_encr(int size, uint8_t * pkt, uint32_t const k[4]);
|
|
|
|
void nrf_init() ;
|
|
void nrf_off() ;
|
|
void nrf_startCW();
|
|
|
|
void nrf_cmd(uint8_t cmd);
|
|
uint8_t nrf_cmd_status(uint8_t cmd);
|
|
void nrf_cmd_rw_long(uint8_t* data, int len);
|
|
void nrf_read_long(const uint8_t reg, int len, uint8_t* data);
|
|
void nrf_write_reg(const uint8_t reg, const uint8_t val);
|
|
uint8_t nrf_read_reg(const uint8_t reg);
|
|
void nrf_write_long(const uint8_t cmd, int len, const uint8_t* data);
|
|
|
|
void nrf_set_rx_mac(int pipe, int rxlen, int maclen, const uint8_t * mac);
|
|
void nrf_set_tx_mac(int maclen, const uint8_t * mac);
|
|
void nrf_disable_pipe(int pipe);
|
|
void nrf_set_channel(int channel);
|
|
|
|
void nrf_config_set(nrfconfig config);
|
|
void nrf_config_get(nrfconfig config);
|
|
|
|
void nrf_set_strength(unsigned char strength);
|
|
|
|
// new receive IF
|
|
void nrf_rcv_pkt_start(void);
|
|
int nrf_rcv_pkt_poll(int maxsize, uint8_t * pkt);
|
|
int nrf_rcv_pkt_poll_dec(int maxsize, uint8_t * pkt, uint32_t const key[4]);
|
|
|
|
// more utility.
|
|
void nrf_rcv_pkt_end(void);
|
|
void nrf_check_reset(void);
|
|
extern uint8_t _nrfresets;
|
|
|
|
/* END */
|
|
|
|
#endif /* _NRF24L01P_H */
|
|
|