meter, mapping und co.

examples/dialtoserial/dialtoserial.ino

@@ -7,6 +7,8 @@
 #define PIN_PULSE	D5
 #define FW_NAME "esp-waehlscheibe"
 #define FW_VERSION "1.0.0"
+#define MINMAP 0
+#define MAXMAP 500
 
 HomieNode dialNode("dial", "dialnode");
 RotaryDialer dialer = RotaryDialer(PIN_READY, PIN_PULSE);
@@ -14,7 +16,8 @@ RotaryDialer dialer = RotaryDialer(PIN_READY, PIN_PULSE);
 bool meterHandler(const HomieRange& range, const String& value) {
   Homie.getLogger() << "meter " << ": " << value << endl;
   int iValue = value.toInt();
-  if ((iValue >= 0) && (iValue <=100))
+  // if ((iValue >= 0) && (iValue <=9000))
+  if ((iValue >= 0) && (iValue <=30000))
   {
     setMeter(value.toInt());
     dialNode.setProperty("meter").send(value);
@@ -27,7 +30,7 @@ bool meterHandler(const HomieRange& range, const String& value) {
 bool numberHandler(const HomieRange& range, const String& value) {
   Homie.getLogger() << "number " << ": " << value << endl;
   int iValue = value.toInt();
-  if ((iValue >= 0) && (iValue <=100))
+  if ((iValue >= 0) && (iValue <=10))
   {
     setNumber(value.toInt());
     dialNode.setProperty("number").send(value);
@@ -37,6 +40,19 @@ bool numberHandler(const HomieRange& range, const String& value) {
   }
 }
 
+bool rawHandler(const HomieRange& range, const String& value) {
+  Homie.getLogger() << "raw " << ": " << value << endl;
+  int iValue = value.toInt();
+  if ((iValue >= 0) && (iValue <=1024))
+  {
+    setRaw(value.toInt());
+    dialNode.setProperty("raw").send(value);
+    return true;
+  } else {
+    return false;
+  }
+}
+
 void setup() {
 	Serial.begin(115200);
 	dialer.setup();
@@ -45,6 +61,7 @@ void setup() {
   dialNode.advertise("dialed");
   dialNode.advertise("meter").settable(meterHandler);
   dialNode.advertise("number").settable(numberHandler);
+  dialNode.advertise("raw").settable(rawHandler);
   Homie.setLoopFunction(loopHandler);
    Homie.setup();
      ArduinoOTA.setHostname(Homie.getConfiguration().deviceId);
@@ -66,11 +83,87 @@ void loop() {
 	}
 }
 
+void setRaw(int pos){
+  analogWrite(D1,pos);
+}
+
 void setMeter(int pos){
-  analogWrite(D1,map(pos,0,100,9,462));
+  // analogWrite(D1,map(pos,0,100,MINMAP,MAXMAP));
+  // Range: 0 - 9000
+  // Output: 0 - 495
+  if (pos<1000) {
+    analogWrite(D1,map(pos,0,1000,0,75));
+    return;
+  }
+  if (pos<2000) {
+    analogWrite(D1,map(pos,1000,2000,75,125));
+    return;
+  }
+  if (pos<3000) {
+    analogWrite(D1,map(pos,2000,3000,125,175));
+    return;
+  }
+  if (pos<4000) {
+    analogWrite(D1,map(pos,3000,4000,175,225));
+    return;
+  }
+  if (pos<5000) {
+    analogWrite(D1,map(pos,4000,5000,225,270));
+    return;
+  }
+  if (pos<6000) {
+    analogWrite(D1,map(pos,5000,6000,270,330));
+    return;
+  }
+  if (pos<7000) {
+    analogWrite(D1,map(pos,6000,7000,330,380));
+    return;
+  }
+  if (pos<8000) {
+    analogWrite(D1,map(pos,7000,8000,380,427));
+    return;
+  }
+  if (pos<9000) {
+    analogWrite(D1,map(pos,8000,9000,427,495));
+    return;
+  }
+  analogWrite(D1,495);
 }
 
 void setNumber(int pos){
-  analogWrite(D1,map(pos,0,9,9,462));
+  // analogWrite(D1,map(pos,0,9,MINMAP,MAXMAP));
+  switch (pos){
+    case 0:
+      analogWrite(D1,0);
+      break;
+    case 1:
+      analogWrite(D1,75);
+      break;
+    case 2:
+      analogWrite(D1,125);
+      break;
+    case 3:
+      analogWrite(D1,175);
+      break;
+    case 4:
+      analogWrite(D1,225);
+      break;
+    case 5:
+      analogWrite(D1,270);
+      break;
+    case 6:
+      analogWrite(D1,330);
+      break;
+    case 7:
+      analogWrite(D1,380);
+      break;
+    case 8:
+      analogWrite(D1,427);
+      break;
+    case 9:
+      analogWrite(D1,495);
+      break;
+  }
+    
 }