moved new servo display code accordingly
This commit is contained in:
Lucas Pleß
parent
ee549b25f3
commit
ed8753a873
|
|
@ -0,0 +1,276 @@
|
|||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make program = Download the hex file to the device, using avrdude. Please
|
||||
# customize the avrdude settings below first!
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#
|
||||
|
||||
MCU = atmega32
|
||||
F_CPU = 8000000
|
||||
|
||||
# Output format. (can be srec, ihex, binary)
|
||||
FORMAT = ihex
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = main
|
||||
|
||||
SRC = src/$(TARGET).c src/utils.c src/uart.c
|
||||
|
||||
|
||||
# Optimization level, can be [0, 1, 2, 3, s].
|
||||
# 0 = turn off optimization. s = optimize for size.
|
||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
||||
OPT = s
|
||||
|
||||
|
||||
# List any extra directories to look for include files here.
|
||||
# Each directory must be seperated by a space.
|
||||
EXTRAINCDIRS = src/
|
||||
|
||||
|
||||
# Compiler flag to set the C Standard level.
|
||||
# c89 - "ANSI" C
|
||||
# gnu89 - c89 plus GCC extensions
|
||||
# c99 - ISO C99 standard (not yet fully implemented)
|
||||
# gnu99 - c99 plus GCC extensions
|
||||
CSTANDARD = -std=gnu99
|
||||
|
||||
# Place -D or -U options here
|
||||
CDEFS =
|
||||
|
||||
# Place -I options here
|
||||
CINCS =
|
||||
|
||||
|
||||
# Compiler flags.
|
||||
# -O*: optimization level
|
||||
# -f...: tuning, see GCC manual and avr-libc documentation
|
||||
# -Wall...: warning level
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -adhlns...: create assembler listing
|
||||
CFLAGS += $(CDEFS) $(CINCS)
|
||||
CFLAGS += -O$(OPT)
|
||||
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
|
||||
CFLAGS += -Wall -Wstrict-prototypes
|
||||
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
|
||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
||||
CFLAGS += $(CSTANDARD)
|
||||
CFLAGS += -DF_CPU=$(F_CPU) #-DDEBUG
|
||||
|
||||
|
||||
|
||||
# External memory options
|
||||
|
||||
|
||||
# Linker flags.
|
||||
# -Wl,...: tell GCC to pass this to linker.
|
||||
# -Map: create map file
|
||||
# --cref: add cross reference to map file
|
||||
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
|
||||
|
||||
|
||||
# Programming support using avrdude. Settings and variables.
|
||||
AVRDUDE_PROGRAMMER = usbasp
|
||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
|
||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
|
||||
|
||||
AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
|
||||
|
||||
|
||||
# ---------------------------------------------------------------------------
|
||||
|
||||
# Define programs and commands.
|
||||
SHELL = sh
|
||||
CC = avr-gcc
|
||||
OBJCOPY = avr-objcopy
|
||||
OBJDUMP = avr-objdump
|
||||
SIZE = avr-size
|
||||
NM = avr-nm
|
||||
AVRDUDE = avrdude
|
||||
REMOVE = rm -f
|
||||
COPY = cp
|
||||
|
||||
|
||||
|
||||
|
||||
# Define Messages
|
||||
# English
|
||||
MSG_ERRORS_NONE = Errors: none
|
||||
MSG_BEGIN = -------- begin --------
|
||||
MSG_END = -------- end --------
|
||||
MSG_SIZE_BEFORE = Size before:
|
||||
MSG_SIZE_AFTER = Size after:
|
||||
MSG_COFF = Converting to AVR COFF:
|
||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
|
||||
MSG_FLASH = Creating load file for Flash:
|
||||
MSG_EEPROM = Creating load file for EEPROM:
|
||||
MSG_EXTENDED_LISTING = Creating Extended Listing:
|
||||
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
||||
MSG_LINKING = Linking:
|
||||
MSG_COMPILING = Compiling:
|
||||
MSG_ASSEMBLING = Assembling:
|
||||
MSG_CLEANING = Cleaning project:
|
||||
|
||||
|
||||
|
||||
|
||||
# Define all object files.
|
||||
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
|
||||
|
||||
# Define all listing files.
|
||||
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
|
||||
|
||||
|
||||
# Compiler flags to generate dependency files.
|
||||
### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
|
||||
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
|
||||
|
||||
# Combine all necessary flags and optional flags.
|
||||
# Add target processor to flags.
|
||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
|
||||
|
||||
|
||||
# Default target.
|
||||
all: begin gccversion sizebefore build sizeafter finished end
|
||||
|
||||
build: elf hex eep lss sym
|
||||
|
||||
elf: $(TARGET).elf
|
||||
hex: $(TARGET).hex
|
||||
eep: $(TARGET).eep
|
||||
lss: $(TARGET).lss
|
||||
sym: $(TARGET).sym
|
||||
|
||||
|
||||
|
||||
# Eye candy.
|
||||
# AVR Studio 3.x does not check make's exit code but relies on
|
||||
# the following magic strings to be generated by the compile job.
|
||||
begin:
|
||||
@echo
|
||||
@echo $(MSG_BEGIN)
|
||||
|
||||
finished:
|
||||
@echo $(MSG_ERRORS_NONE)
|
||||
|
||||
end:
|
||||
@echo $(MSG_END)
|
||||
@echo
|
||||
|
||||
|
||||
# Display size of file.
|
||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
|
||||
ELFSIZE = $(SIZE) -A $(TARGET).elf
|
||||
sizebefore:
|
||||
@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
|
||||
|
||||
sizeafter:
|
||||
@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
|
||||
|
||||
|
||||
|
||||
# Display compiler version information.
|
||||
gccversion :
|
||||
@$(CC) --version
|
||||
|
||||
|
||||
|
||||
# Program the device.
|
||||
program: $(TARGET).hex $(TARGET).eep
|
||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
|
||||
|
||||
|
||||
# Create final output files (.hex, .eep) from ELF output file.
|
||||
%.hex: %.elf
|
||||
@echo
|
||||
@echo $(MSG_FLASH) $@
|
||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
|
||||
|
||||
%.eep: %.elf
|
||||
@echo
|
||||
@echo $(MSG_EEPROM) $@
|
||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
||||
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
|
||||
|
||||
# Create extended listing file from ELF output file.
|
||||
%.lss: %.elf
|
||||
@echo
|
||||
@echo $(MSG_EXTENDED_LISTING) $@
|
||||
$(OBJDUMP) -h -S $< > $@
|
||||
|
||||
# Create a symbol table from ELF output file.
|
||||
%.sym: %.elf
|
||||
@echo
|
||||
@echo $(MSG_SYMBOL_TABLE) $@
|
||||
$(NM) -n $< > $@
|
||||
|
||||
|
||||
|
||||
# Link: create ELF output file from object files.
|
||||
.SECONDARY : $(TARGET).elf
|
||||
.PRECIOUS : $(OBJ)
|
||||
%.elf: $(OBJ)
|
||||
@echo
|
||||
@echo $(MSG_LINKING) $@
|
||||
$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
|
||||
|
||||
|
||||
# Compile: create object files from C source files.
|
||||
%.o : %.c
|
||||
@echo
|
||||
@echo $(MSG_COMPILING) $<
|
||||
$(CC) -c $(ALL_CFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Compile: create assembler files from C source files.
|
||||
%.s : %.c
|
||||
$(CC) -S $(ALL_CFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Assemble: create object files from assembler source files.
|
||||
%.o : %.S
|
||||
@echo
|
||||
@echo $(MSG_ASSEMBLING) $<
|
||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@
|
||||
|
||||
|
||||
|
||||
# Target: clean project.
|
||||
clean: begin clean_list finished end
|
||||
|
||||
clean_list :
|
||||
@echo
|
||||
@echo $(MSG_CLEANING)
|
||||
$(REMOVE) $(TARGET).hex
|
||||
$(REMOVE) $(TARGET).eep
|
||||
$(REMOVE) $(TARGET).obj
|
||||
$(REMOVE) $(TARGET).cof
|
||||
$(REMOVE) $(TARGET).elf
|
||||
$(REMOVE) $(TARGET).map
|
||||
$(REMOVE) $(TARGET).obj
|
||||
$(REMOVE) $(TARGET).a90
|
||||
$(REMOVE) $(TARGET).sym
|
||||
$(REMOVE) $(TARGET).lnk
|
||||
$(REMOVE) $(TARGET).lss
|
||||
$(REMOVE) $(OBJ)
|
||||
$(REMOVE) $(LST)
|
||||
$(REMOVE) $(SRC:.c=.s)
|
||||
$(REMOVE) $(SRC:.c=.d)
|
||||
$(REMOVE) .dep/*
|
||||
|
||||
|
||||
|
||||
# Include the dependency files.
|
||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
|
||||
|
||||
|
||||
# Listing of phony targets.
|
||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \
|
||||
build elf hex eep lss sym coff extcoff \
|
||||
clean clean_list program
|
||||
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<module type="C++" version="4">
|
||||
<component name="NewModuleRootManager" inherit-compiler-output="true">
|
||||
<exclude-output />
|
||||
<content url="file://$MODULE_DIR$">
|
||||
<sourceFolder url="file://$MODULE_DIR$/src" isTestSource="false" />
|
||||
</content>
|
||||
<orderEntry type="jdk" jdkName="Cpp SDK" jdkType="CppSdk" />
|
||||
<orderEntry type="sourceFolder" forTests="false" />
|
||||
</component>
|
||||
</module>
|
||||
|
||||
Binary file not shown.
|
|
@ -0,0 +1,254 @@
|
|||
#include <stdlib.h>
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#include <util/delay.h>
|
||||
#include <string.h>
|
||||
#include "utils.h"
|
||||
#include "main.h"
|
||||
#include "uart.h"
|
||||
|
||||
#define BUFSIZE 40
|
||||
#define CURRENT_MAX 30000 // 30 Ampere is max
|
||||
|
||||
volatile uint16_t syscounter = 0;
|
||||
volatile uint8_t digitbuffer[6] = { 0,0,0,0,0,0 };
|
||||
volatile uint8_t leddigitbuffer[4] = { 0,0,0,0 };
|
||||
uint8_t digit = 0;
|
||||
uint8_t leddigit = 0;
|
||||
|
||||
// values send over uart from powerboard
|
||||
uint16_t voltage = 0;
|
||||
int16_t current_in = 0;
|
||||
int16_t current_out = 0;
|
||||
uint8_t dumpsw = 0; //TODO: make bitfield
|
||||
uint8_t loadsw = 0; //TODO: make bitfield
|
||||
uint8_t gensw = 0; //TODO: make bitfield
|
||||
uint16_t display = 0;
|
||||
|
||||
uint16_t power_gen = 0;
|
||||
uint16_t power_load = 0;
|
||||
|
||||
unsigned char data_count = 0;
|
||||
unsigned char data_in[BUFSIZE];
|
||||
char command_in[BUFSIZE];
|
||||
|
||||
const uint8_t segment_translate[10] = {
|
||||
63, 6, 91, 79, 102, 109, 125, 7, 127, 111
|
||||
};
|
||||
|
||||
const uint8_t smallbar_translate[9] = {
|
||||
0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff
|
||||
};
|
||||
|
||||
const uint8_t bigbar_translate[15][2] = {
|
||||
{ 0x00, 0xc0},
|
||||
{ 0x00, 0x60},
|
||||
{ 0x00, 0x30},
|
||||
{ 0x00, 0x18},
|
||||
{ 0x00, 0x0c},
|
||||
{ 0x00, 0x06},
|
||||
{ 0x00, 0x03},
|
||||
{ 0x01, 0x01},
|
||||
{ 0x03, 0x00},
|
||||
{ 0x06, 0x00},
|
||||
{ 0x0c, 0x00},
|
||||
{ 0x18, 0x00},
|
||||
{ 0x30, 0x00},
|
||||
{ 0x60, 0x00},
|
||||
{ 0xc0, 0x00}
|
||||
};
|
||||
|
||||
|
||||
|
||||
//static void timer_init(void) {
|
||||
// clock is 8MHz
|
||||
//TCCR1B |= _BV(WGM12) | _BV(CS11) | _BV(CS10) ; // CTC Mode for Timer 1 (16Bit) with prescale of 64
|
||||
//OCR1A = 250; // 500Hz
|
||||
//TIMSK = _BV(OCIE1A);
|
||||
//sei(); // enable interrupts
|
||||
//}
|
||||
// Timer init
|
||||
ISR( TIMER1_COMPA_vect ) // Interruptbehandlungsroutine
|
||||
{
|
||||
OCR1A = 2500-OCR1A; // Das Servosignal wird aus der Differenz von
|
||||
// Periodenlänge (2500*0,008ms=20ms) und letztem
|
||||
// Vergleichswert (OCR1A) gebildet
|
||||
}
|
||||
|
||||
static void ports_init(void) {
|
||||
// make column / digit driver pins to output
|
||||
DDRB = 0b11111100;
|
||||
PORTB = (1<<PB1) | (1<<PB0); // Pullup für PB0 und PB1
|
||||
|
||||
TCCR1A = (1<<COM1A0); // Togglen bei Compare Match
|
||||
TCCR1B = (1<<WGM12) | (1<<CS11); // CTC-Mode; Prescaler 8
|
||||
TIMSK = (1<<OCIE1A); // Timer-Compare Interrupt an
|
||||
// make data ports to output
|
||||
|
||||
}
|
||||
|
||||
void process_command() {
|
||||
if(strstr(command_in,"A") != NULL) {
|
||||
// we have an A and B (from check in work_uart()
|
||||
// so our message should be complete and consist of:
|
||||
// A$voltage,$current_in,$current_out,$power_in,$power_out,loadsw,dumpsw,gensw\n
|
||||
|
||||
//A12.5,65464,00000,00000,00000,1,0,1B
|
||||
|
||||
char *token;
|
||||
uint8_t tokencounter = 0;
|
||||
|
||||
char *start = strrchr(command_in, 'A');
|
||||
|
||||
// remove first (B is ignored by atoi)
|
||||
start++;
|
||||
|
||||
token = strtok(start, ",");
|
||||
|
||||
while( token ) {
|
||||
switch(tokencounter) {
|
||||
case 0:
|
||||
voltage = atoi(token);
|
||||
break;
|
||||
case 1:
|
||||
current_in = atoi(token);
|
||||
break;
|
||||
case 2:
|
||||
current_out = atoi(token);
|
||||
break;
|
||||
case 3:
|
||||
power_gen = atoi(token);
|
||||
break;
|
||||
case 4:
|
||||
power_load = atoi(token);
|
||||
break;
|
||||
case 5:
|
||||
if(atoi(token) == 1) loadsw = 1;
|
||||
else loadsw = 0;
|
||||
break;
|
||||
case 6:
|
||||
if(atoi(token) == 1) dumpsw = 1;
|
||||
else dumpsw = 0;
|
||||
break;
|
||||
case 7:
|
||||
if(atoi(token) == 1) gensw = 1;
|
||||
else gensw = 0;
|
||||
break;
|
||||
}
|
||||
|
||||
tokencounter++;
|
||||
token = strtok(NULL, ",");
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static void work_uart(){
|
||||
unsigned int c = uart_getc();
|
||||
}
|
||||
|
||||
if ( !(c & UART_NO_DATA) ) {
|
||||
data_in[data_count] = c;
|
||||
|
||||
if (data_in[data_count] == 'B') {
|
||||
data_count = 0;
|
||||
|
||||
memcpy(command_in, data_in, BUFSIZE);
|
||||
memset(data_in, 0, BUFSIZE);
|
||||
|
||||
process_command();
|
||||
} else {
|
||||
data_count++;
|
||||
}
|
||||
}
|
||||
}
|
||||
static void set_servo(uint16_t value){
|
||||
|
||||
/// magic need to happen hear
|
||||
display = value;
|
||||
/// magic end
|
||||
OCR1A = display;
|
||||
sei();
|
||||
}
|
||||
|
||||
|
||||
static void demo_display(void) {
|
||||
|
||||
for(uint8_t i = 0; i< 16;i++) {
|
||||
leddigitbuffer[0] = bigbar_translate[i][0];
|
||||
leddigitbuffer[1] = bigbar_translate[i][1];
|
||||
wait(5);
|
||||
}
|
||||
|
||||
for(uint8_t i = 0; i< 9;i++) {
|
||||
leddigitbuffer[2] = smallbar_translate[i];
|
||||
wait(5);
|
||||
}
|
||||
|
||||
for(uint8_t i = 0; i< 9;i++) {
|
||||
leddigitbuffer[3] = smallbar_translate[i];
|
||||
wait(5);
|
||||
}
|
||||
|
||||
for(uint8_t j = 0; j< 3;j++) {
|
||||
for(uint8_t i = 0; i< 6; i++) {
|
||||
digitbuffer[i] = 0xff;
|
||||
}
|
||||
wait(20);
|
||||
for(uint8_t i = 0; i< 6; i++) {
|
||||
digitbuffer[i] = 0x00;
|
||||
}
|
||||
wait(20);
|
||||
}
|
||||
|
||||
for(uint8_t i = 0; i< 3;i++) {
|
||||
leddigitbuffer[i] = 0x00;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
int main(void) {
|
||||
ports_init();
|
||||
timer_init();
|
||||
uart_init(UART_BAUD_SELECT(19200,F_CPU));
|
||||
memset(data_in, 0, BUFSIZE);
|
||||
|
||||
|
||||
demo_display();
|
||||
|
||||
while(1) {
|
||||
|
||||
work_uart();
|
||||
|
||||
if(syscounter >= 100) {
|
||||
uart_putc('a'); // send a to receive values
|
||||
set_servo(power_gen)
|
||||
|
||||
|
||||
|
||||
syscounter = 0;
|
||||
}
|
||||
}
|
||||
|
||||
return(0);
|
||||
}
|
||||
|
||||
// system timer
|
||||
SIGNAL(TIMER1_COMPA_vect) {
|
||||
syscounter++;
|
||||
|
||||
// output to sevensegment and leds
|
||||
// make this here to reduce display flicker
|
||||
digit++;
|
||||
if(digit >5) digit = 0;
|
||||
leddigit++;
|
||||
if(leddigit >3) leddigit = 0;
|
||||
|
||||
SEVENSEG_PORT = digitbuffer[digit];
|
||||
SEVENSEGDIG_PORT = _BV(digit+DIG0);
|
||||
|
||||
LED_PORT = leddigitbuffer[leddigit];
|
||||
LEDDIG_PORT = _BV(leddigit);
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,29 @@
|
|||
#ifndef _main_h
|
||||
#define _main_h
|
||||
|
||||
#define SEVENSEG_PORT PORTA
|
||||
#define SEVENSEG_DDR DDRA
|
||||
|
||||
#define LED_PORT PORTC
|
||||
#define LED_DDR DDRC
|
||||
|
||||
#define DIG0 PD2
|
||||
#define DIG1 PD3
|
||||
#define DIG2 PD4
|
||||
#define DIG3 PD5
|
||||
#define DIG4 PD6
|
||||
#define DIG5 PD7
|
||||
#define LEDS_MID1 PB0
|
||||
#define LEDS_MID2 PB1
|
||||
#define LEDS_LOAD PB2
|
||||
#define LEDS_GEN PB3
|
||||
|
||||
#define SEVENSEGDIG_PORT PORTD
|
||||
#define SEVENSEGDIG_DDR DDRD
|
||||
|
||||
#define LEDDIG_PORT PORTB
|
||||
#define LEDDIG_DDR DDRB
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
|
|
@ -0,0 +1,479 @@
|
|||
/*************************************************************************
|
||||
Title: Interrupt UART library with receive/transmit circular buffers
|
||||
Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury
|
||||
File: $Id: uart.c,v 1.10 2013/06/02 07:27:04 peter Exp $
|
||||
Software: AVR-GCC 4.1, AVR Libc 1.4.6 or higher
|
||||
Hardware: any AVR with built-in UART,
|
||||
License: GNU General Public License
|
||||
|
||||
DESCRIPTION:
|
||||
An interrupt is generated when the UART has finished transmitting or
|
||||
receiving a byte. The interrupt handling routines use circular buffers
|
||||
for buffering received and transmitted data.
|
||||
|
||||
The UART_RX_BUFFER_SIZE and UART_TX_BUFFER_SIZE variables define
|
||||
the buffer size in bytes. Note that these variables must be a
|
||||
power of 2.
|
||||
|
||||
USAGE:
|
||||
Refere to the header file uart.h for a description of the routines.
|
||||
See also example test_uart.c.
|
||||
|
||||
NOTES:
|
||||
Based on Atmel Application Note AVR306
|
||||
|
||||
LICENSE:
|
||||
Copyright (C) 2006 Peter Fleury
|
||||
|
||||
This program is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 2 of the License, or
|
||||
any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
*************************************************************************/
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#include "uart.h"
|
||||
|
||||
|
||||
/*
|
||||
* constants and macros
|
||||
*/
|
||||
|
||||
/* size of RX/TX buffers */
|
||||
#define UART_RX_BUFFER_MASK ( UART_RX_BUFFER_SIZE - 1)
|
||||
#define UART_TX_BUFFER_MASK ( UART_TX_BUFFER_SIZE - 1)
|
||||
|
||||
#if ( UART_RX_BUFFER_SIZE & UART_RX_BUFFER_MASK )
|
||||
#error RX buffer size is not a power of 2
|
||||
#endif
|
||||
#if ( UART_TX_BUFFER_SIZE & UART_TX_BUFFER_MASK )
|
||||
#error TX buffer size is not a power of 2
|
||||
#endif
|
||||
|
||||
#if defined(__AVR_AT90S2313__) \
|
||||
|| defined(__AVR_AT90S4414__) || defined(__AVR_AT90S4434__) \
|
||||
|| defined(__AVR_AT90S8515__) || defined(__AVR_AT90S8535__) \
|
||||
|| defined(__AVR_ATmega103__)
|
||||
/* old AVR classic or ATmega103 with one UART */
|
||||
#define AT90_UART
|
||||
#define UART0_RECEIVE_INTERRUPT UART_RX_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT UART_UDRE_vect
|
||||
#define UART0_STATUS USR
|
||||
#define UART0_CONTROL UCR
|
||||
#define UART0_DATA UDR
|
||||
#define UART0_UDRIE UDRIE
|
||||
#elif defined(__AVR_AT90S2333__) || defined(__AVR_AT90S4433__)
|
||||
/* old AVR classic with one UART */
|
||||
#define AT90_UART
|
||||
#define UART0_RECEIVE_INTERRUPT UART_RX_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT UART_UDRE_vect
|
||||
#define UART0_STATUS UCSRA
|
||||
#define UART0_CONTROL UCSRB
|
||||
#define UART0_DATA UDR
|
||||
#define UART0_UDRIE UDRIE
|
||||
#elif defined(__AVR_ATmega8__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__) \
|
||||
|| defined(__AVR_ATmega323__)
|
||||
/* ATmega with one USART */
|
||||
#define ATMEGA_USART
|
||||
#define UART0_RECEIVE_INTERRUPT USART_RXC_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT USART_UDRE_vect
|
||||
#define UART0_STATUS UCSRA
|
||||
#define UART0_CONTROL UCSRB
|
||||
#define UART0_DATA UDR
|
||||
#define UART0_UDRIE UDRIE
|
||||
#elif defined (__AVR_ATmega8515__) || defined(__AVR_ATmega8535__)
|
||||
#define ATMEGA_USART
|
||||
#define UART0_RECEIVE_INTERRUPT USART_RX_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT USART_UDRE_vect
|
||||
#define UART0_STATUS UCSRA
|
||||
#define UART0_CONTROL UCSRB
|
||||
#define UART0_DATA UDR
|
||||
#define UART0_UDRIE UDRIE
|
||||
#elif defined(__AVR_ATmega163__)
|
||||
/* ATmega163 with one UART */
|
||||
#define ATMEGA_UART
|
||||
#define UART0_RECEIVE_INTERRUPT UART_RX_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT UART_UDRE_vect
|
||||
#define UART0_STATUS UCSRA
|
||||
#define UART0_CONTROL UCSRB
|
||||
#define UART0_DATA UDR
|
||||
#define UART0_UDRIE UDRIE
|
||||
#elif defined(__AVR_ATmega162__)
|
||||
/* ATmega with two USART */
|
||||
#define ATMEGA_USART0
|
||||
#define ATMEGA_USART1
|
||||
#define UART0_RECEIVE_INTERRUPT USART0_RXC_vect
|
||||
#define UART1_RECEIVE_INTERRUPT USART1_RXC_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
|
||||
#define UART1_TRANSMIT_INTERRUPT USART1_UDRE_vect
|
||||
#define UART0_STATUS UCSR0A
|
||||
#define UART0_CONTROL UCSR0B
|
||||
#define UART0_DATA UDR0
|
||||
#define UART0_UDRIE UDRIE0
|
||||
#define UART1_STATUS UCSR1A
|
||||
#define UART1_CONTROL UCSR1B
|
||||
#define UART1_DATA UDR1
|
||||
#define UART1_UDRIE UDRIE1
|
||||
#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
|
||||
/* ATmega with two USART */
|
||||
#define ATMEGA_USART0
|
||||
#define ATMEGA_USART1
|
||||
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
|
||||
#define UART1_RECEIVE_INTERRUPT USART1_RX_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
|
||||
#define UART1_TRANSMIT_INTERRUPT USART1_UDRE_vect
|
||||
#define UART0_STATUS UCSR0A
|
||||
#define UART0_CONTROL UCSR0B
|
||||
#define UART0_DATA UDR0
|
||||
#define UART0_UDRIE UDRIE0
|
||||
#define UART1_STATUS UCSR1A
|
||||
#define UART1_CONTROL UCSR1B
|
||||
#define UART1_DATA UDR1
|
||||
#define UART1_UDRIE UDRIE1
|
||||
#elif defined(__AVR_ATmega161__)
|
||||
/* ATmega with UART */
|
||||
#error "AVR ATmega161 currently not supported by this libaray !"
|
||||
#elif defined(__AVR_ATmega169__)
|
||||
/* ATmega with one USART */
|
||||
#define ATMEGA_USART
|
||||
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
|
||||
#define UART0_STATUS UCSRA
|
||||
#define UART0_CONTROL UCSRB
|
||||
#define UART0_DATA UDR
|
||||
#define UART0_UDRIE UDRIE
|
||||
#elif defined(__AVR_ATmega48__) || defined(__AVR_ATmega88__) || defined(__AVR_ATmega168__) || defined(__AVR_ATmega48P__) || defined(__AVR_ATmega88P__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) \
|
||||
|| defined(__AVR_ATmega3250__) || defined(__AVR_ATmega3290__) ||defined(__AVR_ATmega6450__) || defined(__AVR_ATmega6490__)
|
||||
/* ATmega with one USART */
|
||||
#define ATMEGA_USART0
|
||||
#define UART0_RECEIVE_INTERRUPT USART_RX_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT USART_UDRE_vect
|
||||
#define UART0_STATUS UCSR0A
|
||||
#define UART0_CONTROL UCSR0B
|
||||
#define UART0_DATA UDR0
|
||||
#define UART0_UDRIE UDRIE0
|
||||
#elif defined(__AVR_ATtiny2313__)
|
||||
#define ATMEGA_USART
|
||||
#define UART0_RECEIVE_INTERRUPT USART_RX_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT USART_UDRE_vect
|
||||
#define UART0_STATUS UCSRA
|
||||
#define UART0_CONTROL UCSRB
|
||||
#define UART0_DATA UDR
|
||||
#define UART0_UDRIE UDRIE
|
||||
#elif defined(__AVR_ATmega329__) || \
|
||||
defined(__AVR_ATmega649__) || \
|
||||
defined(__AVR_ATmega325__) || \
|
||||
defined(__AVR_ATmega645__)
|
||||
/* ATmega with one USART */
|
||||
#define ATMEGA_USART0
|
||||
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
|
||||
#define UART0_STATUS UCSR0A
|
||||
#define UART0_CONTROL UCSR0B
|
||||
#define UART0_DATA UDR0
|
||||
#define UART0_UDRIE UDRIE0
|
||||
#elif defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega640__)
|
||||
/* ATmega with two USART */
|
||||
#define ATMEGA_USART0
|
||||
#define ATMEGA_USART1
|
||||
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
|
||||
#define UART1_RECEIVE_INTERRUPT USART1_RX_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
|
||||
#define UART1_TRANSMIT_INTERRUPT USART1_UDRE_vect
|
||||
#define UART0_STATUS UCSR0A
|
||||
#define UART0_CONTROL UCSR0B
|
||||
#define UART0_DATA UDR0
|
||||
#define UART0_UDRIE UDRIE0
|
||||
#define UART1_STATUS UCSR1A
|
||||
#define UART1_CONTROL UCSR1B
|
||||
#define UART1_DATA UDR1
|
||||
#define UART1_UDRIE UDRIE1
|
||||
#elif defined(__AVR_ATmega644__)
|
||||
/* ATmega with one USART */
|
||||
#define ATMEGA_USART0
|
||||
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
|
||||
#define UART0_STATUS UCSR0A
|
||||
#define UART0_CONTROL UCSR0B
|
||||
#define UART0_DATA UDR0
|
||||
#define UART0_UDRIE UDRIE0
|
||||
#elif defined(__AVR_ATmega164P__) || defined(__AVR_ATmega324P__) || defined(__AVR_ATmega644P__)
|
||||
/* ATmega with two USART */
|
||||
#define ATMEGA_USART0
|
||||
#define ATMEGA_USART1
|
||||
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
|
||||
#define UART1_RECEIVE_INTERRUPT USART1_RX_vect
|
||||
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
|
||||
#define UART1_TRANSMIT_INTERRUPT USART1_UDRE_vect
|
||||
#define UART0_STATUS UCSR0A
|
||||
#define UART0_CONTROL UCSR0B
|
||||
#define UART0_DATA UDR0
|
||||
#define UART0_UDRIE UDRIE0
|
||||
#define UART1_STATUS UCSR1A
|
||||
#define UART1_CONTROL UCSR1B
|
||||
#define UART1_DATA UDR1
|
||||
#define UART1_UDRIE UDRIE1
|
||||
#else
|
||||
#error "no UART definition for MCU available"
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* module global variables
|
||||
*/
|
||||
static volatile unsigned char UART_TxBuf[UART_TX_BUFFER_SIZE];
|
||||
static volatile unsigned char UART_RxBuf[UART_RX_BUFFER_SIZE];
|
||||
static volatile unsigned char UART_TxHead;
|
||||
static volatile unsigned char UART_TxTail;
|
||||
static volatile unsigned char UART_RxHead;
|
||||
static volatile unsigned char UART_RxTail;
|
||||
static volatile unsigned char UART_LastRxError;
|
||||
|
||||
#if defined( ATMEGA_USART1 )
|
||||
static volatile unsigned char UART1_TxBuf[UART_TX_BUFFER_SIZE];
|
||||
static volatile unsigned char UART1_RxBuf[UART_RX_BUFFER_SIZE];
|
||||
static volatile unsigned char UART1_TxHead;
|
||||
static volatile unsigned char UART1_TxTail;
|
||||
static volatile unsigned char UART1_RxHead;
|
||||
static volatile unsigned char UART1_RxTail;
|
||||
static volatile unsigned char UART1_LastRxError;
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
ISR (UART0_RECEIVE_INTERRUPT)
|
||||
/*************************************************************************
|
||||
Function: UART Receive Complete interrupt
|
||||
Purpose: called when the UART has received a character
|
||||
**************************************************************************/
|
||||
{
|
||||
unsigned char tmphead;
|
||||
unsigned char data;
|
||||
unsigned char usr;
|
||||
unsigned char lastRxError;
|
||||
|
||||
|
||||
/* read UART status register and UART data register */
|
||||
usr = UART0_STATUS;
|
||||
data = UART0_DATA;
|
||||
|
||||
/* */
|
||||
#if defined( AT90_UART )
|
||||
lastRxError = (usr & (_BV(FE)|_BV(DOR)) );
|
||||
#elif defined( ATMEGA_USART )
|
||||
lastRxError = (usr & (_BV(FE)|_BV(DOR)) );
|
||||
#elif defined( ATMEGA_USART0 )
|
||||
lastRxError = (usr & (_BV(FE0)|_BV(DOR0)) );
|
||||
#elif defined ( ATMEGA_UART )
|
||||
lastRxError = (usr & (_BV(FE)|_BV(DOR)) );
|
||||
#endif
|
||||
|
||||
/* calculate buffer index */
|
||||
tmphead = ( UART_RxHead + 1) & UART_RX_BUFFER_MASK;
|
||||
|
||||
if ( tmphead == UART_RxTail ) {
|
||||
/* error: receive buffer overflow */
|
||||
lastRxError = UART_BUFFER_OVERFLOW >> 8;
|
||||
}else{
|
||||
/* store new index */
|
||||
UART_RxHead = tmphead;
|
||||
/* store received data in buffer */
|
||||
UART_RxBuf[tmphead] = data;
|
||||
}
|
||||
UART_LastRxError |= lastRxError;
|
||||
}
|
||||
|
||||
|
||||
ISR (UART0_TRANSMIT_INTERRUPT)
|
||||
/*************************************************************************
|
||||
Function: UART Data Register Empty interrupt
|
||||
Purpose: called when the UART is ready to transmit the next byte
|
||||
**************************************************************************/
|
||||
{
|
||||
unsigned char tmptail;
|
||||
|
||||
|
||||
if ( UART_TxHead != UART_TxTail) {
|
||||
/* calculate and store new buffer index */
|
||||
tmptail = (UART_TxTail + 1) & UART_TX_BUFFER_MASK;
|
||||
UART_TxTail = tmptail;
|
||||
/* get one byte from buffer and write it to UART */
|
||||
UART0_DATA = UART_TxBuf[tmptail]; /* start transmission */
|
||||
}else{
|
||||
/* tx buffer empty, disable UDRE interrupt */
|
||||
UART0_CONTROL &= ~_BV(UART0_UDRIE);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
Function: uart_init()
|
||||
Purpose: initialize UART and set baudrate
|
||||
Input: baudrate using macro UART_BAUD_SELECT()
|
||||
Returns: none
|
||||
**************************************************************************/
|
||||
void uart_init(unsigned int baudrate)
|
||||
{
|
||||
UART_TxHead = 0;
|
||||
UART_TxTail = 0;
|
||||
UART_RxHead = 0;
|
||||
UART_RxTail = 0;
|
||||
|
||||
#if defined( AT90_UART )
|
||||
/* set baud rate */
|
||||
UBRR = (unsigned char)baudrate;
|
||||
|
||||
/* enable UART receiver and transmmitter and receive complete interrupt */
|
||||
UART0_CONTROL = _BV(RXCIE)|_BV(RXEN)|_BV(TXEN);
|
||||
|
||||
#elif defined (ATMEGA_USART)
|
||||
/* Set baud rate */
|
||||
if ( baudrate & 0x8000 )
|
||||
{
|
||||
UART0_STATUS = (1<<U2X); //Enable 2x speed
|
||||
baudrate &= ~0x8000;
|
||||
}
|
||||
UBRRH = (unsigned char)(baudrate>>8);
|
||||
UBRRL = (unsigned char) baudrate;
|
||||
|
||||
/* Enable USART receiver and transmitter and receive complete interrupt */
|
||||
UART0_CONTROL = _BV(RXCIE)|(1<<RXEN)|(1<<TXEN);
|
||||
|
||||
/* Set frame format: asynchronous, 8data, no parity, 1stop bit */
|
||||
#ifdef URSEL
|
||||
UCSRC = (1<<URSEL)|(3<<UCSZ0);
|
||||
#else
|
||||
UCSRC = (3<<UCSZ0);
|
||||
#endif
|
||||
|
||||
#elif defined (ATMEGA_USART0 )
|
||||
/* Set baud rate */
|
||||
if ( baudrate & 0x8000 )
|
||||
{
|
||||
UART0_STATUS = (1<<U2X0); //Enable 2x speed
|
||||
baudrate &= ~0x8000;
|
||||
}
|
||||
UBRR0H = (unsigned char)(baudrate>>8);
|
||||
UBRR0L = (unsigned char) baudrate;
|
||||
|
||||
/* Enable USART receiver and transmitter and receive complete interrupt */
|
||||
UART0_CONTROL = _BV(RXCIE0)|(1<<RXEN0)|(1<<TXEN0);
|
||||
|
||||
/* Set frame format: asynchronous, 8data, no parity, 1stop bit */
|
||||
#ifdef URSEL0
|
||||
UCSR0C = (1<<URSEL0)|(3<<UCSZ00);
|
||||
#else
|
||||
UCSR0C = (3<<UCSZ00);
|
||||
#endif
|
||||
|
||||
#elif defined ( ATMEGA_UART )
|
||||
/* set baud rate */
|
||||
if ( baudrate & 0x8000 )
|
||||
{
|
||||
UART0_STATUS = (1<<U2X); //Enable 2x speed
|
||||
baudrate &= ~0x8000;
|
||||
}
|
||||
UBRRHI = (unsigned char)(baudrate>>8);
|
||||
UBRR = (unsigned char) baudrate;
|
||||
|
||||
/* Enable UART receiver and transmitter and receive complete interrupt */
|
||||
UART0_CONTROL = _BV(RXCIE)|(1<<RXEN)|(1<<TXEN);
|
||||
|
||||
#endif
|
||||
|
||||
}/* uart_init */
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
Function: uart_getc()
|
||||
Purpose: return byte from ringbuffer
|
||||
Returns: lower byte: received byte from ringbuffer
|
||||
higher byte: last receive error
|
||||
**************************************************************************/
|
||||
unsigned int uart_getc(void)
|
||||
{
|
||||
unsigned char tmptail;
|
||||
unsigned char data;
|
||||
|
||||
|
||||
if ( UART_RxHead == UART_RxTail ) {
|
||||
return UART_NO_DATA; /* no data available */
|
||||
}
|
||||
|
||||
/* calculate /store buffer index */
|
||||
tmptail = (UART_RxTail + 1) & UART_RX_BUFFER_MASK;
|
||||
UART_RxTail = tmptail;
|
||||
|
||||
/* get data from receive buffer */
|
||||
data = UART_RxBuf[tmptail];
|
||||
|
||||
data = (UART_LastRxError << 8) + data;
|
||||
UART_LastRxError = 0;
|
||||
return data;
|
||||
|
||||
}/* uart_getc */
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
Function: uart_putc()
|
||||
Purpose: write byte to ringbuffer for transmitting via UART
|
||||
Input: byte to be transmitted
|
||||
Returns: none
|
||||
**************************************************************************/
|
||||
void uart_putc(unsigned char data)
|
||||
{
|
||||
unsigned char tmphead;
|
||||
|
||||
|
||||
tmphead = (UART_TxHead + 1) & UART_TX_BUFFER_MASK;
|
||||
|
||||
while ( tmphead == UART_TxTail ){
|
||||
;/* wait for free space in buffer */
|
||||
}
|
||||
|
||||
UART_TxBuf[tmphead] = data;
|
||||
UART_TxHead = tmphead;
|
||||
|
||||
/* enable UDRE interrupt */
|
||||
UART0_CONTROL |= _BV(UART0_UDRIE);
|
||||
return 0;
|
||||
|
||||
}/* uart_putc */
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
Function: uart_puts()
|
||||
Purpose: transmit string to UART
|
||||
Input: string to be transmitted
|
||||
Returns: none
|
||||
**************************************************************************/
|
||||
void uart_puts(const char *s )
|
||||
{
|
||||
while (*s)
|
||||
uart_putc(*s++);
|
||||
|
||||
}/* uart_puts */
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
Function: uart_puts_p()
|
||||
Purpose: transmit string from program memory to UART
|
||||
Input: program memory string to be transmitted
|
||||
Returns: none
|
||||
**************************************************************************/
|
||||
void uart_puts_p(const char *progmem_s )
|
||||
{
|
||||
register char c;
|
||||
|
||||
while ( (c = pgm_read_byte(progmem_s++)) )
|
||||
uart_putc(c);
|
||||
|
||||
}/* uart_puts_p */
|
||||
|
||||
|
|
@ -0,0 +1,180 @@
|
|||
#ifndef UART_H
|
||||
#define UART_H
|
||||
/************************************************************************
|
||||
Title: Interrupt UART library with receive/transmit circular buffers
|
||||
Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury
|
||||
File: $Id: uart.h,v 1.12 2012/11/19 19:52:27 peter Exp $
|
||||
Software: AVR-GCC 4.1, AVR Libc 1.4
|
||||
Hardware: any AVR with built-in UART, tested on AT90S8515 & ATmega8 at 4 Mhz
|
||||
License: GNU General Public License
|
||||
Usage: see Doxygen manual
|
||||
|
||||
LICENSE:
|
||||
Copyright (C) 2006 Peter Fleury
|
||||
|
||||
This program is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 2 of the License, or
|
||||
any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
************************************************************************/
|
||||
|
||||
/**
|
||||
* @defgroup pfleury_uart UART Library
|
||||
* @code #include <uart.h> @endcode
|
||||
*
|
||||
* @brief Interrupt UART library using the built-in UART with transmit and receive circular buffers.
|
||||
*
|
||||
* This library can be used to transmit and receive data through the built in UART.
|
||||
*
|
||||
* An interrupt is generated when the UART has finished transmitting or
|
||||
* receiving a byte. The interrupt handling routines use circular buffers
|
||||
* for buffering received and transmitted data.
|
||||
*
|
||||
* The UART_RX_BUFFER_SIZE and UART_TX_BUFFER_SIZE constants define
|
||||
* the size of the circular buffers in bytes. Note that these constants must be a power of 2.
|
||||
* You may need to adapt this constants to your target and your application by adding
|
||||
* CDEFS += -DUART_RX_BUFFER_SIZE=nn -DUART_RX_BUFFER_SIZE=nn to your Makefile.
|
||||
*
|
||||
* @note Based on Atmel Application Note AVR306
|
||||
* @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury
|
||||
*/
|
||||
|
||||
/**@{*/
|
||||
|
||||
|
||||
#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304
|
||||
#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !"
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
** constants and macros
|
||||
*/
|
||||
|
||||
/** @brief UART Baudrate Expression
|
||||
* @param xtalcpu system clock in Mhz, e.g. 4000000UL for 4Mhz
|
||||
* @param baudrate baudrate in bps, e.g. 1200, 2400, 9600
|
||||
*/
|
||||
#define UART_BAUD_SELECT(baudRate,xtalCpu) (((xtalCpu) + 8UL * (baudRate)) / (16UL * (baudRate)) -1UL)
|
||||
|
||||
/** @brief UART Baudrate Expression for ATmega double speed mode
|
||||
* @param xtalcpu system clock in Mhz, e.g. 4000000UL for 4Mhz
|
||||
* @param baudrate baudrate in bps, e.g. 1200, 2400, 9600
|
||||
*/
|
||||
#define UART_BAUD_SELECT_DOUBLE_SPEED(baudRate,xtalCpu) ( ((((xtalCpu) + 4UL * (baudRate)) / (8UL * (baudRate)) -1UL)) | 0x8000)
|
||||
|
||||
|
||||
/** Size of the circular receive buffer, must be power of 2 */
|
||||
#ifndef UART_RX_BUFFER_SIZE
|
||||
#define UART_RX_BUFFER_SIZE 32
|
||||
#endif
|
||||
/** Size of the circular transmit buffer, must be power of 2 */
|
||||
#ifndef UART_TX_BUFFER_SIZE
|
||||
#define UART_TX_BUFFER_SIZE 32
|
||||
#endif
|
||||
|
||||
/* test if the size of the circular buffers fits into SRAM */
|
||||
#if ( (UART_RX_BUFFER_SIZE+UART_TX_BUFFER_SIZE) >= (RAMEND-0x60 ) )
|
||||
#error "size of UART_RX_BUFFER_SIZE + UART_TX_BUFFER_SIZE larger than size of SRAM"
|
||||
#endif
|
||||
|
||||
/*
|
||||
** high byte error return code of uart_getc()
|
||||
*/
|
||||
#define UART_FRAME_ERROR 0x1000 /* Framing Error by UART */
|
||||
#define UART_OVERRUN_ERROR 0x0800 /* Overrun condition by UART */
|
||||
#define UART_PARITY_ERROR 0x0400 /* Parity Error by UART */
|
||||
#define UART_BUFFER_OVERFLOW 0x0200 /* receive ringbuffer overflow */
|
||||
#define UART_NO_DATA 0x0100 /* no receive data available */
|
||||
|
||||
|
||||
/*
|
||||
** function prototypes
|
||||
*/
|
||||
|
||||
/**
|
||||
@brief Initialize UART and set baudrate
|
||||
@param baudrate Specify baudrate using macro UART_BAUD_SELECT()
|
||||
@return none
|
||||
*/
|
||||
extern void uart_init(unsigned int baudrate);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Get received byte from ringbuffer
|
||||
*
|
||||
* Returns in the lower byte the received character and in the
|
||||
* higher byte the last receive error.
|
||||
* UART_NO_DATA is returned when no data is available.
|
||||
*
|
||||
* @param void
|
||||
* @return lower byte: received byte from ringbuffer
|
||||
* @return higher byte: last receive status
|
||||
* - \b 0 successfully received data from UART
|
||||
* - \b UART_NO_DATA
|
||||
* <br>no receive data available
|
||||
* - \b UART_BUFFER_OVERFLOW
|
||||
* <br>Receive ringbuffer overflow.
|
||||
* We are not reading the receive buffer fast enough,
|
||||
* one or more received character have been dropped
|
||||
* - \b UART_OVERRUN_ERROR
|
||||
* <br>Overrun condition by UART.
|
||||
* A character already present in the UART UDR register was
|
||||
* not read by the interrupt handler before the next character arrived,
|
||||
* one or more received characters have been dropped.
|
||||
* - \b UART_FRAME_ERROR
|
||||
* <br>Framing Error by UART
|
||||
*/
|
||||
extern unsigned int uart_getc(void);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Put byte to ringbuffer for transmitting via UART
|
||||
* @param data byte to be transmitted
|
||||
* @return none
|
||||
*/
|
||||
extern void uart_putc(unsigned char data);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Put string to ringbuffer for transmitting via UART
|
||||
*
|
||||
* The string is buffered by the uart library in a circular buffer
|
||||
* and one character at a time is transmitted to the UART using interrupts.
|
||||
* Blocks if it can not write the whole string into the circular buffer.
|
||||
*
|
||||
* @param s string to be transmitted
|
||||
* @return none
|
||||
*/
|
||||
extern void uart_puts(const char *s );
|
||||
|
||||
|
||||
/**
|
||||
* @brief Put string from program memory to ringbuffer for transmitting via UART.
|
||||
*
|
||||
* The string is buffered by the uart library in a circular buffer
|
||||
* and one character at a time is transmitted to the UART using interrupts.
|
||||
* Blocks if it can not write the whole string into the circular buffer.
|
||||
*
|
||||
* @param s program memory string to be transmitted
|
||||
* @return none
|
||||
* @see uart_puts_P
|
||||
*/
|
||||
extern void uart_puts_p(const char *s );
|
||||
|
||||
/**
|
||||
* @brief Macro to automatically put a string constant into program memory
|
||||
*/
|
||||
#define uart_puts_P(__s) uart_puts_p(PSTR(__s))
|
||||
|
||||
|
||||
|
||||
|
||||
#endif // UART_H
|
||||
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
#include <avr/io.h>
|
||||
#include <util/delay.h>
|
||||
#include "uart.h"
|
||||
|
||||
void wait(uint8_t count) {
|
||||
uint8_t i;
|
||||
if(count == 0) count = 100;
|
||||
for(i=0;i<count;i++) {
|
||||
_delay_ms(10);
|
||||
}
|
||||
}
|
||||
|
||||
void uart_print_voltage(uint16_t x) {
|
||||
uart_putc(48 + (x / 10000));
|
||||
uart_putc(48 + (x % 10000 /1000));
|
||||
uart_putc('.');
|
||||
uart_putc(48 + (x % 1000 / 100 ));
|
||||
//uart_putc(48 + (x % 100 / 10 ));
|
||||
//uart_putc(48 + (x % 10));
|
||||
}
|
||||
|
||||
void uart_print_int16(int16_t x) {
|
||||
if(x <0) uart_putc('-');
|
||||
uart_putc(48 + (x / 10000));
|
||||
uart_putc(48 + (x % 10000 /1000));
|
||||
uart_putc(48 + (x % 1000 / 100 ));
|
||||
uart_putc(48 + (x % 100 / 10 ));
|
||||
uart_putc(48 + (x % 10));
|
||||
}
|
||||
|
||||
void uart_print_uint16(uint16_t x) {
|
||||
uart_putc(48 + (x / 10000));
|
||||
uart_putc(48 + (x % 10000 /1000));
|
||||
uart_putc(48 + (x % 1000 / 100 ));
|
||||
uart_putc(48 + (x % 100 / 10 ));
|
||||
uart_putc(48 + (x % 10));
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
#ifndef _utils_h
|
||||
#define _utils_h
|
||||
|
||||
extern void wait(uint8_t count);
|
||||
extern void uart_print_voltage(uint16_t);
|
||||
extern void uart_print_int16(int16_t);
|
||||
extern void uart_print_uint16(uint16_t);
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
Loading…
Reference in New Issue