crashtest-r0ket/core/timer32/timer32.c

345 lines
11 KiB
C
Raw Normal View History

2011-05-15 11:27:49 +00:00
/**************************************************************************/
/*!
@file timer32.c
@author K. Townsend (microBuilder.eu)
@date 22 March 2010
@version 0.10
@section DESCRIPTION
Generic code for 32-bit timers. By default, the timers are configured
to generate an interrupt once every 100 microseconds, incrementing a
global variable once per tick.
@warning Please note that the ROM-based USB drivers on the LPC1343
require the use of 32-bit Timer 1. If you plan on using the
ROM-based USB functionality, you should restrict your timer
usage to 32-bit timer 0.
@section Example
@code
#include "/core/cpu/cpu.h"
#include "/core/timer32/timer32.h"
...
cpuInit();
// Initialise 32-bit timer 0 with 100uS ticks
timer32Init(0, TIMER32_DEFAULTINTERVAL);
// Enable timer 0
timer32Enable(0);
// Cause a blocking delay for 1 second (1000mS)
timer32Delay(0, TIMER32_DELAY_1MS * 1000);
@endcode
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2010, microBuilder SARL
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**************************************************************************/
#include "timer32.h"
volatile uint32_t timer32_0_counter = 0;
volatile uint32_t timer32_1_counter = 0;
/**************************************************************************/
/*!
@brief Causes a blocking delay for the specified number of
timer ticks. The duration of each 'tick' is determined by
the 'timerInterval' property supplied to timer32Init.
@param[in] timerNum
The 32-bit timer to user (0..1)
@param[in] delay
The number of counter increments to wait
*/
/**************************************************************************/
void timer32Delay(uint8_t timerNum, uint32_t delay)
{
uint32_t curTicks;
if (timerNum == 0)
{
curTicks = timer32_0_counter;
if (curTicks > 0xFFFFFFFF - delay)
{
// Rollover will occur during delay
while (timer32_0_counter >= curTicks)
{
while (timer32_0_counter < (delay - (0xFFFFFFFF - curTicks)));
}
}
else
{
while ((timer32_0_counter - curTicks) < delay);
}
}
else if (timerNum == 1)
{
curTicks = timer32_1_counter;
if (curTicks > 0xFFFFFFFF - delay)
{
// Rollover will occur during delay
while (timer32_1_counter >= curTicks)
{
while (timer32_1_counter < (delay - (0xFFFFFFFF - curTicks)));
}
}
else
{
while ((timer32_1_counter - curTicks) < delay);
}
}
return;
}
/**************************************************************************/
/*!
@brief Interrupt handler for 32-bit timer 0
*/
/**************************************************************************/
void TIMER32_0_IRQHandler(void)
{
/* Clear the interrupt flag */
TMR_TMR32B0IR = TMR_TMR32B0IR_MR0;
/* If you wish to perform some action after each timer 'tick' (such as
incrementing a counter variable) you can do so here */
timer32_0_counter++;
return;
}
/**************************************************************************/
/*!
@brief Interrupt handler for 32-bit timer 1
*/
/**************************************************************************/
void TIMER32_1_IRQHandler(void)
{
/* Clear the interrupt flag */
TMR_TMR32B1IR = TMR_TMR32B1IR_MR0;
/* If you wish to perform some action after each timer 'tick' (such as
incrementing a counter variable) you can do so here */
timer32_1_counter++;
return;
}
/**************************************************************************/
/*!
@brief Enables the specified timer
@param[in] timerNum
The 32-bit timer to enable (0..1)
*/
/**************************************************************************/
void timer32Enable(uint8_t timerNum)
{
if ( timerNum == 0 )
{
TMR_TMR32B0TCR = TMR_TMR32B0TCR_COUNTERENABLE_ENABLED;
}
else if (timerNum == 1)
{
TMR_TMR32B1TCR = TMR_TMR32B1TCR_COUNTERENABLE_ENABLED;
}
return;
}
/**************************************************************************/
/*!
@brief Disables the specified timer
@param[in] timerNum
The 32-bit timer to disable (0..1)
*/
/**************************************************************************/
void timer32Disable(uint8_t timerNum)
{
if ( timerNum == 0 )
{
TMR_TMR32B0TCR = TMR_TMR32B0TCR_COUNTERENABLE_DISABLED;
}
else if (timerNum == 1)
{
TMR_TMR32B1TCR = TMR_TMR32B1TCR_COUNTERENABLE_DISABLED;
}
return;
}
/**************************************************************************/
/*!
@brief Resets the specified timer
@param[in] timerNum
The 32-bit timer to reset (0..1)
*/
/**************************************************************************/
void timer32Reset(uint8_t timerNum)
{
uint32_t regVal;
if ( timerNum == 0 )
{
regVal = TMR_TMR32B0TCR;
regVal |= TMR_TMR32B0TCR_COUNTERRESET_ENABLED;
TMR_TMR32B0TCR = regVal;
}
else if (timerNum == 1)
{
regVal = TMR_TMR32B1TCR;
regVal |= TMR_TMR32B1TCR_COUNTERRESET_ENABLED;
TMR_TMR32B1TCR = regVal;
}
return;
}
/**************************************************************************/
/*!
@brief Initialises the specified 32-bit timer, and configures the
timer to raise an interrupt and reset on match on MR0.
@param[in] timerNum
The 32-bit timer to initiliase (0..1)
@param[in] timerInterval
The number of clock 'ticks' between resets (0..0xFFFFFFFF)
@note Care needs to be taken when configuring the timers since the
pins are all multiplexed with other peripherals. This code is
provided as a starting point, but it will need to be adjusted
according to your own situation and pin/peripheral requirements
*/
/**************************************************************************/
void timer32Init(uint8_t timerNum, uint32_t timerInterval)
{
// If timerInterval is invalid, use the default value
if (timerInterval < 1)
{
timerInterval = TIMER32_DEFAULTINTERVAL;
}
if ( timerNum == 0 )
{
/* Enable the clock for CT32B0 */
SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT32B0);
/* The physical pins associated with CT32B0 are not enabled by
default in order to avoid conflicts with other peripherals. If
you wish to use any of the pin-dependant functionality, simply
uncomment the appropriate lines below. */
/* Configure PIO1.5 as Timer0_32 CAP0 */
// IOCON_PIO1_5 &= ~IOCON_PIO1_5_FUNC_MASK;
// IOCON_PIO1_5 |= IOCON_PIO1_5_FUNC_CT32B0_CAP0;
/* Configure PIO1.6 as Timer0_32 MAT0 */
// IOCON_PIO1_6 &= ~IOCON_PIO1_6_FUNC_MASK;
// IOCON_PIO1_6 |= IOCON_PIO1_6_FUNC_CT32B0_MAT0;
/* Configure PIO1.7 as Timer0_32 MAT1 */
// IOCON_PIO1_7 &= ~IOCON_PIO1_7_FUNC_MASK;
// IOCON_PIO1_7 |= IOCON_PIO1_7_FUNC_CT32B0_MAT1;
/* Configure PIO0.1 as Timer0_32 MAT2 */
// IOCON_PIO0_1 &= ~IOCON_PIO0_1_FUNC_MASK;
// IOCON_PIO0_1 |= IOCON_PIO0_1_FUNC_CT32B0_MAT2;
/* Configure PIO0.11 as Timer0_32 MAT3 */
/* Note: This pint can not be used with JTAG/SWD */
// IOCON_JTAG_TDI_PIO0_11 &= ~IOCON_JTAG_TDI_PIO0_11_FUNC_MASK;
// IOCON_JTAG_TDI_PIO0_11 |= IOCON_JTAG_TDI_PIO0_11_FUNC_CT32B0_MAT3;
timer32_0_counter = 0;
TMR_TMR32B0MR0 = timerInterval;
/* Configure match control register to raise an interrupt and reset on MR0 */
TMR_TMR32B0MCR = (TMR_TMR32B0MCR_MR0_INT_ENABLED | TMR_TMR32B0MCR_MR0_RESET_ENABLED);
/* Enable the TIMER0 interrupt */
NVIC_EnableIRQ(TIMER_32_0_IRQn);
}
else if ( timerNum == 1 )
{
/* Enable the clock for CT32B1 */
SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT32B1);
/* The physical pins associated with CT32B0 are not enabled by
default in order to avoid conflicts with other peripherals. */
/* Configure PIO1.0 as Timer1_32 CAP0 */
/* Note: This pint can not be used with JTAG/SWD */
// IOCON_JTAG_TMS_PIO1_0 &= ~IOCON_JTAG_TMS_PIO1_0_FUNC_MASK;
// IOCON_JTAG_TMS_PIO1_0 |= IOCON_JTAG_TMS_PIO1_0_FUNC_CT32B1_CAP0;
/* Configure PIO1.1 as Timer1_32 MAT0 */
/* Note: This pint can not be used with JTAG/SWD */
// IOCON_JTAG_TDO_PIO1_1 &= ~IOCON_JTAG_TDO_PIO1_1_FUNC_MASK;
// IOCON_JTAG_TDO_PIO1_1 |= IOCON_JTAG_TDO_PIO1_1_FUNC_CT32B1_MAT0;
/* Configure PIO1.2 as Timer1_32 MAT1 */
/* Note: This pint can not be used with JTAG/SWD */
// IOCON_JTAG_nTRST_PIO1_2 &= ~IOCON_JTAG_nTRST_PIO1_2_FUNC_MASK;
// IOCON_JTAG_nTRST_PIO1_2 |= IOCON_JTAG_nTRST_PIO1_2_FUNC_CT32B1_MAT1;
/* Configure PIO1.3 as Timer1_32 MAT2 */
/* Note: This pint can not be used with JTAG/SWD */
// IOCON_SWDIO_PIO1_3 &= ~IOCON_SWDIO_PIO1_3_FUNC_MASK;
// IOCON_SWDIO_PIO1_3 |= IOCON_SWDIO_PIO1_3_FUNC_CT32B1_MAT2;
/* Configure PIO1.4 as Timer1_32 MAT3 */
// IOCON_PIO1_4 &= ~IOCON_PIO1_4_FUNC_MASK;
// IOCON_PIO1_4 |= IOCON_PIO1_4_FUNC_CT32B1_MAT3;
timer32_1_counter = 0;
TMR_TMR32B1MR0 = timerInterval;
/* Configure match control register to raise an interrupt and reset on MR0 */
TMR_TMR32B1MCR = (TMR_TMR32B1MCR_MR0_INT_ENABLED | TMR_TMR32B1MCR_MR0_RESET_ENABLED);
/* Enable the TIMER1 Interrupt */
NVIC_EnableIRQ(TIMER_32_1_IRQn);
}
return;
}