crashtest-r0ket/misc/openbeacon/lpc13xx/uart/inc/config.h

44 lines
1.5 KiB
C
Raw Normal View History

2011-06-12 02:18:11 +00:00
/*****************************************************************************
* config.h: config file for uart example for NXP LPC13xx Family
* Microprocessors
*
* Copyright(C) 2008, NXP Semiconductor
* All rights reserved.
*
* History
* 2008.07.19 ver 1.00 Preliminary version, first Release
*
******************************************************************************/
/*
Overview:
This example shows how to use a timer to blink an LED. It works by using
libLPC to configure a I/O port and a 32-bit timer, then setting up a timer
interrupt to increment a counter. The main loop polls the counter to
determine when to toggle the LED state.
User #defines:
LED_PORT I/O port driving an LED
LED_BIT I/O port bit driving an LED
LED_ON Value to set the bit to turn on the LED
LED_OFF Value to set the bit to turn off the LED
LED_TOGGLE_TICKS
Number of timer ticks per flash. The timer is configured to generate
an interrupt 100 times a second or every 10mS.
How to use:
Click the debug toolbar button.
* You should see an LED flashing.
*/
#define LED_PORT 1 // Port for led
#define LED_BIT 9 // Bit on port for led
#define LED_ON 1 // Level to set port to turn on led
#define LED_OFF 0 // Level to set port to turn off led
#define LED_TOGGLE_TICKS 100 // 100 ticks = 1 Hz flash rate
/*********************************************************************************
** End Of File
*********************************************************************************/