166 lines
4.3 KiB
C
166 lines
4.3 KiB
C
/**** RFM 12 library for Atmel AVR Microcontrollers *******
|
|
*
|
|
* This software is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published
|
|
* by the Free Software Foundation; either version 2 of the License,
|
|
* or (at your option) any later version.
|
|
*
|
|
* This software is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this software; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
|
|
* USA.
|
|
*
|
|
* @author Peter Fuhrmann, Hans-Gert Dahmen, Soeren Heisrath
|
|
*/
|
|
|
|
/******************************************************
|
|
* *
|
|
* C O N F I G U R A T I O N *
|
|
* *
|
|
******************************************************/
|
|
|
|
/*
|
|
Connect the RFM12 to the AVR as follows:
|
|
|
|
RFM12 | AVR
|
|
----------------+------------
|
|
SDO | MISO
|
|
nIRQ | INT0
|
|
FSK/DATA/nFFS | VCC
|
|
DCLK/CFIL/FFIT | -
|
|
CLK | -
|
|
nRES | -
|
|
GND | GND
|
|
ANT | -
|
|
VDD | VCC
|
|
GND | GND
|
|
nINT/VDI | -
|
|
SDI | MOSI
|
|
SCK | SCK
|
|
nSEL | Slave select pin defined below
|
|
*/
|
|
|
|
|
|
#include "../config.h"
|
|
#include "../makros.h"
|
|
|
|
//Pin that the RFM12's slave select is connected to
|
|
//#define DDR_SS DDRB
|
|
//#define PORT_SS PORTB
|
|
//#define BIT_SS PB4
|
|
|
|
#define DDR_SS DDR(PORT_SS)
|
|
|
|
//SPI port
|
|
//#define DDR_SPI DDRB
|
|
|
|
#define DDR_SPI DDR(PORT_SPI)
|
|
|
|
//#define PORT_SPI PORTB
|
|
//#define PIN_SPI PINB
|
|
//#define BIT_MOSI 5
|
|
//#define BIT_MISO 6
|
|
//#define BIT_SCK 7
|
|
//#define BIT_SPI_SS 4
|
|
//this is the hardware SS pin of the AVR - it
|
|
//needs to be set to output for the spi-interface to work
|
|
//correctly, independently of the CS pin used for the RFM12
|
|
|
|
|
|
/************************
|
|
* RFM12 CONFIGURATION OPTIONS
|
|
*/
|
|
|
|
//baseband of the module (either RFM12_BAND_433, RFM12_BAND_868 or RFM12_BAND_912)
|
|
#define RFM12_BASEBAND RFM12_BAND_433
|
|
|
|
//center frequency to use (+- FSK frequency shift)
|
|
#define RFM12_FREQUENCY 433000000UL
|
|
|
|
//FSK frequency shift in kHz
|
|
#define FSK_SHIFT 45000
|
|
|
|
//Receive RSSI Threshold
|
|
#define RFM12_RSSI_THRESHOLD RFM12_RXCTRL_RSSI_79
|
|
|
|
//Receive Filter Bandwidth
|
|
#define RFM12_FILTER_BW RFM12_RXCTRL_BW_134
|
|
|
|
//Output power relative to maximum (0dB is maximum)
|
|
#define RFM12_POWER RFM12_TXCONF_POWER_0
|
|
|
|
//Receive LNA gain
|
|
#define RFM12_LNA_GAIN RFM12_RXCTRL_LNA_6
|
|
|
|
//crystal load capacitance - the frequency can be verified by measuring the
|
|
//clock output of RFM12 and comparing to 1MHz.
|
|
//11.5pF seems to be o.k. for RFM12, and 10.5pF for RFM12BP, but this may vary.
|
|
#define RFM12_XTAL_LOAD RFM12_XTAL_11_5PF
|
|
|
|
//use this for datarates >= 2700 Baud
|
|
#define DATARATE_VALUE RFM12_DATARATE_CALC_HIGH(9600.0)
|
|
|
|
//use this for 340 Baud < datarate < 2700 Baud
|
|
//#define DATARATE_VALUE RFM12_DATARATE_CALC_LOW(1200.0)
|
|
|
|
//TX BUFFER SIZE
|
|
#define RFM12_TX_BUFFER_SIZE 10
|
|
|
|
//RX BUFFER SIZE (there are going to be 2 Buffers of this size for double_buffering)
|
|
#define RFM12_RX_BUFFER_SIZE 10
|
|
|
|
|
|
/************************
|
|
* INTERRUPT VECTOR
|
|
* set the name for the interrupt vector here
|
|
*/
|
|
|
|
//the interrupt vector
|
|
#define RFM12_INT_VECT (INT0_vect)
|
|
|
|
//the interrupt mask register
|
|
#define RFM12_INT_MSK GIMSK
|
|
|
|
//the interrupt bit in the mask register
|
|
#define RFM12_INT_BIT (INT0)
|
|
|
|
//the interrupt flag register
|
|
#define RFM12_INT_FLAG GIFR
|
|
|
|
//the interrupt bit in the flag register
|
|
#define RFM12_FLAG_BIT (INTF0)
|
|
|
|
//setup the interrupt to trigger on negative edge
|
|
#define RFM12_INT_SETUP() MCUCR |= (1 << ISC01)
|
|
|
|
|
|
/************************
|
|
* FEATURE CONFIGURATION
|
|
*/
|
|
|
|
#define RFM12_LOW_BATT_DETECTOR 0
|
|
#define RFM12_USE_WAKEUP_TIMER 0
|
|
#define RFM12_TRANSMIT_ONLY 0
|
|
#define RFM12_SPI_SOFTWARE 0
|
|
|
|
//setup the low battery detector to 2.2v
|
|
//Vlb = 2.2 + (val * 0.1)
|
|
//hint: minimum measured supply voltage is 1.98V !
|
|
|
|
#define RFM12_LBD_VOLTAGE RFM12_LBD_VOLTAGE_2V2
|
|
|
|
|
|
/**** UART DEBUGGING
|
|
* en- or disable debugging via uart.
|
|
*/
|
|
#define RFM12_UART_DEBUG 0
|
|
|
|
|
|
|
|
|